Since self-efficacy was suggested by Bandura(1977) as the most important factor that affects human behavior, preceding studies about self-efficacy are frequently related with children, and it is a main stream that only personal factors are chosen as related factors of these studies. Considering we don't have enough studies about family factors that reflect qualitative and relational factors of adolescents' home background, this study was aimed to seize the actual condition of self-efficacy meaning perceived and emotional faith about their own ability. These are our major concerns: 1. What kind of tendency does self-efficacy and appearance stress of adolescents, family functioning show? 2. How strong are relative influences of variables on self-efficacy of adolescents? This study was operated on July and August, 2002, aimed 378 middle school and high school students in Jeon-Nam, Mokpo area. 378 question sheets were used for analysis. Followings are results of this study. First, aimed students' average mark of self-efficacy was 2.09, which meant a normal level. And in low-ranked part, self-control-efficacy was the highest, and confidence task difficulty preference was following. Furthermore, whole self-efficacy showed a little difference from the demographic factor of adolescents. In low-ranked part, however, confidence and self-efficacy showed a somewhat difference. As students grew up, confidence decreased, and male students showed higher self-control-efficacy than female ones. Second, appearance stress and family functioning degree had a strong relation with self-efficacy. Family functioning, had important interrelation not only with whole self-efficacy but also with low-ranked part of self-efficacy. In low-ranked part, self-control-efficacy and task difficulty preference were proportional to the family functioning degree. From these results, we can find that the appearance stress was an actual factor that affected the self-efficacy of adolescents, and their self-efficacy was strongly related with family functioning degree. Accordingly, affirmative emotion in family, harmonic communication among family members and sharing housekeeping works had an immediate influence on elevation of self-efficacy.
This paper presents the FEM analysis results on the strength safety of a gas valve for a LPG cylinder. Based on the FEM analysis, the maximum von Mises stress on the boundary zone between a safety valve and the upper area of the thread is 99.2 MPa for the supplied gas pressure of 3.5 MPa in which the gas valve is fully opened. The maximum von Mises stress of 99.2 MPa is considered as safety value, because that value is lower than the yield stress of a brass material. In this case, the maximum deformation at the upper right part of the pressure regulator is 0.002mm. The maximum deformation zone is not a meaning part of the sealing part such as an O-ring or a diaphragm of a gas valve and a pressure regulator. The proposed hybrid gas valve model in which is integrated with a conventional cut-off valve and a pressure regulator is recommended as a gas leakage free mechanism and minimized compact size for a LPG cylinder.
The purpose of this study was to investigate the stress distribution and intensity derived from the transpalatal lingual arch in the investing bone composed of photoelastic material(PL-3). The transpalatal lingual arch wire was deflected in the horizontal and vertical direction to give the various conditions. The two-dimensional photoelastic stress analysis was performed, and the stress distrebution was recored by photography The results were as follows: 1. In bilateral expansion, as horizontal deflection was singly applied, the stress was more concentrated on the root apex in square free end than round. In square free end, as vertical deflection was increased gradually, the black line meaning center of rotation moved inferiorly together with the increment of whole fringes. 2. In application of vertical deflection on anchorage side for unilateral expansion, the stress distribution that expansive force leaned to expansion side was observed. As vortical deflection increased, the extruding stress was observed on molar of expansion side. And as horizontal deflection increased, the tipping stress on the molar of anchorage side was observed. 3. In unilateral rotation with the asymmetric toe-in, the fringe appeared on the distal aspect of root apex.
This study research the effect that the reality therapy program reduces the occupational stress in company employee. The subjects of this research were company employees aged 30 to 49 in the A area and they work more than 2 years in company. They were divided into two groups: an experimental group of 10 company employee, and a control groups of 10 company employee. and executed the program to the experiment group. A measurement tool was used a standard occupational stress scale for korean employee that developed by The Korean Society of Occupational Stress. For the purpose of the study, it was t-test to analyze collected data. The result of the study was that the occupational stress in an experiment group which take part in the reality therapy program was meaning statistically reduced than the control group by p<.001. In the subordinate measure of occupational stress, the occupational demand, organization system, requital inappropriateness score has a significant result by p<.01 and the occupational self-regulation, relation discord, and occupational insecurity score has a significant result by p<.05. In sum, the occupational stress score of treatment group which take part in the reality program reduce significantly than the scores of control group. Thus, the reality therapy program significantly effect to reduced the company employee's occupational stress.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.26
no.6
/
pp.636-643
/
2000
Facial asymmetry is the most frequent disease in craniofacial deformities. And the primary causing area of that is mostly placing in mandible. That is to say, it is known that primarily, mandible grows excessively or deficiently, and other facial region involving maxilla undergoes compensatory growth secondarily, so asymmetric face develops. In facial asymmetry, the surgical correction of undergrowth is more difficult than that of overgrowth and the reason of it is the postoperative relapse caused by stress of surrounding soft tissues. It means the stress of surrounding soft tissues occurring after bone lengthening and reducing above stress is the same meaning with reducing postoperative relapse. Among various areas, mandibular ramus is the most difficult area to lengthen vertically and maintain its length. The reason of it is considered by many authors as the stress of surrounding pterygomasseteric sling which is enveloping lower border of mandible and interrupting elongation of ramal height. So we applied two different surgical procedures in which pterygomasseteric slings have different stress respectively to monkeys which have similar masticatory function and anatomy to human being and compared relapse by radiographic film and observed periodically the histochemical change of masseteric muscle fiber. So we could see the following results. The relapse was less in EVRO group in which we separated pterygomasseric sling in inferior border and didn't approximate muscle sling after vertical lengthening to minimize the stress of soft tissues than IVRO group in which we elongated ramal height preserving pterygomassetric sling. Of course, we could see a problem in EVRO group such as bone resorption in inferior border caused by uncovering the periosteum of inferior border. But we expect that such problem will be solved by developing periosteum substitutes for covering the exposed bone and minimizing the surgical trauma. In histochemical study of masseteric muscle fiber, the fiber constituents of EVRO group in which we minimized soft tissue stress was changed immediately after operation and maintained it for 1 year, whereas that of IVRO group in which we preserved soft tissue stress was changed in more portion after operation and recovered it by 1 year. By the histochemical results, we can see that the recovery of fiber constituents reflect the recovery of muscle stress and it is closely related with relapse phenomenon.
The recombinant bioluminescent Escherichia coli strains, DPD2511 and TV 1061 containing the katG and grpE promoters, respectively, from Vibrio fischeri fused to luxCDABE, were used to detect the adaptive and repair responses to oxidative damage caused by hydrogen peroxide $(H_2O_2)$, and protein damage due to phenol. The response ratio, represented as the bioluminescence induced in subsequent inductions of DPD2511 and TV1061 with the mother cells previously induced by each chemical, i.e., $H_2O_2$ and phenol during the previous induction stage, decreased suddenly compared with the ratio of the control culture of each strain, meaning there is a possible adaptive response to stress caused by chemicals. Protein damage due to phenol was completely repaired by the second culturing after the initial induction, as was oxidative damage caused by $H_2O_2$ which was also rapidly repaired, as detected by the recovery of bioluminescence level. This result suggests that E. coli promptly adapt and repair oxidative and protein damage by $H_2O_2$ and phenol completely.
Journal of the Korean Society of Manufacturing Process Engineers
/
v.13
no.1
/
pp.45-51
/
2014
Generally, marine transmissions contain straight shafts and helical gears, meaning that enginerooms require more space. In order to guarantee a levelengine space for conical involute gears or beveloid gears, both of which are important machine parts, a conical gear was used to replace the traditional cylinder gear. Owing to weak points such as the point contact phenomenon of the teeth, a limitation of the width of each tooth in terms of the addendum, the variational modification coefficient,and the difficulty of processing, research about conical involute gears remains at a standstill. Along with the increasing number of applications of conical involute gears, research on conical gear design technology is necessary. In this paper, in an effort to enhance conical gear design technology, research on the 3D modeling and stress analyses of helical conical involute gears were done.
After we looked back on the process western psychotherapy, and consider current meaning and necessity of buddhism. we concluded as follows 1. We can apply buddhism to psychotherapy in terms of oriental medicine. Especially buddhism with long history in the orient has similarity with oriental medicine and common cultural background. therefore it will be useful especially to koreans 2. Whereas buddhism's object is Nirvana, that of medicine is to return to the above view. to apply various methodologies of buddhism to psychology of oriental medicine you must select useful parts and drop others 3. Whereas buddhism centers on human mind, oriental medicine wholly describes body and mind without separation, buddhism put stress on inside of consciousness and oriental medicine put stress on revealing process 4. It is difficult to combine buddhism to oriental medicine theoretically. In combining it is easier to accept buddhism practically rather than theoretically 5. To apply buddhism clinically we have to modify buddhism to modern societies and to research and discussion to combine it to the system of oriental medicine
Purpose: To examine nursing students' experiences in visiting care practice in community. Method: According to phenomenological method and Collaizzi's data analysis, all data were collected from March to June 2002 through written daily reports by 56 students in the visiting care unit of four public health centers. Four researchers had sought the daily reports for significant data. Result: In the research, 118 significant statements were selected and 33 subject groups were organized from the statements. From the 33 groups were identified 10 categories finally. which were as follows: stress, reflecting the nursing identity, considering the meaning of life, importance of family, necessity of social interest, compassion, worth of visiting care, the limits of visiting nursing care, identified characteristics of clients, both sides of the role model. Conclusion: Through visiting care practice, nursing students experienced stress, nursing identity, both sides of role model, and the worth and limits of visiting care, students felt the necessity of systems for lower classes and considering general characteristics of the clients. Above all, they came to have a wider perspective of the society through the practice.
Park, Tae-Gyu;Sim, Sang-Hun;Yun, Gi-Bong;Jang, Chang-Hui
Transactions of the Korean Society of Mechanical Engineers A
/
v.26
no.1
/
pp.171-178
/
2002
An effect is made in this study to deepen understanding of small punch(SP) creep testing which has been a round for about 10 years as a substitute for the conventional uniaxial creep testing. Even though considerable numbers of SP creep test program have been performed, most of the tests were aimed at measuring creep rupture lives only. Very flew studies showed interest on the meaning of what we were really measuring during the SP creep tests. In this paper meanings of the parameters measured during the SP creep testing, such as punch load and punch displacement rate are investigated using finite element analysis. It was shown that the measured parameters must represent the stress and strain rates of the material at the annular region located at about 0.65 mm from the center of the SP specimen. The material in this location would go through constant maximum stress and strain rate during the testing. Experimental verification is also discussed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.