• 한국환경과학회지
• /
• 제14권3호
• /
• pp.345-350
• /
• 2005

Three-week old Commelina communis was transferred and grown in Hoagland solution containing $100{\mu}M\;Cd^{2+},\;100{\mu}M\;Cd^{2+}+100{\mu}M\;kinetin,\;100{\mu}M\;Cd^{2+}+100{\mu}M\;zeatin\;and\;100{\mu}M\;Cd^{2+},\;200{\mu}M$ zeatin for 7 days, and then a number of physiological activities were investigated. In control, the length of the stem of plants was increased to 4.7cm, but in $Cd^{2+},\;Cd^{2+}+kinetin,\; Cd^{2+}+100{\mu}M\;zeatin\;and\;Cd^{2+}+200{\mu}M$ zeatin treatments, the growth of plants were increased to 1.5cm, 2.1cm, 3.9cm and 4.3 em, respectively. In the treatments of $Cd^{2+},\;Cd^{2+}+kinetin,\;Cd^{2+}+100{\mu}M\;zeatin\;and\; Cd^{2+}+200{\mu}M$ zeatin, total chlorophyll contents were reduced to $26\%,\;24\%,\;15\%\;and\;3\%$, respectively, on the contrast to the control. In chlorophyll fluorescence experiments, Fv/Fm ratios were also reduced to $44\%,\;21\%,\;17\%\;and\;5\%$ in the light intensity of $2100{\mu}Mmole\;E\;m^{-2}s^{-1}\;by\;Cd^{2+},\;Cd^{2+}+kinetin,\;Cd^{2+}+$100{\mu}M\;zeatin\;and\;Cd^{2+}+200{\mu}M$ zeatin treatments on the contrast to the control. Water stresses were increased to 2.6, 1.7 and 1.2 times by $Cd^{2+},\; Cd^{2+}+kinetin\;and\;Cd^{2+}+{\mu}M$ zeatin. On the other hand, combination of $Cd^{2+}+200{\mu}M$ zeatin reduced water stress to $0.12\%$. In $Cd^{2+}$ accumulation experiments $Cd^{2+}$transports were inhibited to $33\%\; 48\%\;and\;70\%\;by\;Cd^{2+}+kinetin,\;Cd^{2+}+100{\mu}M\;zeatin\;and\;Cd^{2+}+200{\mu}M$ zeatin. Therefore, it could be concluded that zeatin clearly reduced the toxicities of $Cd^{2+}$ by reducing the absorption of $Cd^{2+}$.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.230-240
• /
• 1997

본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 알아보기 위해 Monofilament 섬유와 Fibrillated 섬유의 두 종류 폴리프로필렌 섬유를 선택하여 10$\times$10$\times$50 cm 보 시편을 만들었는데, 이때 사용된 두 종류의 섬유 길이는 19 mm이고, 섬유 혼입량은 0%, 1%, 2%, 3%로 하였으며, 초기균열 깊이의 영향을 알아보기 위해 초기 균열길이를 각 섬유 혼입량에 따라 1.5cm, 3.0cm, 4.5cm로 하여 실험을 수행하였다. 또한, 본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 규명하기 위해 보 시편에 대한 4 점 하중 휨시험을 통해 하중-하중점 변위 곡선을 각 시편에 대해 측정하였고, 이때 COD 게이지를 이용하여 하중-CMOD 곡선도 측정할 수 있었다. 이러한 실험결과를 통해, 섬유혼입량과 초기 균열 깊이에 따른 압축강도, 휨강도 및 휨인성, 응력확대계수, 파괴에너지 등이 규명되었다. 이러한 결과에 대한 분석으로부터 Fibrillated 폴리프로필렌 섬유가 Monofilament 섬유보다 연성 효과가 큰 것을 알 수 있었으며, 특히 하중-CMOD 곡선으로부터 계산되는 파괴에너지인 Jc가 믿을만한 파괴특성 인자임을 알 수 있었다.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.73-82
• /
• 2020

With the coal mining depth increasing, both stress and gas pressure rapidly enhance, causing coal and gas outburst risk to become more complex and severe. The conventional method for prediction of coal and gas outburst adopts one prediction index and corresponding critical value to forecast and cannot reflect all the factors impacting coal and gas outburst, thus it is characteristic of false and missing forecasts and poor accuracy. For the reason, based on analyses of both the prediction indicators and the factors impacting coal and gas outburst at the test site, this work carefully selected 6 prediction indicators such as the index of gas desorption from drill cuttings Δh₂, the amount of drill cuttings S, gas content W, the gas initial diffusion velocity index ΔP, the intensity of electromagnetic radiation E and its number of pulse N, constructed the Bayes discriminant analysis (BDA) index system, studied the BDA-based multi-index comprehensive model for forecast of coal and gas outburst risk, and used the established discriminant model to conduct coal and gas outburst prediction. Results showed that the BDA - based multi-index comprehensive model for prediction of coal and gas outburst has an 100% of prediction accuracy, without wrong and omitted predictions, can also accurately forecast the outburst risk even for the low indicators outburst. The prediction method set up by this study has a broad application prospect in the prediction of coal and gas outburst risk.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권7호
• /
• pp.1033-1039
• /
• 2006

The metabolic response of Labeo rohita to thermal acclimation was assessed. Advanced fingerlings of L. rohita (average weight $31{\pm}1.4g$) were acclimated to 31, 33 and $36^{\circ}C$ compared with ambient temperatures ($26^{\circ}C$) for 30 days and different enzymes associated with stress response were estimated. Glycolytic enzyme-Lactate dehydrogenase, (LDH, E.C.1.1.1.27), TCA cycle enzyme-Malate dehydrogenase (MDH, E.C.1.1.1.37), Protein metabolizing enzymes-Aspartate amino transferase (AST, E.C.2.6.1.1) and Alanine amino transferase (ALT, E.C.2.6.1.2) of liver, gill and muscle, Gluconeogenic enzymes-Fructose 1,6 Bi phosphatase (FBPase, E.C. 3.1.3.11) and Glucose 6 phosphatase (G6Pase, E.C. 3.1.3.9) of liver and kidney were significantly (p<0.05) different with increasing acclimation temperatures. Heat Shock Protein-70 (HSP-70) was expressed in increasing intensity at 31, 33 and $36^{\circ}C$ but was not expressed at $26^{\circ}C$. Results suggest that higher acclimation temperatures enhance metabolism and L. rohita maintains homeostasis between $26-36^{\circ}C$ via an acclimation episode. Such adaptation appears to be facilitated by resorting to gluconeogenic and glycogenolytic pathways for energy mobilization and induction of HSPs.

• Composites Research
• /
• 제31권4호
• /
• pp.145-150
• /
• 2018

항공우주산업에서 구조물의 수명연장과 경제적 측면에서의 효율적인 운용을 위해 다양한 구조건전성모니터링(Structural Health Monitoring, SHM) 기법들이 제시되어왔다. 금속재 구조물의 경우, 수분이나 염분 등에 의한 부식이나 쉽게 응력집중이 발생하는 타공, 노치, 볼트 등과 같은 위치에서의 균열이 주된 관심사였으나, 항공우주산업에서의 복합재 사용비율이 증가함에 따라 손상 메커니즘이 더욱 복잡한 복합재 구조물에 적용이 가능한 고도화된 SHM 시스템의 필요성이 강조되고 있다. 본 논문에서는 Q-switched 레이저와 다수의 압전센서를 이용한 복합재에서의 AE(Acoustic emission) 위치탐지 기법을 제시한다. 제시되는 기법은 10 mm 이내의 거리오차로 방출위치 탐지를 목표로 하며 복합재 구조에서 수행된 AE 모사실험 및 위치탐지 시도 결과를 제시하여 기법이 유효함을 증명한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.19-27
• /
• 2015

최근에 국제해사기구(IMO)에서 선박 평형수 처리장치(Ballast water treatment system, BWTS)와 관련된 국제 규정을 강화함에 따라 이에 대응할 수 있는 BWTS 기술개발의 중요성이 대두되고 있다. 지금까지는 세계 각국에서 선박 평형수 처리기술을 처리방식에 따라 크게 물리적 방식(막분리, 원심분리, 자외선 등)과 화학적 처리방식(염소처리, 오존처리, 화확약품 등)으로 개발하여 왔으나, 기존의 기술 방식들은 추가적인 구동전력, 낮은 생산성, 잔류처리 문제 등으로 기술적인 보완이나 대안이 요구되고 있다. 본 연구에서는 기존과는 다른 새로운 방식의 기계식 방식 평형수 처리장치의 설계를 위한 유동해석 연구이다. 고속 회전하는 몇 가지 디스크 형상에 따라 유동에서 발생하는 여러 가지 유동특성을 전산유체해석(CFD)를 통하여 분석하였다. 평판형 및 계단형 형상에서는 반경을 따라서 국부적으로 공동현상이 발생가능하며, 원주형에서는 전단응력 강도를 높일 수 있었다.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1109-1116
• /
• 2013

본 연구의 목적은 마찰교반용접된 7075-T651 알루미늄 합금 용접부에 대한 피로균열전파율의 공간적 불규칙성을 고찰하기 위한 것이다. 본 연구에서는 이전의 피로균열전파 실험 데이터를 활용하였다. 피로균열전파율의 공간적 불규칙성을 명확히 이해하기 위하여, 피로균열전파 실험은 일정 응력확대 계수범위 제어하에서 수행되었다. 재질, 즉 마찰교반용접된 7075-T651 알루미늄 합금 용접부의 용접재와 모재에 대하여 피로균열전파율의 공간적 불규칙성을 조사하기 위하여 실험 데이터가 해석되었다. 결론적으로 용접재의 변동성이 모재의 변동성보다 높게 나타났으며, Weibull 통계 해석에 의하여 변동성을 평가할 수 있음을 알았다.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.267-280
• /
• 1990

The purpose of this study was to investigate the force mechanism of Multiloop Edgewise Arch Wire and the intensity and distribution of stresses with vertical and intermaxillary elastics. The obtained results were as follows. 1. When plain wires were inserted and vertical and intermaxillary elastics were used in the upper and lower arch, the stresses of the anterior and posterior ends of wires were observed greatly but the stresses of the premolar were very small. 2. When MEAW were inserted in upper and lower arch, the upper 1st and 2nd premolar and the lower 1st premolar were extruded greatly. 3. In the area of the upper 1st molar and the lower 2nd premolar and the lower 1st molar, any stresses were not observed. 4. The vertical elastic counteracted the intrusion force of the MEAW in the anterior teeth but could not affect on posterior teeth. Using with the Class II elastics, the distal tipping force and extrusion force were exerted in the upper anterior teeth and the intrusion forces of the lower anterior teeth were relieved. Using with the Class III elastics, the extrusion force were exerted in the upper and lower anterior teeth, the distal tipping force were increased in the lower posterior teeth. 5. The Class II elastic counteracted the anterior intrusion force of the MEAW and extruded and tipped mesially the lower 2nd molar. The intrusion force of the MEAW also could not overcome the extrusion force of the class II elastics. 6. When the Class III elastics were engaged, the upper 2nd molar was extruded in spite of the intrusion forces of the MEAW and the extrusion forces of the lower anterior teeth and distal tipping forces in the posterior teeth were observed.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.317-326
• /
• 2003

The influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in Al/GFRP laminate such as the wing section was investigated. The main objective of this study was to evaluate the relationship between crack profile and delamination behavior. And a propose parameter on the delamination growth rate(d $A_{D}$/da) of Al/GFRP laminates with a saw-cut using relationship between delamination area( $A_{D}$) and cycles(N), crack length(a), stress intensity factor range($\Delta$K). Also, the fiber bridging effect factor( $F_{BE}$ ) was propose that the fiber bridging modification factor($\beta$$_{fb}$ ) to evaluate using the delamination growth rate(d $A_{D}$/da). The shape and size of the delamination zone formed along the fatigue crack between aluminum alloy sheet. Class fiber-adhesive layer were measured by an ultrasonic C-scan image. The shape of delamination zone turns out to be semi-elliptic with the contour decreased non-linearly toward the crack tip. It represents that relationship between crack length and delamination growth rate(d $A_{D}$/da) were interdependent by reciprocal action, therefore it's applicable present a model for the delamination growth rate(dA/sib D//da) in Al/GFRP laminates.minates.s.

• Tribology and Lubricants
• /
• 제32권4호
• /
• pp.113-118
• /
• 2016

As an economic, high quality, and highly reliable gear with low noise and low vibration is demanded, an overall finite element analysis regarding a gear is required. Also, an infrared thermography test, which is a quantitative testing technique, is demanded for safety and longer lifespan of gear products. In order to manufacture a gear product or to determine safety of a gear being used, it is necessary to precisely determine ingredients of a material constituting a gear and detect any internal defect. This study aims to realize a design that minimizes the spur gear displacement with respect to power during its rotation and ensures the spur gear control capacity by using a 3D model and the midasNFX program. This facilitates the assessment of the possibility of cracking by evaluating the stress intensity and focusing on the integrity of the spur gear. We prepare the specimen of the spur gear based on the possibility of cranking as per the result of the structural interpretation from an infrared ray thermal measuring technique. After cooling the spur gear, we perform experiments using thermography and halogen lamps and analyze the temperature data according to the results of the experiment. In the experiment which we use thermography after cooling, we find a rise in the temperature of the room. As a result, the defective part show temperatures lower than their surroundings while the normal parts have temperatures higher than the defective parts. Therefore, it possible to precisely identify defective part owing to its low temperature.