• 제목/요약/키워드: Stress increment

검색결과 316건 처리시간 0.029초

연속 강 플레이트거더교에서 내부지점보강과 외부프리스트레싱의 적용에 관한 해석적 연구 (An Analytical Study on Application of Section Increment at Internal Support with External Prestressing Method to Continuous Steel Plate Girder Bridge)

  • 심재중;홍성남;박선규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권2호
    • /
    • pp.128-136
    • /
    • 2010
  • 본 연구에서는 해석의 결과 내부 지점부 보강과 외부프리스트레싱의 도입이 일반 플레이트거더교의 단면보다 단면감소의 효과가 있음을 확인하였으며 특히 외부프리스트레싱의 도입으로 얻은 솟음은 교량의 처짐을 감소시켜 사용성 측면에서 긍정적인 효과를 나타냄을 확인하였다. 해석결과를 바탕으로 하여 거더 개수 별 적용가능 단면을 도시하였으며, 거더 개수가 4개일 경우에 한하여 회귀분석을 시행해 회귀식을 제시함으로써 추후에 이와 같은 단면을 사용할 때 응력예측을 가능할 수 있게 하였다.

미량합금 원소가 첨가된 아공석강의 인장 및 충격 특성 비교 (Comparison of Tensile and Impact Properties of Hypo-Eutectoid Steels Containing Micro-Alloying Elements)

  • 이승용;조윤;황병철
    • 열처리공학회지
    • /
    • 제30권1호
    • /
    • pp.6-12
    • /
    • 2017
  • In this study tensile and impact properties of three hypo-eutectoid steels containing different micro-alloying elements were investigated in terms of microstructural factors such as pro-eutectoid ferrite grain size, pearlite fraction, interlamellar spacing, and cementite thickness. Yield point phenomenon appeared in all the steel specimens during tensile testing, and ultimate tensile stress was mainly dependent on pearlite fraction. On the other hand, the refinement of austenite grain size caused by the addition of micro-alloying elements resulted in the increment of ferrite volume fraction and carbon contents in pearlite because of the refinement of pro-eutectoid ferrite grain size. As a result, cementite thickness in pearlite increased and had an effect on deteriorating the low temperature impact toughness.

Modeling flow instability of an Algerian sand with the dilatancy rule in CASM

  • Ramos, Catarina;Fonseca, Antonio Viana da;Vaunat, Jean
    • Geomechanics and Engineering
    • /
    • 제9권6호
    • /
    • pp.729-742
    • /
    • 2015
  • The aim of the present work was the study of instability in a loose sand from Les Dunes beach in Ain Beninan, Algeria, where the Boumerdes earthquake occurred in 2003. This earthquake caused significant structural damages and claimed the lives of many people. Damages caused to infrastructures were strongly related to phenomena of liquefaction. The study was based on the results of two drained and six undrained triaxial tests over a local sand collected in a region where liquefaction occurred. All the tests hereby analyzed followed compression stress-paths in monotonic conditions and the specimens were isotropically consolidated, since the objective was to study the instability due to static loading as part of a more general project, which also included cyclic studies. The instability was modeled with the second-order work increment criterion. The definition of the instability line for Les Dunes sand and its relation with yield surfaces allowed the identification of the region of potential instability and helped in the evaluation of the susceptibility of soils to liquefy under undrained conditions and its modeling. The dilatancy rate was studied in the points where instability began. Some mixed tests were also simulated, starting with drained conditions and then changing to undrained conditions at different time steps.

Inverse analysis of erection process for prismatic tensegrity structures with redundant cables

  • Pei Zhang;Huiting Xiong;Jingjing Yang;Jiayan Liu
    • Steel and Composite Structures
    • /
    • 제49권2호
    • /
    • pp.125-141
    • /
    • 2023
  • Firstly, a new kind of prismatic tensegrity structures with redundant cables is defined, the topology, geometry and forming conditions of which are introduced further. The development of its mechanical properties including self-stress states and structural stiffness with the increment of the twist angle is also investigated carefully. Combined with the topology of this kind of structures, a reasonable erection scheme is proposed, in which some temporary lifting points need to be set and two groups of vertical cables are tensioned in batches. Then, a simplified dynamic relaxation method is employed to track the erection process inversely, which aims to predict each intermediate equilibrium state during the construction, and give the key structural parameters that can effectively guide the construction. The removal of the active cables, the relaxation or tension of the passive cables are simulated by controlling their axial stiffness, so that the structural composition as well as the serial numbers of the elements always keep invariant regardless of the withdrawal of the slack cables. The whole analysis process is clear in concept, simple to implement and easy to popularize. Finally, several examples are given to verify the practicability and effectiveness of the proposed method further.

수중운동 프로그램이 유방절제술 환자의 어깨관절 기능, 신체적 자각증상 및 삶의 질에 미치는 효과 (Effects of Aquatic Exercise Program on the Shoulder Joint Function, Physical Symptom and Quality of Life in Postmastectomy Patients)

  • 유양숙
    • 한국보건간호학회지
    • /
    • 제13권2호
    • /
    • pp.101-114
    • /
    • 1999
  • This study was designed to investigate the effects of an aquatic exercise program on the shoulder joint function. physical symptom. quality of life and stress among the patients who received modified radical mastectomy between 6 to 12 months prior to their visits. The subjects were 31 women aged between 40 and 60 who visited the out-patient department at Kang Nam St. Mary's Hospital for follow-up care. and were not under the treatment of intravenous cancer chemotherapy or radiation therapy. and had no complications. Twelve of them were assigned to the control group. while nineteen subjects to the experimental group. The aquatic exercise program was developed by the author with the assistance of exercise specialists. The program includes warming uP. aerobic and cooling down exercises in water. The aquatic exercise program for the experimental group was carried out 3 times a week with 60 minutes in each time for 8 weeks from September 20th to November 15th. 1995 in a regular swimming pool in Seoul. Changes in the range of motion of the shoulder joint. muscle strength. physical symptom. quality of life. and stress were examined after the completion of treatment. The data were collected through isokinetic muscle strength evaluation and questionnaire survey before and after the treatment. Paired and unpaired t-test were adopted to analyze the data. The results were as follows ; 1. The increment in the range of motion of the shoulder joint in the experimental group after the exercise was significantly greater than those in the control group. 2. The peak torque of shoulder girdle muscles increased significantly after the exercise in the experimental group only. 3. The physical symptom score decreased significantly after the exercise in the experimental group only. 4. The experimental group revealed significantly higher level of quality of life and lower level of stress after the exercise compared with those before the exercise. whereas the control group showed no significant changes in those levels. These findings may indicate that the aquatic exercise program is effective in increasing the range of motion of the shoulder joint and muscle strength and quality of life. and also effective in decreasing physical symptoms. and the level of stress in postmastectomy patients. Accordingly. the acquatic exercise program' can be adopted as an effective nursing intervention for postmastectomy rehabilitation.

  • PDF

Voronoi 입자기반 개별요소모델을 이용한 암석 균열의 열에 의한 미끄러짐 해석: 국제공동연구 DECOVALEX-2023 Task G(Benchmark simulation) (Voronoi Grain-Based Distinct Element Modeling of Thermally Induced Fracture Slip: DECOVALEX-2023 Task G (Benchmark Simulation))

  • 박정욱;박찬희;이창수
    • 터널과지하공간
    • /
    • 제31권6호
    • /
    • pp.593-609
    • /
    • 2021
  • 본 연구에서는 입자기반 개별요소모델(grain-based distinct element model, GBDEM)을 이용하여 결정질 암석 내 포함된 균열의 열-역학적 거동을 평가할 수 있는 수치해석기법을 제시하고 열에 의한 균열의 미끄러짐 거동을 해석하였다. 이는 DECOVALEX-2023 프로젝트 Task G의 일환으로 수행된 벤치마크 모델링 연구로, Task G는 결정질 암반 내 균열의 열-수리-역학적 복합거동을 해석하기 위한 수치해석기법을 개발하는 데에 목표가 있다. 여기에서는 Voronoi diagram을 이용하여 다면체 개별입자의 집합체로서 해석모델을 생성하고, 입자 및 입자간 접촉에서 발생하는 열-역학적 거동을 개별요소프로그램인 3DEC을 통해 해석하였다. 암석 시험편의 탄성거동을 재현하기 위하여 등가연속체 개념을 적용하여 입자와 접촉의 미시물성을 산정하였으며, 균열에 상응하는 접촉에는 Coulomb slip model을 부여하여 인장강도와 전단강도를 갖는 불연속면을 모사하였다. 경계응력과 열응력에 의한 균열의 거동을 수치적으로 모델링하였으며, 경계조건에 따라 균열의 미끄러짐이 발생하는 열-역학적 메커니즘을 정량적으로 분석하였다. 해석 결과, 본 연구에서 제시한 해석모델이 암석 내 열팽창과 열응력의 증가, 균열 응력과 변위, 경계조건의 영향 등을 합리적으로 재현하고 있음을 확인하였다. 본 연구의 해석모델은 Task G에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 실내실험에 적용하여 타당성을 검증할 예정이다.

개별요소법 기반의 삼차원 수치해석을 통한 절리성 암반의 강도특성 평가 (Assessment of Rock Mass Strength Using Three-Dimensional Numerical Analysis with the Distinct Element Method)

  • 배준봉;엄정기;정호영
    • 지질공학
    • /
    • 제33권4호
    • /
    • pp.573-586
    • /
    • 2023
  • 절리성 암반은 절리 또는 연약면에 의해 역학적인 이방성이 발현될 수 있으며 절리성 암반의 강도 및 변형 특성에 대한 이해는 지질공학 현장에서 주된 관심사이다. 본 연구는 마찰재료로 채택된 석고를 이용하여 단일절리를 포함하는 시료를 성형하고 진삼축시험을 통하여 진삼축 조건의 강도 및 변형 특성을 고찰하였다. 동일한 조건에서 수행한 개별요소법 기반의 삼차원 수치해석은 진삼축시험을 통하여 검증되었으며 타당성이 확보되었다. 수치해석 결과는 절리의 방향성과 더불어 현장의 주응력 조건이 절리성 암반의 강도 및 변형 특성 연구에 있어서 필수적인 요소임을 지시한다. 수치해석을 통하여 절리의 경사각 변화에 따라 산정한 횡등방성 암반의 강도는 중간주응력이 강화함에 따라 유의미한 증가를 나타내며, 증가의 폭은 절리의 경사 조건에 큰 영향을 받는다. 또한, 절리의 경사방향과 두 수평 주응력 방향 간의 상대적인 관계는 횡등방성 암반의 강도특성을 좌우하는 요인이다. 두 개의 절리군을 포함하는 암반의 강도는 경사가 더욱 급한 절리군이 전체 암반의 강도를 좌우한다. 두 절리군 중 한 절리군의 연속성이 짧아 암교 효과를 발휘하면 연속성이 상대적으로 긴 절리군의 방향성이 전체 암반의 강도를 좌우할 수 있다. 절리성 암반에 대한 기존의 삼차원 파괴기준식은 적용성 측면에서 한계도 있지만, 수치해석이 이를 보완하는 데 유용하게 활용될 수 있다.

매실과 홍삼 부산물이 스트레스에 대한 육계 생체 반응에 미치는 영향 (Effect of Feeding Plum and Red Ginseng Marc on Vital Reaction in Broiler Stress)

  • 봉미희;지상윤;박준철;문홍길;이상철;이준헌;홍준기
    • 한국가금학회지
    • /
    • 제38권3호
    • /
    • pp.213-223
    • /
    • 2011
  • 본 연구는 매실박과 홍삼박을 사료에 첨가하여 육계 체내 생리활성 효과를 구명하고자 실시하였으며, 이를 위해 고온 스트레스 자극과 LPS 염증 반응을 유도하여 스트레스에 대한 반응을 조사하였다. 이를 위해 고온 스트레스 자극에 따른 생산성 및 혈액생화학 변화를 조사하였으며, LPS로 염증 반응이 유도된 육계에서 immunoglobulin 농도 및 비장 조직내 cytokine mRNA 발현을 조사하였다. 공시계로는 1일령 Ross종 육계수컷 192수를 선별하여 고온 환경(96수)과 일반 환경(96수)으로 구분하였다. 고온 환경은 불쾌지수 86($33^{\circ}C$, 75%)의 고온 스트레스를 자극하여 5주간의 사양 시험을 실시하였으며, 일반 환경은 5주간의 사양 시험 종료 후 LPS를 주입하였다. 환경에 따라 각각 처리당 24수(3수${\times}$8반복)씩 4처리구에 총 96수를 임의 배치하여 실시하였다. 시험구 배치는 무첨가구(negative control; C), 시판 면역 증강제 첨가구(positive control: PC, 25 ppm ${\beta}$-glucan), 매실 부산물 1% 첨가구(PM: plum marc), 홍삼 부산물 3%(RGM: red gingeng marc)로 배치하였다. 고온 스트레스에 대한 혈액생화학 조성에서 매실박 첨가구는 Mg 농도를 높게 유지하여 Ca/Mg 비율을 무첨가구보다 낮게 유지하였으며, 홍삼박 첨가구는 Mg 농도가 무첨가구와 같았지만, Ca 농도를 높여 Ca/Mg 비율을 무첨가구보다 낮게 유지하였다(P<0.05). 따라서 매실박과 홍삼박 첨가구는 고온 환경에서 무첨가구보다 C a/Mg 비율을 낮게 유지하여, Ca/Mg 비율과 정의 상관관계에 있는 cholesterol 수준을 낮추는데 긍정적으로 작용할 것이라 사료된다. LPS 접종 후 IgM 농도는 매실박 첨가구가 무첨가구에 비해 유의적으로 낮은 수준을 나타내었으며(P<0.05), 홍삼박 첨가구는 무첨가구에 비해 낮은 경향을 나타냈지만 유의적인 차이는 없었다. 또한 비장 조직 내 cytokine mRNA 발현에서 홍삼박 첨가구의 경우 공통적으로 IL-1, IL-2 및 IL-6의 mRNA 발현 비율이 무첨가구에 비해 유의적으로 낮았으며, 매실박 첨가구도 IL-1, IL-2에서 무첨가구와 베타글루칸 첨가구보다 낮게 나타났다(P<0.05). 따라서 육계에서 매실박은 LPS 감염 시 IL-1, IL-2 같은 친염증 사이토카인의 발현을 감소시킴으로 염증 반응을 줄여 IgM 상승을 억제하는 것으로 사료된다. 홍삼박 첨가구의 경우 친염증성 사이토카인 억제 효과가 높았지만 항체 농도는 무첨가구와 같은 수준으로 상승하였는데, 생산성, 면역 반응을 개선할 수 있는 첨가 수준에 대한 추가적인 연구가 필요할 것으로 사료된다. 또한 이 실험에서 양성 대조군으로 활용한 ${\beta}$-glucan 전체적으로 긍정적인 효과를 보이지 않았는데, 양성 대조군 활용 시 첨가 수준에 대한 세밀한 검토가 필요할 것으로 사료된다. 결론적으로 매실박과 홍삼박은 고온 스트레스와 외부 병원성 물질 자극에 대한 반응을 최소화하는데 긍적적으로 작용하는 것으로 사료된다.

체인 보강재의 현장 인발저항력 평가 (An Evaluation of In-situ the Pullout Resistance of Chain Reinforcement)

  • 김상수;유찬;이봉직;신방웅
    • 한국지반공학회논문집
    • /
    • 제18권4호
    • /
    • pp.339-347
    • /
    • 2002
  • 보강토 옹벽에 체인을 보강재로 사용한 경우의 인발저항력 평가를 위한 현장실험을 실시하였다. 실험에서는 횡방향 부재로 강봉이나 L-형 강재앵글을 고려하였으며, 체인의 길이(20m, 2.5m 그리고 3.0m), 보강재의 조합(체인단독, 체인+강봉 그리고 체인+앵글) 그리고 설치위치 등을 다르게 하여 총 80개소에 대해서 인발실험을 실시하였다. 체인 또는 체인+강봉의 경우, 최대 변위는 평균 150mm였으며, 인발하중은 지속적으로 증가하다가 체인의 극한강도에 도달하면 파단(인장파괴)되는 것으로 나타났다. 그러나 체인에 L-형 앵글을 조합한 경우에는 최대변위가 평균 100mm정도로서 변위 억제에 큰 효과가 있는 것으로 나타났다. 현장에서 측정된 항복 인발하중값을 이론값과 비교했을 때는 보강 방법 또는 연직응력에 따라서 현장 측정값이 이론값 보다 약 1.2~3배정도 큰 것으로 나타났으며, 체인의 길이, 연직하중의 크기, 횡방향 부재의 조합에 따라서 항복 인발하중의 크기는 변화하는 것으로 나타났다. 그러나 강봉과 L-형 앵글사이에 차이는 현저하지 않았다. 체인을 보강재로 사용하는 경우 기존의 이론식을 적용한 설계나 시공은 안전측으로 나타났으나, 체인의 인발 저항력이 너무 과소 평가되어 있다고 판단되었다.