• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.621-629
• /
• 1992

본 연구에서는 Kelvin의 기본해와 초기응력 증분에 의해 정식화된 경계적분방 정식을 이용하여 점차적으로 외력을 증가시켰을 때, 선형등방경화재에 국부적으로 생 기는 항복영역과 항복하중, 탄소성 응력해석등을 재료비선형문제로 해석하였다. 이 때 초기응력 증분을 결정함에 있어서 종래에는 등가 소성변형률을 수렴판정으로 해석 하였지만, 이는 구분적인 선형 경화재와 온도 의존성 문제에는 적당하지 않으므로 암 기용일등은 등가응력과 응력-변형률 선도를 이용하여 수렴판정을 하였다. 그러나 이 방법은 소성역에서의 기울기가 변화하는 곳에서는 피할 수 없는 오차가 존재한다. 따라서 여기에서는 계산된 초기응력 증분에 의한 초기 탄성변형률에너지 증분과 응력 -변형률선도로 부터 구해지는 초기 탄성변형률에너지 증분을 이용한 수렴판정으로 초 기응력증분을 결정하였다. 또한, 내부영역적분을 일부 해석적인 적분과 수치적분을 병행한 경우와 전부 수치적분방법으로 내압을 받는 실린더와 단순 인장하중이 작용하 는 양편 Ⅴ형 노치를 갖는 박판의 경우에 적용하여 해석하였으며, 그 결과를 유한요소 법 프로그램인 NISA(numerically integrated elements for system analysis)로 구한 결과치와 비교, 고찰하였다.

• Korean Journal of Radiology
• /
• 제22권1호
• /
• pp.97-105
• /
• 2021

Objective: The present study aimed to investigate the association between myocardial blood flow (MBF) quantified by dynamic CT myocardial perfusion imaging (CT-MPI) and the increments in heart rate (HR) after stress in patients without obstructive coronary artery disease. Materials and Methods: We retrospectively included 204 subjects who underwent both dynamic CT-MPI and coronary CT angiography (CCTA). Patients with more than minimal coronary stenosis (diameter ≥ 25%), history of myocardial infarction/revascularization, cardiomyopathy, and microvascular dysfunction were excluded. Global MBF at stress was measured using hybrid deconvolution and maximum slope model. Furthermore, the HR increments after stress were recorded. Results: The median radiation dose of dynamic CT-MPI plus CCTA was 5.5 (4.5-6.8) mSv. The median global MBF of all subjects was 156.4 (139.8-180.4) mL/100 mL/min. In subjects with HR increment between 10 to 19 beats per minute (bpm), the global MBF was significantly lower than that of subjects with increment between 20 to 29 bpm (153.3 mL/100 mL/min vs. 171.3 mL/100 mL/min, p = 0.027). This difference became insignificant when the HR increment further increased to ≥ 30 bpm. Conclusion: The global MBF value was associated with the extent of increase in HR after stress. Significantly higher global MBF was seen in subjects with HR increment of ≥ 20 bpm.

• 농업과학연구
• /
• 제14권2호
• /
• pp.329-344
• /
• 1987

과압밀비(過壓密比)와 전단속도(剪斷速度) 및 다짐율(率)이 점성토(粘性土)의 응력변형특성(應力變形特性)에 미치는 영향(影響)을 검토(檢討)하기 위해서 반부극하(反復戟荷)에 의(依)한 삼축압축시험(三軸壓縮試驗)을 한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 반부재하(反復載荷)를 했을 때 같은 변형(變形)에서 축차응력의 차(差)는 큰 변형(變形)에서 반부재하(反復載荷)했을 때 더욱 크게 나타났고 공극수압(空隙水壓)은 제하시(除荷時)에는 감소(減少)하다가 다시 증가(增加)하며 재재하(再載荷)되면서 급격히 증가하는 현상(現象)을 나타냈다. 2. 과압밀비(過壓密比)가 클수록 변형(變形)의 증가(增加)에 따라 회복되는 탄성변형률은 감소(減少)하였으며 제일재하계수(除一載荷係數)는 과압밀비가 증가(增加)할수록 감소(減少)하였다. 3. 전단속도(剪斷速度)가 증가(增加)함에 따라 탄성변형율(彈性變形率)은 증가(增加)하였고 변형(變形)의 증가(增加)에 따라 탄성변형율(彈性變形率)은 감소(減少)하였다. 제일재하계수(除一載荷係數)는 변형(變形)이 증가(增加)함에 따라 감소(減少)하였고 전단속도(剪斷速度)가 빠른 경우에 큰 값을 나타냈다. 4. 회복되는 탄성변형율(彈性變形率)은 다짐율이 증가(增加)함에 따라 크게 나타났고 또 변형(變形)이 증가(增加)함에 따라 탄성변형율(彈性變形率)은 약간 감소(減少)하는 경향(傾向)을 나타냈다. 제일재하계수(除一載荷係數)는 다짐율(率)의 증가(增加)에 따라 뚜렷한 경향(傾向)은 보이지 않았으나 일반적(一般的)으로 변형(變形)이 증가(增加)함에 따라 감소(減少)하는 경향(傾向)을 나타냈다.

• 한국항만학회지
• /
• 제14권3호
• /
• pp.331-340
• /
• 2000

For the rational and economic design of the structural elements of ships which is built using welding, the ultimate strength analyses of the plates having initial imperfections, such as welding residual stresses and strains, are needful. The welding deformation usually relied on approximative equations or based on expert's experience. But in this paper, for the thermal elasto-plastic analysis of plates, the finite element analysis was performed, based on initial strain method. In formulating the incremental analysis, unbalanced force terns were included. In the plastic domain during the incremental process, the 2nd order terns stress increment and yield stress increment were considered, so that time increment could be controlled for a more stable solution. The ultimate strength analysis program of the plates having initial imperfections was made. The ultimate strength analysis was carried out based on the results of the welding deformations of this paper. In the ultimate strength analysis the Rayleigh-Ritz method based on the minimum potential theory was used.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6846-6851
• /
• 2015

본 연구에서는 성토체의 확장에 의해 성토체 하부지반으로 전달되는 연직응력 증분량을 계산할 수 있는 식을 탄성론에 근거하여 유도하였다. 연직응력 증분량 산정식의 유도과정에서는 평면기점의 개념을 적용하여 유도과정을 단순화하였다. 연직응력 증분량 산정식에 의한 계산결과를 수치해석결과와 비교해 보았을 때 성토체 하부지반으로의 깊이가 커질수록 산정식과 수치해석결과 사이의 차이가 감소하였다. 수평방향 거리에 따른 연직응력 증분량을 수치해석결과와 산정식에 의한 결과를 통해 비교해 볼 때 대체적으로 산정식에 의해 예측된 연직응력 증분량이 수치해석에 의한 증분량보다 약간 커서 보수적인 결과를 보임을 알 수 있었다.

• 한국농공학회논문집
• /
• 제53권4호
• /
• pp.21-27
• /
• 2011

Soil stress distribution under loading is one of the important problems in civil engineering. Many models have been proposed to interpret the stress distribution in soil and most models assume that the soil is homogeneous and isotropic. Therefore, the actual stress distribution may be different. In addition, With the increase of the top load, soil stress does not increase linearly. In this study, vertical stress changes in sandy soil according to top load increase were measured through experiments. Experimental results, vertical soil stress due to top load increase showed an initial nonlinear behavior and when the load increases to some extent, vertical soil stress showed a linear behavior. ${\alpha}$ value obtained by existing theories always 1.00. But, ${\alpha}$ value by experiment was observed from 0.91 to 1.22 and ${\alpha}$ value was increased with increasing distance from the loading plate.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.339-349
• /
• 2004

The method for fatigue life prediction of ball bearing is proposed applying the algorithm of contact fatigue prediction based on stress analysis. In order to do this, a series of simulation such as initial surface stress analysis, EHL analysis, subsurface stress analysis and fatigue analysis are conducted from the loading at each ball location calculated for a bearing subjected to external bearing load and contact shape function. And uniaxial fatigue tests are performed to obtain fatigue parameter of AISI 52100 steel. It was found that since stress is usually higher at the inner raceway contact than at the outer raceway contact, fatigue failure occurs on the inner raceway first. When the fatigue life calculated in the stress-based method are compared with $L_{50}$ life of L-P model, Crossland criterion for the radial load increment is similar to $L_{50}$ life and Dang Van criterion for the axial load increment is similar. In the case of EHL contact. there is no difference of fatigue life between dry contact and EHL contact, when maximum Hertz pressure exceeds 2.5GPa.

• 성인간호학회지
• /
• 제21권3호
• /
• pp.293-302
• /
• 2009

Purpose: This study is descriptive study that confirms the affect of the factors of perceived stress and social support of the kidney transplantation recipient affect on the quality of life. Mothods: 167 subjects who have received kidney transplantation in a university hospital in G city. Data obtained are analyzed by SPSS Win 13.0. Results: The perceived stress based on transplantation related characteristics and general traits of kidney transplantation has significant differences only in frequency of admission. The subjects who had been supported by acquittances have more significant social support index. The quality of life has significant differences in number of admissions, gender and occupation. Also, when the perceived stress of kidney transplantation recipients is lower and social support is higher, the quality of life is higher. The perceived stress has 28.1% increment of quality of life. Adding social support, both of them affect 34.8% increment of quality of life. Conclusion: To decrease the factor to cause the stress of kidney transplantation recipients, it is necessary to have social support networks and to develop plans and programs to increase the quality of life of recipients.

• 한국정밀공학회지
• /
• 제24권5호
• /
• pp.44-55
• /
• 2007

The method for fatigue life prediction of ball bearing is proposed applying the algorithm of contact fatigue prediction based on stress analysis. In order to do this, a series of simulation such as initial surface stress analysis, EHL analysis, subsurface stress analysis and fatigue analysis are conducted from the loading at each ball location calculated for a bearing subjected to external bearing load and contact shape function. And uniaxial fatigue tests are performed to obtain fatigue parameter of AISI 52100 steel. It was found that since stress is usually higher at the inner raceway contact than at the outer raceway contact, fatigue failure occurs on the inner raceway first. When the fatigue life calculated in the stress-based method are compared with L50 life of L-P model, Crossland criterion for the radial load increment is similar to L50 life and Dang Van criterion for the axial load increment is similar. In the case of EHL contact, there is no difference of fatigue life between dry contact and EHL contact, when maximum Hertz pressure exceeds 2.5GPa.

• Archives of Pharmacal Research
• /
• 제21권3호
• /
• pp.236-240
• /
• 1998

The effect of thyroid hormones on the hepatic xanthine oxidase activity was studied in rats after the intraperitoneal injections of comthyroid (triiodotyronine:thyroxine=1:4) at 0.3 mg/kg for 3 consecutive days. The aim of this study was to understand the precise mechanism of hyperthyroidism induced by oxidative stress. The concentration of lipid peroxides determined indirectly by the measurement of thiobarbituric acid reactants was increased in comthyroid treated rats. The hepatic glutathione content was decreased in comthyroid injected rat compared to the euthyroid state. It was also observed that the increment of xanthine oxidase activity has a profound role in oxygen radicals generation system in comthyroid treated rat. These findings suggest that the enhanced xanthine oxidase activity and depleting glutathione content in comthyroid treated rats result in pathophysiological oxidative stress including an increment of hepatic lipid peroxidation.