References
- loannides, E., Harris, T. A. and Ragen, M., 'Endurance of Aircraft Gas Turbine Main Shaft Ball Bearings-Analysis Using Improved Fatigue Life Theory: Part l-Application to a Long-Life Bearing,' Journal of Tribology, Vol. 112, No. 3, pp. 304-308, 1990 https://doi.org/10.1115/1.2920257
- Tallian, T., 'On competing failure modes in rolling contact,' ASLE Trans., Vol. 4, No. 10, pp. 418-439, 1967
- Harris, T. A., 'Rolling Bearing Analysis, 3rd Edition,' Wiley, New York, 1991
- Tallian, T. E., 'Simplified Contact Fatigue Life Prediction Model: Part I. Review of Published Models,' Journal of Tribology, Vol. 114, No. 10, pp. 207-213, 1992 https://doi.org/10.1115/1.2920875
- Skurka, J., 'Elastohydrodynamic Lubrication of Roller Bearings,' ASME paper 69-LUBS-18, 1969
- ISO, 'Explanatory Note on ISO 281/1-1977,' Technical Report 8646, 1985
- International Standards Organization, 'Rolling Bearings-Dynamic Load Ratings and Rating Life-Part I: Calculation Method,' International Standard 281/1-1977(E)
- ANSI/AFBMA, 'Load Ratings and Fatigue Life of Ball Bearings,' American National Standard 9, 1978
- Ioannides, E. and Harris, T. A., 'A New Fatigue Life Model for Rolling Bearings,' Journal of Tribology, Vol. 107, No. 3, pp. 367-378, 1985 https://doi.org/10.1115/1.3261081
- Yoon, K. C., 'Design methods of application-based exclusive ball bearings using genetic algorithms,' Hanyang Univ., dissertation, 2000
- Harris, T. A. and Barnsby, R. M., 'Life Ratings for Ball and Roller Bearings,' Proc. Instn. Mech. Engr., Vol. 215, No. 6, pp. 577-595, 2001 https://doi.org/10.1243/1350650011543817
- Love, A. E. H., 'Stress Produced in a Semi-Infinite Solid by Pressure on Part of the Boundary,' Phil. Trans. Royal Society, Vol. A228, pp.377-420, 1929 https://doi.org/10.1098/rsta.1929.0009
- Cho, Y. J., Kim, T. W. and Lee, M. J., 'The Stress Field in a Body Caused by the Tangential Force of a Rectangular Patch on a Semi-infinite Solid,' KSTLE International Journal, Vol. 2, No. 1, pp. 29-34, 2001
- Lee, R. T. and Hamrock, B. J., 'Squeeze and Entraining Motion in Nonconformal Line Contacts. Part II- Elastohydrodynamic Lubrication,' Journal of Tribology, Vol. 111, No. 1, pp. 8-16, 1989 https://doi.org/10.1115/1.3261884
- Roelands, C. J. A., 'Correlational Aspects of the viscosity-temperature-pressure relationship of lubrication oils,' Druk, V. R. B., Groinen, Netherland, 1966
- Dowson, D. and Higginson, G. R., 'Elastohydrodynamic Lubrication,' Pergamon, Oxford, 1966
- Koo, Y. P., 'Non-steady 3-dimensional elastohydrodynamic lubrication analysis,' Pusan National Univ., dissertation, 2000
- Matake, T., 'An Explanation on Fatigue Limit under Combined Stress,' Bull. of JSME, Vol. 20, pp. 257-263, 1977 https://doi.org/10.1299/jsme1958.20.257
- Corssland, B., 'Effect of Large Hydrostatic Pressure on The Torsional Fatigue Strength of An Alloy Steel,' Pro. Int. Conf. on Fatigue of Metals, Institution of Mechanical Engineers, London, pp. 138-149, 1956
- DangVan, K., 'High-Cycle Fatigue From Theory to Applications,' Springer Wien, New York, pp. 2-51, 1999
- Hamrock, B. J., 'Fundamentals of Fluid Film Lubrication,' McGrawHill, Singapore, pp. 584, 1994
- Hearle, A. D. and Johnson, K. L., 'Cumulative Plastic 22. Flow in Rolling and Sliding Line Contact,' Journal of Applied Mechanics, Vol. 54, No. 1, pp. 1-7, 1987 https://doi.org/10.1115/1.3172958