• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.69-79
• /
• 1996

Dynamic stress intensity factors are derives when the crack is propagating with constant velocity under longitudinal shear stress in orthotropic disk plate. General stress fields of crack tip propagating with constant velocity and least square method are used to obtain the dynamic stress intensity factor. The dynamic stress intensity factors of GLV/GTV=1(=isotropic material or transversely isotropic material) which is obtained in out study nearly coincides with Chiang's results when mode Ⅲ stress is applied to boundary of isotropic disk. The D.S.I.F. of mode Ⅲ stress is greater when α(=angle of crack propagation direction with fiber direction) is 90° than that when α is 0°. In case of a/D(a:crack length, D:disk diameter)<0. 58, the faster crack propagation velocity, the less D.S.I.F. but when crack propagation velocity arrive on ghear stress wave velocity, the D.S.I.F. but when crack propagation velocity arrive on shear stress wave velocity, the D.S.I.F. unexpectedly increases and decreases to zero.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.313-330
• /
• 1993

The propagating crack problems under dynamic plane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems in orthortropic material, it is important to know the dynamic stress components and dynamic displacement components around the crack tip. Therefore the dynamic stress components of dynamic stress field and dynamic displacement components of dynamic displacement field in the crack tip of orthotropic material under the dynamic load and the steady state in crack propagation were derived. When the crack propagation speed approachs to zero, the dynamic stress component and dynamic displacement components derived in this study are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determinded by using the concept of crack closure closure energy with the dynamic stresses and represented according to physical properties of the orthotrophic material and crack speeds. The faster the crack velocity, the greater the stress value of stress components in crack tip. The stress value of the stress component of crack tip is greater when fiber direction coincides with the crack propagation than when fider direction is normal to the crack propagation.

• 한국직업건강간호학회지
• /
• 제13권2호
• /
• pp.89-103
• /
• 2004

One of the major health problems of working women is job stress according to many studies. However, existing job stress questionnaires are suitable for men and men's job environments only, and do not reflect emotional labor for sales people. The aim of this research is to find women's job stress factors. The subjects of this investigation are married working women in sales since they experience emotional labor in addition to physical and psychological labor and the work-family conflict is very important job stressor for them. The job stressor of married sales women was analyzed through qualitative research. After I had in-depth interviews with 20 married sales women, I identified 49 new concepts, 3 main categories and 17 sub categories. The results are like the following. 1. 3 main categories are job factor, aggravate factor, and compensate factor. 2. Job factor has 5 sub-categories including 'increasing of selling', 'emotional labor' and 'physical burden'. 3. Aggrabate factor has 6 sub-categories including 'work/family conflict', 'relationship with higher office' and 'relationship with a fellow worker' 4. Compensate factor has 6 sub-categories including 'opportunity of employment', 'discrimination', and 'prestige' Consequently this study newly found some major job stressors for married working women in sales department.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1273-1278
• /
• 2000

Bridge load rating calculations provide a basis for determining the safe load capacity of bridge. Load rating requires engineering judgement in determining a rating value that is applicable to maintaining the safe use of the bridge and arriving at posting and permit decisions. Load testing is an effective means in calculating the rating value of bridge. In Korea, load carrying capacity of bridge is modified by stress modification factor that is determined from comparisons of measured values and analysis results The stress modification factor may be corrupted by vehicle location error that is defined as the gap of test vehicle location between load testing and analysis. In this study, the effects of vehicle location error to structural response and stress modification factor are investigated, and a new method for evaluating stress modification factor is proposed. The random data analysis shows that the proposed method is less sensitive to vehicle location error than the present method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.632-639
• /
• 2014

Mechanical stress and the vacuum level are the two main factors dominating the quality factor of a resonator operated in the vacuum range 1 mTorr to 10 Torr. This means that if the quality factor of a resonator is very insensitive to the mechanical stress in the vacuum range, it is sensitive to mainly the ambient vacuum level. In this paper, a wafer-level packaged MEMS resonator with a highly vacuum-sensitive quality factor is presented. The proposed device is characterized by a package with out-of-plane symmetry and a suspending structure with only a single anchor. Out-of-plane symmetry helps prevent deformation of the packaged device due to thermal mismatch, and a single-clamped structure facilitates constraint-free displacement. As a result, the proposed device is very insensitive to mechanical stress and is sensitive to mainly the ambient vacuum level. The average quality factors of the devices packaged under pressures of 50, 100, and 200 mTorr were 4987, 3415, and 2127, respectively. The results demonstrated the high controllability of the quality factor by vacuum adjustment. The mechanical robustness of the quality factor was confirmed by comparing the quality factors before and after high-temperature storage. Furthermore, through more than 50 days of monitoring, the stability of the quality factor was also certified.

• 한국콘텐츠학회논문지
• /
• 제18권9호
• /
• pp.684-695
• /
• 2018

본 연구는 보건 복지전공 대학생 사회적 지지가 대학생활적응에 어떠한 영향을 미치는지를 알아보고, 사회적 지지와 대학생활적응 사이에 학업스트레스가 매개역할을 하는지를 검증하는데 목적이 있다. 본 연구를 위해 경상남도 G지역과 J지역 대학에서 보건 복지계열을 전공하는 대학생을 임의표본추출방식을 통해 연구 대상을 선정하였으며, 구조화된 설문지를 활용, 자기기입식 방식을 통해 자료를 수집하였으며, 최종 229명을 분석 대상으로 분석하였다. 그 분석 결과는 다음과 같다. 첫째, 대학생의 사회적지지 요인과 학업스트레스 요인이 대학생활적응에 통계적으로 유의미한 영향을 미치는 것으로 나타났다. 둘째, 학업스트레스가 사회적 지지 요인과 대학생활적응 간에 부분매개효과 있는 것으로 나타났다. 즉 학업스트레스는 보건 복지전공 대학생의 대학생활적응에 영향을 미치는 사회적 지지 요인에 대해 완충역할을 하고 있는 것으로 나타났으며, 대학생의 친구, 가족, 교수 등의 다양한 사회적 지지 체계의지지 수준을 향상시킴으로써 학업스트레스 정도를 낮추면 대학생의 대학생활적응 수준이 더욱 향상시킬 수 있는 결과이다.

• 대한예방한의학회지
• /
• 제8권1호
• /
• pp.19-32
• /
• 2004

This study was conducted to evaluated musculoskeletal subjective symptoms and the degree of stress of industrial workers to present fundamental materials of preventive oriental medicine for improving their health and quality of life. During the medical examination with oriental medicine method, presence of subjective symptoms of musculoskeletal pain, Psychosocial Well-being Index(PWI) and life style were checked by using questionnaire method in 474 industrial workers. The collected data were analyzed with crosstabs, ANOVA and T-test. The results were as follows; 1. In general differences according to musculoskeletal subjective symptoms, education level of high school graduation had significantly higher distribution than that of below middle school or above university graduation in the pain present group. 2. In the musculoskeletal subjective symptoms and the degree of stress, all of Factor1, Factor2. Factor3, Factor4. and PWI had higher score in pain present group than in pain free group and the difference was statistically significant. 3. According to degree of stress and general character of subjects, single and education level of high school graduation had high score in Factor2, Factor3 and PWI. Factor1 and Factor3 was high in income group of low 1.49 million won. Factor2, Factor4, and PWI was high significantly in income group of 1.50 - 2.99 million won. In job type, manufacturing worker group had significantly high score in Factor3. 4. In degree of stress and life style difference, there was significant difference in PWI score in the field of alcohol chinking, smoking, exercise, obesity except sleeping hours. In the present study. as a result, it is found out that musculoskeletal subjective symptoms present group had higher score in psychosocial stress across the fields than symptom-free group and it is recommended that continuous studies on the relationship of job-related musculoskeletal disorders and psychosocial stress should be performed for improvement and prevention of mental and physical health of industrial worke

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.381-388
• /
• 2003

The material deficiencies in the form of pre-existing defects can initiated cracks and fractures. The stress distribution and fatigue crack initiation life of engineering materials may be associated with the size, the shape and the relative location of defects contained in the component. The objective of this study is to investigate the effect of arbitrarily located hole defect around the rivet hole of a wing section in monolithic aluminum and Al/GFRP laminates under cyclic bending moment during a service load. The stress distribution and the fatigue crack initiation behavior near a rivet hole of on the relationships between stress concentration factor ($K_t$) and relative position of defects were considered. The test results indicated the features of different stress field. Therefore, the stress concentration factor ($K_t$) and the fatigue crack initiation behavior was illustrated different behavior according to each position of hole defect around the rivet hole in monolithic aluminum and Al/GFRP laminates.

• 보건교육건강증진학회지
• /
• 제18권3호
• /
• pp.117-131
• /
• 2001

This study was attempted to develope a highly reliable and valid tool which is useful to assess the Korean obese adolescents' stress and coping method. The data were collected from the total of 600 obese students from middle and high schools in Pusan. The author used a convenience sampling method. The data collection was done from March 2 to July 11, 1999. The analysis of the data was done with SPSS Win(10.0) for descriptive statistics and factor analysis. The preliminary tool was composed of 72 items(stress items: 34, coping method items: 38) with the five point Likert scale. Item analysis and inter consistency were calculated for reliability and validity through pre-test. The preliminary tool was analyzed for reliability and validity. Finally, the tool was of 65 items(stress items: 33, coping method items: 32). The results were as follows: 1. Cronbach Coefficient Alpha for the 33 items of stress was .9485 and the 32 items of coping method was .8534. 2. The factor analysis was done in order to confirm construction and the items were extracted Oblimin rotation and Maximum likelihood extraction method. 3. The factor analysis showed 6 factors in stress and 10 factors in coping method. These 6 factors of stress explained 62.4％ and 10 factors of coping method explained 57.4％. 4. Six factor of stress lable were 〈outward appearance〉, 〈boyfriend/ girlfriend〉, 〈occur an outbreak of disease〉, 〈mutual relation of family〉, 〈an obese figure〉, 〈be a burden on exercise〉. 5. Ten factor of coping method lable were 〈be concerned about another affairs〉, 〈recreation activities〉, 〈self-violence〉, 〈relaxation〉, 〈hobby activities〉, 〈avoid a situation〉, 〈communication〉, 〈music〉, 〈negative behavior〉, 〈positive thinking〉. The results of using this scale in a study will contribute to design an appropriate school health management of obese students, and also it will contribute to the development of nursing research.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.104-111
• /
• 2005

With increasing use of SUH35/SUH3 dissimilar materials for automotive engine valves, it is required that stress singularities under residual stress on an interface for friction welded dissimilar materials analyzed to establish strength evaluation. The stress singularity $index{\lambda}$ and stress singularities $factor{\Gamma}$ were calculated from using the results of stress analysis to consider residual stress and loads. The stress singularities on variations for shapes and thickness of welded flashes were analyzed and discussed. This paper suggested that the strength evaluation by using the stress singularity factors as fracture parameters, considering the stress singularity on an interface edge of friction welded dissimilar materials will be useful.