• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.518-524
• /
• 2014

The substrate doping concentration dependence of strain-enhanced electron mobility in (110)/<110> nMOSFETs is investigated by using a self-consistent Schr$\ddot{o}$dinger-Poisson solver. The electron mobility model includes Coulomb, phonon, and surface roughness scattering. The calculated results show that, in contrast to (100)/<110> case, the longitudinal tensile strain-induced electron mobility enhancement on the (110)/<110> can be increased at high substrate doping concentration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1757-1760
• /
• 2005

This paper is concerned with spring back after sheet forming of bulk amorphous alloys in the super cooled liquid state. The temperature-dependence and strain-rate dependence of Newtonian/non-Newtonian viscosities as well as the stress overshoot/undershoot behavior of amorphous alloys are reflected in the thermo-mechanical Finite Element simulations. Hemispherical deep drawing operations are simulated for various forming conditions such as punch velocity, die corner radius, friction, blank holder force, clearance and initial forming temperature. Here, spring back by an instantaneous elastic unloading was followed by thermal deformation during cooling and two modes of spring backs are examined in detail. It could be concluded that the superior sheet formability of an amorphous alloy can be obtained by taking the proper forming conditions for loading/unloading.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.356-362
• /
• 2007

Magnetostrictive materials have been used for linear actuators due to its large strain, large force output with moderate frequency band in the presence of magnetic field. However their performance analysis is difficult because of nonlinear material behaviors in terms of coupled strain-magnetic field dependence, nonlinear permeability, pre-stress dependence and hysteresis. This paper presents a finite element analysis technique for magnetostrictive linear actuator. To deal with coupled problems and nonlinear behaviors, a simple finite element approach is proposed, which is based on separate magnetic field calculation and displacement simulation. The finite element formulation and an in-house program development are illustrated, and a simulation model is made for a magnetostrictive linear actuator. The fabrication and performance test of the linear actuator are explained, and the performance comparison with simulation result is shown. Since this approach is simple, it can be applied for analyzing magnetostrictive underwater projectors and ultrasonic transducers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1108-1111
• /
• 2007

OLED driving voltage shift can reduce the OLED display lifetime, especially for digitally driven AMOLED. By operating OLED at high frequency, we were able to suppress OLED voltage shift degradation, expecting improved AMOLED lifetime. We describe frequency dependence of voltage shift obtained from bias stress test of OLED.

• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.751-755
• /
• 2005

This paper is concerned with spring back after sheet forming of bulk amorphous alloys in the super cooled liquid state. The temperature-dependence and strain-rate dependence of Newtonian/non-Newtonian viscosities as well as the stress overshoot/undershoot behavior of amorphous alloys are reflected in the thermo-mechanical Finite Element simulations. Hemispherical deep drawing operations are simulated for various forming conditions such as punch velocity, die comer radius, friction, blank holder force, clearance and initial funning temperature. Here, spring back by an instantaneous elastic unloading was followed by thermal deformation during cooling, and two modes of spring back are examined in detail. It could be concluded that the superior sheet formability of an amorphous alloy can be obtained by taking the proper forming conditions for loading/unloading.

• 대한화학회지
• /
• 제43권3호
• /
• pp.251-256
• /
• 1999

여러 온도와 압력에서 톨루엔의 점성도를 공낙하법에 의하여 결정하고 톨루엔의 점성도에 대한 온도 및 압력 의존성을 연구하였다. 톨루엔의 점성 흐름에 관한 엇갈림 변형력으로부터 엇갈림 자유 에너지, 엇갈림 엔트로피, 엇갈림 엔탈피 등을 정의하여 압력 변화에 따르는 열역학적 성질의 변화를 고찰하였다. 실험적으로 결정된 엇갈림 자유 에너지, 엇갈림 엔트로피, 엇갈림 엔탈피 등을 온도 상승에 의한 톨루엔 분자들의 열운동 효과와 압력 증가에 의한 밀도 증가 및 분자의 입체 효과에 의하여 설명하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.187-188
• /
• 2002

Rubber has large differences in elastic characteristics from the other solid materials such as metals. Firstly, the rubber exhibits considerably large elastic compliance. Second is highly non-linear elasticity in which the compliance decreases with increase in strain. The main objective in this research is to reveal the dependence of rubber friction upon these elastic characteristics of the rubber in detail. A super elastic FEM analysis is carried out with using an elastic property of practical rubber. From the calculated result, it is cleared that the rubber makes large real contacting area easier than the metals.

• 에너지공학
• /
• 제14권2호
• /
• pp.153-158
• /
• 2005

본 연구에서는 폴리에틸렌 배관 전기융착부 단기성능 평가를 위한 비파괴검사를 실시할 경우 발견되는 결함에 대한 판정기준을 개발하였다. 인위적으로 $3.8mm\~25mm$ 내에서 6가지 크기의 결함을 삽입한 시험 편을 설계 및 제작하여 기계적 평가를 실시하고 또 이론적 해석을 하였다. 안전계수 2를 적용하여 유효 응력을 산정할 경우 최대 허용 가능한 결함 크기는 11 mm(열선 폭의 $30\%$)이며 안전 계수를 4를 적용할 경우에 최대 허용 가능한 결함 크기는 3.8mm(열선 폭의 $10\%$)이다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.21-24
• /
• 2016

The mechanical properties of REBCO coated conductor (CC) wires under uniaxial tension are largely determined by the thick component layers in the architecture, namely, the substrate and the stabilizer or even the reinforcement layer. Depending on device applications of the CC tapes, it is necessary to reinforce thin metallic foils externally to one-side or both sides of the CC tapes. Due to the external reinforcement of brass foils, it was found that this could increase the reversible strain limit from the Cu-stabilized CC tapes. In this study, the effects of differently hardened brass foil laminate on the electromechanical property of CC tapes were investigated under uniaxial tension loading. The tensile strain dependence of the critical current ($I_c$) was measured at 77 K and self-field. Depending on whether the $I_c$ of CC tapes were measured during loading or after unloading, a reversible strain (or stress) limit could be determined, respectively. The both-sides of the Cu-stabilized CC tapes were laminated with brass foils with different hardness, namely 1/4H, 1H and EH. From the obtained results, it showed that the yield strength of the brass laminated CC tapes with EH brass foil laminate was comparable to the one of the Cu-stabilized CC tape due to its large yield strength even though its large volume fraction. It was found that the brass foil with different hardness was mainly sensitive on the stress dependence of $I_c$, but not on the strain sensitivity due to the residual strain induced in the laminated CC tapes during unloading.

• 정신신체의학
• /
• 제5권1호
• /
• pp.31-42
• /
• 1997

This study was aimed to investigate dysfunctional attitudes, stress coping strategies and depressive symptoms in psychiatric patients. The subjects of this study consisted of 210 patients(138 schizophrenic patients, 29 depression patients, 43 alcohol dependence patients) according to DSM-IV criteria. Futhermore, the instruments were K-BDI(Beck Depression Inventory-Korean version), DAS(Dysfunctional Attitude Scale) and multidimensional coping strategy scale. The results were the following. 1) There were statistically significant correlations between depressive symptoms and dysfunctional attitudes in psychiatric patients. 2) In terms of coping strategies, there were positive correlations between depressive symptoms and focus on and venting emotions, accommodation, active forgetting, self-criticism, positive comparison, fatalism, passive withdrawal. Whereas, there was significant negative correlation between depressive symptom and active coping. 3) In terms of coping strategies, there were significant correlations between dysfunctional attitudes and focus on and venting emotions, active forgetting, self-criticism, positive comparison, fatalism, passive withdrawal. 4) Depression groups reported significantly higher BDI scores than schizophrenia groups. 5) In depression groups, DAS scores were significantly higher than those in schizophrenia groups. 6) In terms of coping strategies according to diagnosis, there were significant differences in venting emotions, active forgetting and self-criticism. As for venting emotions, alcoholic groups were scored significantly higher than schizophrenic groups. As for active forgetting, depression groups were scored significantly higher than schizophrenic groups. In self-criticism, depression groups and alcohol dependence groups reported significantly higher scores than schizophrenic groups.