• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.4
• /
• pp.426-435
• /
• 2005

The lightness of components required in automobile and machinery industries is requiring high strength of components. Therefore this requirement is accomplished as the process of shot-peening method that the compressive residual stress is made on the metal surface as one of various improvement methods. Special research is, therefore, needed about compressive residual stress on the metal surface in the process of shot-peening method. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in environmental condition(temperature) and mechanical condition(shot velocity, stress ratio) was investigated with considering fracture mechanics. By using the methods mentioned above, the following conclusions have been drawn. (1) The fatigue crack growth rate(da/dN) of the shot-peened material was lower than that of the un-peened one. In high temperature range. fatigue crack growth rate decreased with increasing temperature range, while fatigue crack growth rate increased by decreasing temperature in low temperature. (2) Fatigue life shows more improvement in the shot-peened material than in the un-peened material. And compressive residual stress of surface on the shot-peen processed operate resistance force of fatigue crack propagation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.644-655
• /
• 2008

Conventional hyperbolic model does not satisfactorily predict the overall stress-strain behaviors of various geomaterials. Tatsuoka and Shibuya(1992) suggest the generalized hyperbolic equation(GHE) considering strain dependency and calculated performance is in good agreement with precise triaxial compression test results of stress-strain relations over wide range of strains before peak stress condition in some cases, but GHE model also does not satisfactorily predict stress-strain relations as strain goes on state of peak stress in most cases. For improve a weak point of the GHE, in this study, modified form of generalized hyperbolic equation (MGHE model) is proposed which can predict highly nonlinear stress-strain behavior for various geomaterials from small strain to peak stress condition.

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.1967-1974
• /
• 2005

The subsurface stress field caused by both normal loads and tangential loads has been evaluated using the rectangular patch solution. The effect of tangential loading on the subsurface stress field has been investigated in detail for both the cylinder-on-cylinder contact and a spur gear teeth contact. For the cylinder-on-cylinder contact, the subsurface stress fields are moved more to the direction of tangential loads and the positions where the maximum stress occur are getting closer to the surface with the increasing tangential loads. The subsurface stress fields of the gear teeth contact are expanded more widely to the direction of tangential loads with the increasing tangential loads. The friction coefficient of a gear teeth contact is low because they are operated in a lubricated condition, and therefore surface tractions in the EHL condition hardly affect on the subsurface stress field.

• Journal of the Korean Society of Food Culture
• /
• v.10 no.5
• /
• pp.405-417
• /
• 1995

This research was designed to see the relationship among nutrient intake, food intake frequency and psychosocial stress in ordinary life. The subjects were 190 males and 263 females of university students in urban areas. There were significant correlations between nutrient intake and stress value, and between food intake frequency and stress value. In male, the more they consumed energy, protein and carbohydrate, the higher they had stress in several categories. But in female the results were reversed. Their stress values were lower when they have consumed protein source food frequently. And in general, stress values of female were higher than those of male. From these results, we conclude that nutrient intake tends to be decresed with increase stress in less stressful condition, but to be increased in more stressful condition.

• Korean Journal of Mathematics
• /
• v.4 no.2
• /
• pp.179-193
• /
• 1996

This paper is concerned with the penalized stationary incompressible Navier-Stokes system with the inhomogeneous Dirichlet boundary condition on the part of the boundary. By taking a generalized velocity space on which the homogeneous essential boundary condition is imposed and corresponding trace space on the boundary, we pose the system to the weak form which the stress force is involved. We show the existence and convergence of the penalized system in the regular branch by extending the div-stability condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1159-1168
• /
• 2013

In pressurized water nuclear reactors (PWRs), the reactor pressure vessel (RPV) upper head contains penetration nozzles that use a control rod drive mechanism (CRDM). The penetration nozzle uses J-groove weld geometry. Recently, the occurrence of cracking in alloy 600 CRDM penetration nozzle has increased. This is attributable to primary water stress corrosion cracking (PWSCC). PWSCC is known to be susceptible to the welding residual stress and operational stress. Generally, the tensile residual stress is the main factor contributing to crack growth. Therefore, this study investigates the effect on weld residual stress through different analysis methods for normal operating conditions using finite element analysis. In addition, this study also considers the effect of repeated normal operating condition cycles on the weld residual stress. Based on the analysis result, this paper presents a normal operating condition analysis method.

• Korean Journal of Occupational Health Nursing
• /
• v.10 no.1
• /
• pp.41-54
• /
• 2001

This study was designed to assess the relationship between occupational stress and health status in a study group of 197 workers employed in four newspaper publishing companies, using a self-adminstrative questionnaire. The types of occupation of them were reporters(79), clerical workers(54), and engineers (64). The studies on workers' health have been focused mainly on the physical, chemical, and biological diseases in our country. Therefore, the study of mental health, especially of occupational stress, is to be carried out. I consider stress as a factor having an effect on the health status of the newspaper employees, who have been well known to have high stress due to time pressures. I expect that this research will be helpful not only for understanding of health status by occupation, but also for making clear the issues that have been raised continuously from the previous researches. The results of this study are as follows; 1. The mean values of stress by occupation were statistically significant; the reporters had the highest stress symptom scores, and the engineers had the lowest levels of stress. The mean values of stress symptoms were higher in the workers who had long working hours. 2. The health status by occupation showed significant differences in gastrointestinal systems and in depression. The clerical workers were healthier than the engineers in gastrointestinal systems, and the reporters were more depressed than the engineers in depression. 3. The health status by the general characteristics, there was a statistical significance as for a gender, marital status, and absenteeism in the gastrointestinal systems. The men, the married, and the workers who had not been absent were more healthy. Only absenteeism had an effect on the problems in optical-dermal systems and in oro-fecal systems. Gender, marital status, absenteeism, and working hours were related with health status : the men. the married, the workers who had not been absent, and the workers who had longer working hours were more healthy. In mental stability, gender had a significant effect : the men were more healthy than the women. In general condition, the men, the older, the married, and the workers who had not been absent were more healthy. 4. Stress level had an effect on the health status in the respiratory systems, optical-dermal systems, oro-fecal system, depression, mental stability, general condition, and health condition. The workers who perceived more stress had more problems in their health status. 5. In the results of the multiple regression analyses, age in the respiratory systems, absenteeism in the optical-dermal systems, occupation and absenteeism in the gastrointestinal systems and in the oro-fecal systems, gender in depression and in mental stability, gender, age, absenteeism, and working hours in the general condition, absenteeism in the health condition had an effect on the health status of the workers.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.261-268
• /
• 2004

For cam and roller-follower contacting surfaces, the effect of tangential loading on the subsurface stress field at an elaso-hydrodynamic lubrication condition has been studied numerically. As tangential load increases, the subsurface stress field extended more widely to the direction of the tangential load. The positions of the maximum shear stress and the maximum effective stress are getting closer to the surface with the increasing tangential load. The tangential load at the elasto-hydrodynamic lubrication condition is of little consequence to the subsurface stress field.

• Journal of Applied Reliability
• /
• v.13 no.2
• /
• pp.87-98
• /
• 2013

Accelerated degradation tests (ADTs) measuring failure-related degradation characteristic at the accelerated condition are widely used to assess the reliability of highly reliable products. Often, however, little degradation could be observed even in single-stress ADTs due to the high reliability of test unit, and as a result poor estimate of the reliability may be obtained. ADTs with multiple stress variables can be employed to overcome such difficulties. In this paper, optimal ADT plans with two stress variables are developed assuming that the degradation characteristic follows Weibull distribution by determining the stress levels, the proportion of test units allocated to each stress level such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.52 no.2
• /
• pp.19-24
• /
• 2015

A reliable assessment and analysis of the condition of high pressure and temperature steam pipelines requires defining stress state, which will take into consideration not just the impact of internal pressure and temperature but all applied loads. For that, usage of modeling and numerical methods for calculation and analysis of stress state is essential. The main aim of piping stress analysis is to check the design of piping layout, which will allow simple, efficient and economical piping supports and provide flexibility to the piping system for loads and stresses. The piping stress analysis is carried out using CAESER II software. By using this software we can evaluate stresses, stress ratios, flange condition, support loads, element forces and displacements at each node and points. In this paper, only the maximum and minimum displacement results are tabulated, which is also shown in detail by an example of main steam pipelines of UST Main Engine System [1].