• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.208-209
• /
• 2006

This study presents the thermal stress characteristics of TL porcelain insulators(healthy and ageing) by the accelerating thermal mechanical ageing test with forced temperature gradient. The test temperature gradient is $95^{\circ}C(-35{\sim}60^{\circ}C)$, it was focused to high temperature thermal stress as compared with IEC 60575 standard. There was no a discrimination in the case of healthy aluminous porcelain insulators, dissimilarly in crystoballite insulators according to this test method. It was indicated that the long tenn reliability by thermal stress was conformed reasonably through the conventional accelerating ageing test methods.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.2
• /
• pp.107-113
• /
• 2005

Pharmacologic stress testing for myocardial perfusion imaging is a widely used noninvasive method for the evaluation of known or suspected coronary artery disease. The use of exercise for cardiac stress has been practiced for over 60 years and clinicians are familial with its using. However, there are inevitabe situations in which exorcise stress is inappropriate. A large number of patients with cardiac problems are unable to exercise to their full potential due to comorbidity such as osteoarthritis, vascular disease and pulmonary disease and a standard exercise stress test for myocardial perfusion imaging is suboptimal means for assessment of coronary artery disease. This problem has led to the development of the pharmacologic stress test and to a great increase in its popularity. All of the currently used pharmacologic agents have well-documented diagnostic value. This review deals the physiological actions, clinical protocols, safety, nuclear imaging applications of currently available stress agents and future development of new vasodilating agents.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.112-121
• /
• 2017

Purpose: The most previous works on designing accelerated life tests (ALTs) are focused on the application of a single stress. Because of the difficulty to obtain the sufficient information in a reasonable duration using single stress only, there is needed in practice to use multiple-stress ALTs frequently. This paper presents new practical plans with two stresses for Weibull distribution. Methods: The four-level practical plans based on rectangle test region are proposed and compared with the corresponding three-level statistically optimal plans. Sensitivity analyses for assumed design parameters and life-stress relationship are conducted. Results: A procedure to choose practical ALT plans is illustrated with a numerical example and guidelines for planning two-stress ALTs are provided. Conclusion: The proposed two-stress ALT plans on practical constraints to assess a quantile of Weibull lifetime distribution at the use condition are efficient and robust.

• Journal of Oriental Neuropsychiatry
• /
• v.20 no.1
• /
• pp.165-176
• /
• 2009

Objectives : The purpose of this study was to assess the effects of mental stress stimulation and acupucnture applied at HT7 point on heart rate variability (HRV) in normal subjects. Methods : Thirty seven healthy volunteers participated in this study. The volunteers were randomly allocated into two groups. Both groups performed a mental arithmetic stress test and stroop color-word test for 10 minute. Then, acupuncture needles were inserted on HT7 for the study group and on non-acupucnture point for the control group. HRV was recorded three times at test time and before and after acupuncture stimulation. Results : After giving mental stress stimulation to both groups, LF and LF!HF ratio were increased and HF was decreased significantly. After giving acupuncture to study group, LF and LF/HF ratio were decreased and HF was increased, but it was not significant. After giving acupuncture to control group, LF and LF/HF ratio were increased and HF was decreased, but it was not significant. Conclusions : This results show that mental arithmetic stress test and stroop color-word test contribute to activation of the sympathetic nervous system Acupuncture at HT7 could be relatively useful to decrease sympathetic activity and balance autonomic nervous system for those who are under stress.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.1-10
• /
• 1998

Testing high reliability devices under nomal operating condition is difficult, because the devices are not likely to fail in the relatively short time available for tests. For most applications it is necessary to accelerate the causes of failure by increasing a stress above its nomal value. Previous accelerated life test(ALT) plans have shown how to find optimum allocation, lowest stress and sample size subject to minimizing the variance of mean life estimator. In these ALT plans, the highest acceptable test-stress was assumed to be specified in advance by the experimenter but there is no guidance for selecting it. This assumption is, however, inappropriate for many applications. Testing devices at too-high stress levels can invalidate the extrapolation model, or introduce failure mechanisms that are not anticipated under nomal operating conditions. In this paper, we propose new 4:2:1 compromise plans using Min-Max method to minimize this risk and present minimized test-stress levels(max, middle, min), and find sample allocation based on Min-Max 4:2:1 compromise plans. In result, we compare previous 4:2:1 compromise plans specified maximum test-stress with Min-Max 4:2:1 compromise plans minimized maximum test-stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1508-1516
• /
• 2003

In numerical analysis for hydroforming process, the stress calculation is effected by flow stress which is general obtained by stress-strain relationship from uni-axial tension test, so the result of the analysis, especially in tube hydroforming, has limitation of accuracy, tubes are made in roll-forming process and become work-hardened. Then roll forming process causes material properties between rolling direction and circumstantial direction of the tube to be different. So it is difficult to predict material behavior in the process condition of bi-axial stress state. In this study, the flow stress of the tube is determined by inverse engineering approach and bulge test that is widely used for formability test in the condition of bi-axial stress. And Hill's quadratic yield function and flow rule are used to consider the anisotropy of the tube in the roll forming process.

• The Korea Journal of Herbology
• /
• v.22 no.2
• /
• pp.127-135
• /
• 2007

Objective : Investigation of the anti-stress effects of Sihosogansan Methods : Passive avoidance test(PAT) was performed after applying immobilization stress in water to rats. Also, forced swimming test(FST) was performed to another rats and after FST, the degree of Tyrosine Hydroxylase(TH) expression was measured with immunohistochemical method in the regions of locus coeruleus(LC) and ventral tegmental area (VTA). Results : In the PAT after immobilization stress in water, response latency was significantly increased in the Sihosogansan(400mg/kg) group in comparison with the control group. In the FST, immobility was significantly decreased in the Sihosogansan groups (100mg/kg, 400mg/kg), comparing with the control group. Stress-induced TH increases were suppressed in the Sihosogansan groups (100mg/kg, 400mg/kg) at the LC and the VTA region respectively. Conclusion : Sihosogansan can improve memory ability of rats, reduce behavior of depression in rats, decrease TH-immunoreactive cells at the LC and VTA region in rat, and it may be concluded that Sihosogansan has significant effect in reducing stress.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.139-147
• /
• 2003

The purpose of this study was to investigate and analyze the fatigue test data of pavement concrete. The static strength tests were carried out to check the compressive strength, flexural strength, and split tension strength at 56 days in order to minimize strength variation effect during test. The specimens were fabricated at twelves sections at a construction site of highway. The stress level and stress ratio of fatigue test were determined from static test results. The results are as follow: The flexural strength at 28 days mostly satisfied the criterion for design, but the compressive strength at 28 days were slightly below the criterion even though it satisfied at 56 days. The fatigue limit was 2 million cycles if the specimen was not failed to that cycles. The S-N curves were developed from the fatigue test results at each stress levels and each stress ratio. Then, the fatigue life of pavement concrete at a given stress level and fatigue strength of pavement concrete could be derived from these curves. Analysis using method No.2 was more acceptable because resulting of comparison and analysis using method No.2 was presented 2 sections were presented $R^2$ < 0.7, and other 2 sections were presented 0.7 < $R^2$ < 0.8, and the others 8 sections were $R^2{\geq}0.8$.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.624-630
• /
• 2006

This paper studies a modeling to demonstrate predicted reliability of the train control system components by performing an accelerated stress test. There are two tests for demonstrating predicted reliability; test run at the whole system level, and accelerated life test and accelerated stress test at the component level. In this paper, we imposed accelerated stress on the system and studied the train control system modeling for the accelerated stress test, which demonstrates predicted reliability according to whether or not the equipment is operating. Reliability of train control system consisting of electronic components varies drastically according to temperature so we considered the Arrhenius equation and the activation energy of electronic components. We also used reliability modeling with weighted average and calculated time necessary to complete the accelerated stress test on train control system.

• The Korean Journal of Physiology and Pharmacology
• /
• v.18 no.3
• /
• pp.263-268
• /
• 2014

The etiology of most psychiatric disorders is still incompletely understood. However, growing evidence suggests that stress is a potent environmental risk factor for depression and anxiety. In rodents, various stress paradigms have been developed, but psychosocial stress paradigms have received more attention than non-social stress paradigms because psychosocial stress is more prevalent in humans. Interestingly, some recent studies suggest that chronic psychosocial stress and social isolation affects mainly anxiety-related behaviors in mice. However, it is unclear whether chronic non-social stress induces both depression- and anxiety-related phenotypes or induces one specific phenotype in mice. In the present study, we examined the behavioral consequences of three chronic non-social stress paradigms: chronic predictable (restraint) stress (CPS), chronic unpredictable stress (CUS), and repeated corticosterone-HBC complex injection (RCI). Each of the three paradigms induced mild to severe depression/despair-like behaviors in mice and resulted in increased immobility in a tail suspension test. However, anxiety-related phenotypes, thigmotaxis and explorative behaviors, were not changed by the three paradigms. These results suggest that depression- and anxiety-related phenotypes can be dissociated in mouse stress models and that social and non-social stressors might affect brain circuits and behaviors differently.