1 |
Choi, Y. Kim, H. Y., Cho, Y., Kim, B. M. and Choi, J. C., 1998, 'A Method of Determining Flow Stress and Friction Factor using an Inverse Analysis in Ring Compression Test,' Transactions of the KSME, A, Vol. 22, No.3, pp. 483-492
과학기술학회마을
|
2 |
Arora, J. S., 1989, 'Introduction to Optimum design,' Mc-Graw Hill
|
3 |
Ozel., T. and Allan, T., 2000, 'Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High-Speed Cutting,' International Journal of Machine Tools & Manufacture, Vol. 40, pp. 1275-1282
DOI
ScienceOn
|
4 |
Cheon, J. S., 2000, 'Inverse Analysis Approach to Flow Stress Evaluation by Small Punch Test,' Transactions of the KSME, A, Vol. 24, No.7, pp. 1753-1762
과학기술학회마을
|
5 |
Kusiak, J., Kawalla, R., Pietrzyk, M. and Pircher, H., 1996, 'Inverse Analysis Applied to the Evaluation of Material Parameters in the History Dependent Flow Stress Equation in Hot Forming of Metals,' Journal of Materials Processing Technology, Vol. 60, pp. 455-461
DOI
ScienceOn
|
6 |
Guo, Y. Q., Batoz, J. L., Naceur, H., Bouabdallah, S., Mercier, F. and Barlet, O., 2000, 'Recent Development on the Analysis and Optimum Design of Sheet Metal Forming Parts Using a Simplified Inverse Approach,' Computers and Structures, 78, pp. 133-148
DOI
ScienceOn
|
7 |
Chenot, J. L., Massoni, E. and Fourment, L., 1996, 'Inverse Problems in Finite Element Simulation of Metal Forming Precesses,' Engineering Computations, Vol. 13, No. 2/3/4, pp. 190-225
DOI
ScienceOn
|
8 |
Garvus, A., Massoni, E. and Chenot, J. L., 1996, 'An Inverse Analysis Using a Finite Element Model for Identification of Rheological Parameters,' Journal of Materials Processing Technology, Vol. 60, pp. 447-454
DOI
ScienceOn
|
9 |
Carleer, B., van der Kevie, G., de Winter, L. and van Veldhuizen, B., 2000, 'Analysis of the Effect of Material Properties on the Hydroforming Process of Tubes,' Journal of Materials Processing Technology, Vol. 104, pp. 158-166
DOI
ScienceOn
|
10 |
Pipan, J. and Kosel, F., 2002, 'Numerical Simulation of Rotational Symmetric Tube Bulging with Inside Pressure and Axial Compression,' International Journal of Mechanical Sciences, Vol. 44, pp. 645 - 664
DOI
ScienceOn
|
11 |
Asnafi, N., 1999, 'Analytic Modelling of Tube Hydroforming,' Thin-Walled Structures, Vol. 34, pp. 295 - 330
DOI
ScienceOn
|
12 |
Koc, M., Aue-u-lan, Y. and Altan, T., 2001, 'On the Characteristics of Tubular Materials for Hydro form ing Experimentation and Analysis,' International Journal of Machine Tools & Manufacture, Vol. 41, pp. 761-772
DOI
ScienceOn
|
13 |
Yang, D. Y., Kwon, H. J., Chung. H. J. and Noh. T. S., 1990, 'Rigid-Plastic Finite Element Analysis of Axi-symmetric Hydroforming with Controlled Pressure,' Transactions of the KSME
과학기술학회마을
|
14 |
PAM-STAMP, version2000, 'solver reference manual'
|
15 |
DEFRORM 2D, version 7.1, 'DEFORM 2D version 7.1 user's manual.'
|
16 |
Sokolowski, T., Gerke, K., AhmetogIu, M. and Altan, T., 2000, 'Evaluation of Tube Formability and Material Characteristics: Hydraulic Bulge Testing of Tubes,' Journal of Material Processing Technology, Vol. 98, pp. 34-40
DOI
ScienceOn
|