• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.234-238
• /
• 2015

When we use a Finite Elements Method (FEM) to solve a linear static analysis problem, number of elements need to be sufficiently small for convergence of the solution. If we analysis a part, whose curvature is varying heavily, we face to determine how small the elements size is, because the calculated stress is increased as the elements are smaller. In this case, we need to analysis with mesh insensitive method, stress linearization. We can get a solution that is not varying with the elements size if the size is smaller than a certain level. In this paper, we evaluate a pressure vessel having geometrical discontinuities using stress linearization. First, we analysis the vessel with global model, including all part of the vessel, using large shell elements. Second, we analysis the local part of the vessel, which is the small part occurring maximum stress, using small continuum elements. Last, we evaluate the safety of the pressure vessel according to the ASME Sec. VIII Div 2.

• 한국식품과학회지
• /
• 제24권3호
• /
• pp.226-231
• /
• 1992

식물조직의 응력완화 측정 중에 압축응력에 의하여 조직의 내부구조가 변화되는 것을 고려하여 응력완화 곡선을 직선화할 수 있는 일반화 된 실험적 모델 $[F_{(o)}t^n/(F_{(o)}-F_{(t)})=k_1+k_2t]$을 제안하였다. 여기서 $F_{(o)}$는 초기응력, $F_{(t)}$는 t시간 후의 잔여응력, $k_1$, $k_2$와 n은 상수이다. 이 모델은 오이, 감, 사과, 감자, 고구마, 당근 등의 신선한 과일 및 채소류의 응력완화 곡선의 직선화 모델로서 매우 잘 적용되었을 뿐만 아니라 염절임, 당장 및 열처리한 채소류 조직에도 잘 적용되었다. 이 모델로부터 구조거동지수로 정의한 n값은 생시료인 경우 $1.14{\sim}l.35$ 범위로 응력완화 동안에 조직변동이 큰 시료일수록 큰 값을 나타내었고 처리된 시료일 경우 1에 가까워졌다.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.417-424
• /
• 2011

핵연료집합체는 상단고정체, 하단고정체, 지지격자체, 제어관/계측관과 핵연료봉의 5 가지 주요 구성품으로 이루어져 있다. 여기서 상/하단고정체는 다른 구성품과 달리 ASME, Section III, Division 1 - Subsection NB 의 운전조건 A, B 에서의 stress intensity limits 를 만족하여야 한다. 이중냉각 핵연료집합체는 집합체당 출력을 증가시키기 위해서 기존의 가압경수로용 핵연료집합체에서 핵연료봉의 배열과 위치를 변화시켰는데 이로 인하여 핵연료봉 내/외부유로로 냉각수가 잘 흐를 수 있도록 상/하단고정체의 유로판의 형상을 수정하여야 한다. 본 논문에서는 설계하중조건에 대하여 수정된 상단고정체 유로판의 건전성평가를 위해 수행한 응력선형화과정을 자세히 설명하고 평가결과에 대하여 기술하였다.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.67-74
• /
• 1995

This paper proposes the step-stress type-I censoring model for analyzing the data of accelerated life test and reducing the time of accelerated life test. In order to obtain the data of accelerated life test, the step-stress accelerated life test was run with voltage stress to CMOS Hex Buffer. The Weibull distribution, the Inverse-power-law model and Maximum likelihood method were used. The iterative procedure using modified-quasi-linearization method is applied to solve the nonlinear equation. The proposed Weibull step-stress type-I censoring model exactly estimases the life time of units, while reducting the time of accelerated life test and the equipments of test.

• Steel and Composite Structures
• /
• 제14권6호
• /
• pp.605-620
• /
• 2013

This paper provides an innovative iteration technique for the large deflection problem of annular plate. After some manipulation, the problem is reduced to a couple of ODEs (ordinary differential equation). Among them, one is derived from the plane stress problem for plate, and other is derived from the bending of plate. Since the large deflection for plate is assumed in the problem, the relevant non-linear terms appear in the resulting ODEs. The pseudo-linearization procedure is suggested to solve the problem and the nonlinear ODEs can be solved in the way for the solution of linear ODE. To obtain the final solution, it is necessary to use the iteration. Several numerical examples are provided. In the study, the assumed value for non-dimensional loading is larger than those in the available references.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.421-428
• /
• 2004

Various type of welded joints of the ship structure have been examined numerically and experimentally under bending and tensional cyclic constant-amplitude loading. Cyclic loading on structures can produce failures not readily predicted by conventional static analysis. The aim of a benchmark study is achieved with a generalization of the reference stress concept. Also different methods and procedures exist for the computation of the welded structure hot-spot stress a welded joints. These are either based on the extrapolation of stresses at certain reference points on the plate surface (or edge) close to the weld toe-as known from experimental investigations- or on the linearization of stresses in the through-thickness direction. In the present paper, the different methods are reviewed and applied to four different details in order to compare the methods with each other and to illustrate the differences.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2188-2197
• /
• 2022

To ensure the safety margin of a reactor pressure vessel (RPV) under normal operating conditions, it is regulated through the pressure-temperature (P-T) limit curve. The stress intensity factor (SIF) obtained by the internal pressure and thermal load should be obtained through crack analysis of the nozzle corner crack in advance to generate the P-T limit curve for the nozzle. In the ASME code Section XI, Appendix G, the SIF via the internal pressure for the nozzle corner crack is expressed as a function of the cooling or heating rate, and the wall thickness, however, the SIF via the thermal load is presented as a polynomial format based on the stress linearization analysis results. Inevitably, the SIF can only be obtained through finite element (FE) analysis. In this paper, simple prediction equations of the SIF via the thermal load under, cool-down and heat-up conditions are presented. For the Korean standard nuclear power plant, three geometric variables were set and 72 cases of RPV models were made, and then the heat transfer analysis and thermal stress analysis were performed sequentially. Based on the FE results, simple engineering solutions predicting the value of thermal SIF under cool-down and heat-up conditions are suggested.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.17-18
• /
• 2005

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1541-1555
• /
• 2015

In this paper mechanical behavior of the functional gradient materials (FGM) micro-gripper under thermal load and DC voltage is numerically investigated taking into account the effect of intermolecular forces. In contrary to the similar previous works, which have been conducted for homogenous material, here, the FGM material has been implemented. It is assumed that the FGM micro-gripper is made of metal and ceramic and that material properties are changed continuously along the beam thickness according to a given function. The nonlinear governing equations of the static and dynamic deflection of microbeams have been derived using the coupled stress theory. The equations have been solved using the Galerkin based step-by-step linearization method (SSLM). The solution procedure has been evaluated against available data of literature showing good agreement. A parametric study has been conducted, focusing on the combined effects of important parameters included DC voltage, temperature variation, geometrical dimensions and ceramic volume concentration on the dynamic response and stability of the FGM micro-gripper.

• 전산구조공학
• /
• 제5권1호
• /
• pp.133-142
• /
• 1992

본 논문은 수식화의 특이성 때문에 구조 최적화 문제에 거의 사용되지 않고 있는 선형 goal programming을 대규모 비선형 구조 최적화에 응용하는 방법을 제시한다. 이 방법은 다기준 최적화의 도구로 사용되는데 그 까닭은 goal programming이 목적함수와 제한조건등을 정의하는데 있어서 발생하는 난점들을 제거해 주기 때문이다. 이 방법은 비선형 goal 최적화 문제들의 해를 얻기 위해서 유한요소해석, 선형 goal programming기법, 그리고 계속적인 선형화 기법을 이용한다. 즉, 대규모 비선형 구조 최적화 문제를 비선형 goal programming형태로 전환시키는 일반적인 수식화 방법을 제시하고, 얻어진 비선형 goal 최적화 문제를 풀기 위한 계속적인 선형화 방법에 대해서도 논의한다. 설계도구로서 이 방법의 유효성을 논증하기 위하여 10, 25 및 200트러스의 사례를 가지고 응력제한조건들의 최소무게 구조 최적화 문제에 대한 해를 모색하며 이를 다른 연구결과와 비교검토한다.