• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.2
• /
• pp.92-100
• /
• 2016

Reliability analysis of tripod support structure for offshore wind turbine was performed. Extreme distribution function of peak response due to wind and wave loads was estimated by applying peak over threshold(POT) method. Then, stress based limit state function was defined by using maximum stress of support structure which was obtained by multiplying beam stress and concentration factor. The reliability analysis result was compared when maximum stress was calculated from shell element. Reliability index was evaluated using first order reliability method(FORM).

• Geomechanics and Engineering
• /
• v.11 no.3
• /
• pp.325-343
• /
• 2016

A total stress-based bounding surface model is developed to predict the undrained behaviour of saturated soft clays under cyclic loads based on the anisotropic hardening modulus field and bounding-surface theories. A new hardening rule is developed based on a new interpolation function of the hardening modulus that has simple mathematic expression and fewer model parameters. The evolution of hardening modulus field is described in the deviatoric stress space. It is assumed that the stress reverse points are the mapping centre points and the mapping centre moves with the variation of loading and unloading paths to describe the cyclic stress-strain hysteresis curve. In addition, by introducing a model parameter that reflects the accumulation rate and level of shear strain to the interpolation function, the cyclic shakedown and failure behaviour of soil elements with different combinations of initial and cyclic stresses can be captured. The methods to determine the model parameters using cyclic triaxial compression tests are also studied. Finally, the cyclic triaxial extension and torsional shear tests are performed. By comparing the predictions with the test results, the model can be used to describe undrained cyclic stress-strain responses of elements with different stress states for the tested clays.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.3
• /
• pp.91-98
• /
• 2020

For form stability of membrane structures, membrane material is required to be in tension. Therefore, in planning and maintenance management, the engineer should consider enough about introduction of stress during construction and re-introduction of stress after completion. Clamping part is an important portion with the function for introducing tension into membrane materials, and the function to transmit stress to boundary structures, such as steel frames. Then, the purpose of this research is to clarify stress condition and stress transfer mechanism including clamping part of membrane structures, and to grasp the changing tendency of membrane structures with the passage of time. In this research, following previous one, we perform well-balanced evaluation by conducting tensile fractured tests of clamping part's specimens, and by measuring individually the amount of displacement of not only overall specimen's length but membrane material and clamping part. Thereby, we consider the influence the difference in the hardness of edge rope and the difference in the direction of thread affect modification and fracture load.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.269-278
• /
• 1999

When a variety of repeated loads are given, most steel structures failed in much lower level of loads than static failure loads. In addition, bridge always includes the internal defects or discontinuities. from these, fatigue cracks initiates and can lead to sudden failure. Thus, in this study, tensile specimens by the cover plate shapes were used as the test specimens. The fatigue test was performed by constant amplitude fatigue loading and beach mark. From the results of this study, each specimen's fatigue section was observed. in addition, stress intensity factor at crack tip was calculated by using the Green's function which applied to discontinuous section where causing stress concentration. Therefore, the fatigue life of structural detail was investigated by adopting the theories of fracture mechanics. each specimen's crack shape is a semi-elliptical surface crack or center crack sheet, stress gradient correction factor, Fg is the most subjective of all stress intensity correction factors and fatigue life should be predicted by previous proposed function and finite element analysis.

• Korean Journal of Child Studies
• /
• v.19 no.1
• /
• pp.27-42
• /
• 1998

The purpose of this study was to investigate causal relationships among parenting stress, social support, parenting efficacy, and mothers' parenting behaviors as a function of child's sex. The subjects were 419 boys and 414 girls in the 3rd grade of elementary schools in Inchon city, and their mothers. Conflict Tactics Scales (Straus, 1979), Parenting Stress Index (Abidin, 1990), and Parenting Sense of Competence (Gibaud-Wallston & Wandersman, 1978) were revised for use in this research. A modified version of the Social Support Scale (Pak, 1985) and Teamwork of Parenting Alliance Inventory (Abidin, 1988) were used. The data were analyzed with one way ANOVAS, Pearson's correlations, and covariance structural analysis by the LISREL 8.03 program. The results of this study were: (1) The more mothers felt parenting stress and the less they perceived social support and parenting efficacy. (2) The process leading to mothers' coercive parenting behaviors differed as a function of child's sex. For mothers of boys, parenting stress and social support had an indirect effect on coercive parenting behaviors through the mediation of parenting efficacy. For mothers of girls, however, parenting stress had a direct effect on coercive parenting behaviors.

• Structural Engineering and Mechanics
• /
• v.54 no.3
• /
• pp.393-417
• /
• 2015

In this paper an 8-node quadrilateral assumed stress hybrid Mindlin plate element with $39{\beta}$ is presented. The formulation is based on complementary energy principle. The proposed element is free of shear locking and is capable of passing all the patch tests, especially the non-zero constant shear enhanced patch test. To accomplish this purpose, special attention is devoted to selecting boundary displacement interpolation and stress approximation in domain. The arbitrary order Timoshenko beam function is successfully used to derive the boundary displacement interpolation. According to the equilibrium equations, an appropriate stress approximation is rationally derived. Particularly, in order to improve element's accuracy, the assumed stress field is derived by employing $39{\beta}$ rather than conventional $21{\beta}$. The resulting element can be adopted to analyze both moderately thick and thin plates, and the convergence for the very thin case can be ensured theoretically. Excellent element performance is demonstrated by a wide of experimental evaluations.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.9 no.2
• /
• pp.21-32
• /
• 1972

The problems of thermal stress and residual stress in resistance spot welding are studied from two standpoint namely, effect of temperature distributions and effect of the radius of free boundary. The radius of the region where the temperature distributions are occured is taken as a function of time after welding and as a finite size, 6 times of heated zone. The region of the radial stress distribution is treated as a function of time under Saint-Venant's principle and 6 or 12 times of originally heated zone. Thermal stresses and strains are obtained by analytic solution under constant mechanical properties and by the finite difference method for varing properties under temperature variation. From the computed results following conclusions are derived (1) For the engineering purpose, the region of temperature distribution and stress distribution can be treated as a finite region, $R=r_o=6r_e$ (2) If the maximum temperature of the aluminum alloy plate is less than $500^{\circ}F$, thermal stresses and strains can be obtained with constant mechanical properties. (3) The residual stresses and strains will be remained in welds and its vicinity.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.77-86
• /
• 2018

Stress is the main source of a human error or can potentially contribute to it. Recently, the rate of accidents which is associated with human factors among the total aircraft accidents is showing a tendency of gradual increase. In order to prevent the accidents related to human factors, stress mitigation of the mission personnel is highly required. In this study, a 'stress cognitive alteration' technique, which is one of the stress relief methods, is applied to the Air Force pilots to verify if the technique is effective in reducing stress. The 'stress cognitive alteration' technique is comprised of two parts: a positive function of stress and a process to positively alter the physical, psychological response to stress. As a result of the application, it is found that this technique has an effect of reducing stress of the pilots under a relatively high level of stress.

• Journal of Oriental Neuropsychiatry
• /
• v.13 no.1
• /
• pp.39-52
• /
• 2002

The present experiments were designed to study the influence of Baekgumhwan on immune function of ICR mice under stress condition. Baekgumhwan was orally administered to the mice for 15days. on the 11th day the mice subjected to electric footshock for 5days(2 session a day, 11 footshocks a 31 min-session). B/T cell populations in splenocytes were studied by FACS analysis and cytokines($IFN-{\gamma}$ rand IL-10) production of the mouse splenocytes treated with PHA were studied by sandwich ELISA assay on the 15th day. The results were as follows. 1. After electric footshock, mice became sluggish and crowded to one side of the cage. Increased B/T cell populations in splenocytes were observed. These results confirm that electric footshock caused stress inducing immunological and behavioral changes in ICR mice. 2. Baekgumhwan administration without stress increase B cell populations in splenocytes, but T cell populations and cytokines($IFN-{\gamma}$ and IL-10) production of the mouse splenocytes treated with PHA maintain as similar levels as in the normal group. 3. Baekgumhwan administration with stress significantly antagonized the effect of electric footshock on behavior, increased B cell populations in splenocytes, so maintain as similar levels as in the normal group. cytokines($IFN-{\gamma}$ rand IL-10) production of the mouse splenocytes treated with PHA maintain as similar levels as in the normal group and T cell populations in splenocytes were increased as stress control.

• Clinical and Experimental Reproductive Medicine
• /
• v.47 no.3
• /
• pp.168-179
• /
• 2020

Objective: This study investigated testicular oxidative stress status and physiomorphological function in Wistar rats fed with yaji and cadmium chloride (CdCl₂). Methods: Sixty male albino Wistar rats (12 per group) were randomly assigned to five groups: group I (control), group II (300 mg/kg.bw of yaji), group III (500 mg/kg.bw of yaji), group IV (2.5 mg/kg.bw of CdCl₂), and group V (2.5 mg/kg.bw of yaji+4 mg/kg.bw omega-3). Each group was evenly subdivided into two subgroups and treatment was administered for 14 days and 42 days, respectively. Semen quality (sperm count, progressive motility, normal morphology, and gonadosomatic index), hormones (testosterone, follicle-stimulating hormone, and luteinizing hormone), testicular oxidative stress markers (superoxide dismutase, catalase, glutathione peroxidase, and malonaldehyde) and testicular histomorphological features were examined. Results: Yaji caused significant (p< 0.05) dose- and duration-dependent reductions in semen quality, the gonadosomatic index, testosterone, follicle-stimulating hormone, and luteinizing hormone. Yaji also caused significant (p< 0.05) dose- and duration-dependent decreases in superoxide dismutase, catalase, and glutathione peroxidase activity, as well as increased testicular malonaldehyde levels. Yaji induced distortions in the testicular histological architecture. CdCl₂ damaged testicular function by significantly (p< 0.05) reducing semen quality, reproductive hormone levels, and oxidative stress markers in albino Wistar rats. CdCl₂ also altered the histology of the testis. Conclusion: This study shows that yaji sauce has similar anti-fertility effects to those of CdCl₂, as it adversely interferes with male reproduction by impairing oxidative stress markers and the function and morphological features of the testis.