• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.279-288
• /
• 1999

The creep of concrete structures caused by variable stresses is generally calculated by step-by-step method based on the superposition of creep function. Although most practical application is carried out by this linear assumption. significant deviations between predictions and experiments have been observed when unloading takes place, that is. stress is reduced. This shows that the superposition of creep function does not describe accurately the effect of sustained compressive preload. The main purpose of this study is to propose a creep analysis model which is expressed with both creep function and creep recovery function where increase or decrease of stress is repeated. In these two function method, the creep behavior is modelled by using linear creep law for loading and creep recovery law for unloading. To apply two function method to time analysis of concrete structures, the calculation method of creep strain increment under varying stress is proposed. The calculation results based on the present method correlates very well with test data, but the conventional superposition method exhibits large deviation from test results. This paper provides a more accurate method for the time dependent analysis of concrete structures subjected to varying stress, i.e. increasing or decreasing stress. The present method may be efficiently employed in the revision of future concrete codes.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.319-329
• /
• 2014

Purpose: The purpose of this study was to investigate the effect of adolescent's family function, impulsive behavior, stress on the bullying types. Method: Data were collected from 627 adolescents and analyzed using descriptive statistics, t-test, Pearson correlation coefficients and stepwise multiple regression with the SPSS 18.0. Results: The bullying types (injurer and victim) correlates with family function, impulsive behavior and stress. Stepwise multiple regression analysis showed emotional reactivity, non-planning impulsiveness, friends related stress, experience of drinking (yes), experience of parent depression problem (yes), explained 34.1% of the total variance in bully injurer. Stepwise multiple regression analysis showed communication, motor impulsiveness, friends related stress, gender (male), grade (junior high school), explained 30.9% of the total variance in bully victim. Conclusion: The results of this study are expected to be used as basic data in providing a better understanding of adolescents' bullying, in preventing bullying and in developing an intervention program.

• Journal of Sasang Constitutional Medicine
• /
• v.36 no.1
• /
• pp.13-30
• /
• 2024

Objectives This study aimed to analyze the influence of various sleep-related factors that affect sleep quality by each Sasang type. Methods A total of 400 subjects were included for this study, 108 males and 292 females. Sasang type was diagnosed using the SCAT. Then, the characteristics of each Sasang type were analyzed using HRV, DITI, and PSQI, PSS, and SDFI questionnaires. Logistic regression analysis was used to predict sleep-related factors that affect sleep disorders by Sasang types. Results This study shows that the pathophysiological characteristics for stress and digestive function of each Sasang type can differentiate sleep management through a logistic regression model including subscales of PSS and SDFI. Stress had no effect on the occurrence of sleep disturbance within only So-Eum, since the stress level is originally high in the So-Eum regardless of sleep quality. Rather, decreased appetite and poor eating habits had a significant impact on the decline in sleep quality. In addition, poor digestion and eating habits in So-Yang had a greater impact and poor digestion in Tae-Eum had a greater impact on the decline in sleep quality. Conclusion The stress and subscales of digestive function provide differentiated sleep management in So-Yang, Tae-Eum, and So-Eum types. The individualized sleep management for each Sasang type with statistically validated PSS and SDFI would be useful for sleep-related experts planning safe and effective person-centered health care as well as for Western clinicians who want to incorporate Sasang typology into their treatments as integrative medical technique in the future.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.130-137
• /
• 1990

Thermal shock stress intensity factor for an edge-cracked plate subjected to thermal shock is obtained from Bueckner's weight function method. It is shown that thermal shock stress intensity factor has maximum values with variation of time and crack length and that there is most dangerous crack length. By comparing thermal shock stress intensity factor with fracture toughness, the fracture time and critical temperature difference due to thermal shock are determined theoretically. Under constant thermal shock temperature difference, and increase of crack length is shown to increase fracture time. The theoretical fracture time is compared with experimental value measured by acoustic emission method with soda lime glass.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1375-1386
• /
• 2006

In life testing, the lifetimes of test units under the usual conditions are so long that life testing at usual conditions is impractical. Testing units are subjected to conditions of high stress to yield informations quickly. In this paper, the inferences of parameters on the three step-stress accelerated life testing are studied. The two-parameter exponential distribution with a failure rate function that a log-quadratic function of stress and the tempered failure rate model are considered. We obtain the maximum likelihood estimators of the model parameters and their confidence regions. A numerical example will be given to illustrate the proposed inferential procedures.

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.151-161
• /
• 1994

FCAW has wide application in ship fabrication, maintenance and field erection. It has many advantages over SMAW.SAW and GMAW process. In many applications, the FCAW provides highquality weld metal. This method can reduce weld defects especially porosity and spatter. But the fatigue characteristics of those deposited metal have been rarely investigated. The purpose of this study is to investigate the cyclic stress-strain behavior and fatigue tests by the constant strain control were carried out on the rounded smooth specimen with deposited metal using the metal type flux cored wire. As the results of this study for the deposited metal welded by the metal type flux cored wire, the hardening or softening characteristics under cyclic load were investigated and cyclic stress-strain curve, strain-fatigue life curve, stress-strain function and fatigue life relation which are useful to estimate the fatigue life under the stress concentration condition were obtained.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.337-342
• /
• 2002

A new apparatus called the EFA (Erosion Function Apparatus) has been built and tested to measure the erodibility of fine-grained soils. The EFA is a simple test to predict the erosion rate of fine-grained soils along with the corresponding velocity and shear stress. In addition, it is advantageous in predicting the scour rate for actual soil samples from bridge sites. The plot of erosion rate versus shear stress is the result of an EFA test. It Indicates the critical shear stress at which erosion starts and the rate of erosion beyond that shear stress. In order to measure the erodibilities of various soils, 14 Shelby Tube soil samples are collected from the actual bridge sites and tested using the EFA. The results of the EFA tests which are the relationships between erosion rates and shear stresses are presented in this paper and research continues to develop the correlation between the erosion function and the soil properties.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.35-35
• /
• 2019

Aster spathulifolius Maxim. is belongs to the Asteraceae family which is distributed only in Korea and Japan. It is recognize as a traditionally medicinal plants and economically valuable in ornamental field. However, among the Asteraceae family, the Aster genus, which is lacks in genomic resources and information of molecular function. Therefore, we used high throughput RNA-sequencing transcriptome data of the A. spathulifolius to know molecular level function. DeNovo assembly produced 98,660 unigene with N50 value 1126 bp. Unigenes was performed to analyses the functional annotation against NCBI database like plant database of nucleotide (Nt) and non-redundant protein (Nr), Pfam, Uniprot, KEGG and Transcriptional factor (TF). In addition, Distribution of SSR markers also analyzed for future perfectives. Further, Comparing with other two Asteraceae family species like, Karelinia caspica and Chrysanthemum morifolium to the A. spathulifolius shows the number of gene that regulated in internal and external stress respectively salt-tolerant and heat and drought stress to understand the molecular basis related to the different environments stress.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.63-69
• /
• 2003

In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime then the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a function of several variables, such as the modulus ratio, the fiber volume fraction, the fiber aspect ratio, is proposed. It is found that the modulus ratio($E_f$/$E_m$) is the essential variable among them. Thus, the stress concentration factor is expressed as a function of modulus ratio in the derivation. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.981-989
• /
• 1995

A new weight function approach to determine SIF(stress intensity factor) using single-layer potential has been presented. The crack surface displacement field was represented by one boundary integral term whose kernel was modified from Kelvin's fundamental solution. The proposed method enables the calculation of SIF using only one SIF solution without any modification for the crack geometries symmetric in two-dimensional plane such as a center crack in a plate with or without an internal hole, double edge cracks, circumferential crack or radial cracks in a pipe. The application procedure to those crack problems is very simple and straightforward with only one SIF solution. The necessary information in the analysis is two reference SIFs. The analysis results using present closed-form solution were in good agreement with those of the literature.