• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.21-27
• /
• 1999

In this study, stress intensity factors KI, KII, KIII are existing at the same time to a hollow cylindrical bar of three dimension inclination crack. In order to investigate by experimentally the effect of the inclination angle $\psi$ of crack, artificial inclination cracks in the circumferential direction are put in the surface of a hollow cylindrical bar made by the epoxy-resin. Experimentally, stress analysis methods of stress intensity factors were proposed. But, suitable method are the caustic method and the photoelastic stress freezing method. The mixed mode of KI, and KII, were determined by the photoelastic method of the classical approach method and the FORTRAN language program of the used smallest square method.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.3 s.40
• /
• pp.301-309
• /
• 1999

The purpose of this study is to develop a method to deduce existing stress of steel member in inelastic range. Based on the previous experimental study, modified factor method considering the local plastification due to stress concentration was proposed. Finite element analysis was performed to investigate the stress distribution around hole and the results of the finite element analysis were compared with those from the Hole Drilling Method in elastic-plastic range. As a result of applying a modified factor method, proposed method shows very good approximation of 2% error for exact value of stress in the plastic range.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.27-33
• /
• 1981

In the paper, it was attempted to verify how the strength around fillet area of shifted gear would be affected by variables such as number of teeth, shifted value, and diametral pitch. Thereafter, the Lewis' tooth factor of the shifted gear was computed in terms of previously mentioned variables in order to observe the characteristics of stress change related from tooth factor and tooth number with the parameter of shifted values and diametral pitches. From the results of quasi-theoretical values by Finite Element Method(F.E.M.)and experimental values through the photo-elastic tests, the followings were identified. The more the number of gear teeth increased, the more the profile of the tooth became close to that of rack, and accordingly the stresses in the fillet area decreased significantly in certain range. Furthermore, as the shifted value and pressure angle increase the stresses tend decrease. Moreover, the stresses analyzed by F.E.M. in the filled area became around 1.22 times larger than the stresses computed by Lewis' form factor, and this is supposed as on influence of the stress concentration in fillet area.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.85-99
• /
• 1998

This paper describes an experimental study to examine collapse causes of the lifting cable due to brittle failure of an fitting anchor under the lifting works. Also, in this study an collapse mechanism that was obtained from stress analysis was compared with an actual collapse procedure. Fractographical analysis as well as chemical component test, tension test and Charpy V-Notch impact test for the fractured steel members were carried out. And then, its results were compared with that of normal steel members. Circumferential surface flaws were developed at internal facets of the fitting anchor before tensile stress occurred. Hence, a higher stress than nominal stress was occurred at flaws by stress concentration at the crack tip. Also, stress intensity factor of members increased by crack size of the potential flaws. Because the stress intensity factor at the crack tip was greater than critical values(fracture toughness), brittle fracture occurred under the lifting works. It is judged that the main collapse of the lifting cable is due to brittle fracture of the fitting anchor.

• YAKHAK HOEJI
• /
• v.56 no.1
• /
• pp.14-19
• /
• 2012

Nonalcoholic steatohepatitis(NASH) is serious metabolic disease related to fatty acid. According to "two hit theory", fatty acid-induced oxidative stress is important factor to progress nonalcoholic steatohepatitis from steatosis. In this study, we evaluated stearic acid induced oxidative stress in human hepatocarcinoma SK-Hep-1 cell. Cell viability, reactive oxygen species (ROS) production, glutathione (GSH), malondialdehyde and expression of antioxidant enzymes were determined at various time-points and concentrations of stearic acid. At 0.2 mM, non-toxic concentration, of stearic acid, production of ROS was significantly increased at 24 hours and the level of GSH was significantly decreased. Expression of superoxide dismutase-1 and 2 was slightly increased in 0.2 mM stearic acid at 24 hours. These results represent that the non-toxic concentration of stearic acid resulted in oxidative stress, suggesting that stearic acid may play a critical role in development of steatohepatitis.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.8 no.3
• /
• pp.7-12
• /
• 2012

Steam generator tubes are critical boundary of the primary and secondary side in nuclear power plants. Eddy current testing is commonly used as the method of non-destructive testing for the safety and integrity of steam generator tubes in the nuclear power plants. Changes in the geometric shape act as a stress concentration factor likely to cause a defect during the steam generator operation. The mixed-signals with the geometric shape are distorted and attributes that are difficult to detect signals. An example is bending stress due to compression process at a U-bend occurring in the intrados region which has a small radius of curvature. The resulting change in the geometric shape may lead to a dent like occurrences. The dent can cause stress concentration and generates stress corrosion cracks. In this study, the steam generator tubes of nuclear power plant were selected to study for analysis of mixed-signal containing dent and stress corrosion cracks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1516-1523
• /
• 2015

This study investigates the stress concentration factor of a door opening of an offshore tubular steel tower. The tubular steel tower is subjected to eight (8) different load combinations which are deemed to be normal and abnormal operating cases for the ultimate limit state and serviceability limit state. Analytical method using parametric equations and numerical method of finite element are used to analyze the stress components as well as any translations or rotations where the flow of stress is interfered with. A finite element program, ABAQUS, is used for the numerical method analysis. Trends of the stress concentration in the localized area near the opening are studied, and points of interest are defined for comparison among three different cases of tubular steel tower: without door and without reinforcement; without door opening and with reinforcement; and with door opening and with reinforcement. Findings are tabulated and shown in illustrative charts, and conclusions are made.

• Journal of Nutrition and Health
• /
• v.43 no.5
• /
• pp.443-452
• /
• 2010

Elevated plasma concentration of total homocysteine (ptHcy) is known as an independent risk factor of cardiovascular disease (CVD) and oxidative stress is also commonly implicated in CVD. An association between ptHcy and oxidative stress has recently been suggested. The study objective is to examine the relationship between ptHcy and oxidative stress markers in 103 healthy college students (62 males and 41 females). Plasma levels of ptHcy, oxidative stress markers (conjugated diene, erythrocyte catalase, TRAP, lymphocyte DNA damage), antioxidant vitamins ($\alpha$-tocopherol, $\gamma$-tocopherol, carotenoids), and lipid parameters (total cholesterol, triglyceride, HDL cholesterol) were determined. The results show that the concentration of ptHcy was significantly higher in male subjects ($22.17\;{\pm}\;2.14\;{\mu}mole/L$) than in female subjects ($12.28\;{\pm}\;0.45\;{\mu}mole/L$). There was a negative association between ptHcy and plasma ${\beta}$-carotene in male subjects (p $lt; 0.05), but no correlation between ptHcy and other plasma antioxidant vitamin levels in either gender. However, there were the negative correlations between ptHcy and plasma ${\alpha}$-carotene or ${\beta}$-carotene, and a positive correlation between ptHcy and lymphocyte DNA damage. A significantly low level of ${\alpha}$-carotene or ${\beta}$-carotene was found in male subjects with elevated ptHcy (${\geq}\;15\;{\mu}mol/L$), as compared to those with lower plasma homocysteine. These study results confirmed the views on the association between plasma homocysteine and oxidative stress markers in humans and support the hypothesis that homocysteine promotes the oxidative environment by counteracting the antioxidant defense mechanism.

• Journal of Korean Academy of Nursing
• /
• v.29 no.2
• /
• pp.445-455
• /
• 1999

This study has been conducted on the nonequivalent control group pretest-posttest design in quasi experimental basis and newly born premature infants from intensive care unit of G Medical University Hospital in Inchon Metropolitan were selected in two groups of 21 infants each. The first group for experimental and the other for control. Data has been collected form October 30, 1997 to August 29, 1998. For the experimental group tactile and kinesthetic stimulation was applied 2 times a day for 10 days(10 : 00~11 : 00 hours in the morning and 17 : 00~18 : 00 in the afternoon). As a weight weighing instrument. electronic indicator scale(Cas Co. korea) was used. To determine urine cortisol concentration level in stress hormone, radio immune assay method was used. And high performance liquid chlomatography was used to determine urine norepinephrine, concentration level To determine behavior status, tools developed by Anderson et at(1990) and remodeled by Kim Hee-Sook(1996) were used. Collected data were analyzed with the SAS program using x$^2$-test, student t-test, repeated measures ANOVA and paired t -test. The result were as follow. 1. As for the daily weight gain. the experimental group showed first change in weight and this group also showed higher weight in the average weight than the control group. Statistically, however, there was no significant factor between the two group. 2. The cortisol concentration in urine showed decrease in the experimental group norepinephrine concentration in urine showed increase in both experimental and control groups. No statistical significance was shown between the two groups. 3. In the aspect of behavior status. the experimental group showed statistical significance by showing inactive in the state of alert and conversion to a positive state than the control group. In conclusion, the sensory stimulation in this study showed a positive aspect through there was no statistical significance in the weight gain and urine stress hormone concentration. In the behavior status, there was statistical significance in the frequency of staying inactive in the state of alert and conversion to a positive state.

• Smart Structures and Systems
• /
• v.19 no.2
• /
• pp.203-211
• /
• 2017

This paper provides a numerical solution for multiple confocal elliptic dissimilar cylinders. In the problem, the inner elliptic notch is under the traction free condition. The medium is composed of many confocal elliptic dissimilar cylinders. The transfer matrix method is used to study the continuity condition for the stress and displacement along the interfaces. Two cases, or the infinite matrix case and the finite matrix case, are studied in this paper. In the former case, the remote tension is applied in y- direction. In the latter case, the normal loading is applied along the exterior elliptic contour. For two cases, several numerical results are provided.