• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.295-300
• /
• 2003

In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime when the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a major function of modulus ratio is proposed. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of intefacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• 한국지반공학회지:지반
• /
• 제14권1호
• /
• pp.93-108
• /
• 1998

본 연구에서는 지하공동의 형상과 규모가 공동의 안정성에 미치는 영향을 이론적 해석법과 수치 해석법을 이용하여 평가하였다. 지하 공동의 안정성에 영향을 미치는 제반요소들 중에서 암질, 초기응력의 크기 및 방향 그리고 측압계수가 공동주위에 발생하는 변위, 응력집중 그리고 소성영역의 크기와 범위에 미치는 영향을 중심으로 안정성을 평가하였다. 이론적 해석법을 이용하여 공동 벽면의 형상변화에 따른 응력집중계수의 변화를 분석하였으며 공동 벽면에서의 응력집중계수는 벽면의 곡률반경에 반비례하여 나타났다. 수치 해석법을 이용한 매개변수연구를 통하여 공동의 형상과 크기 변화에 따라서 제반요소들이 나타내는 특징들을 비교 평가하였다. 위 제반요소들이 나타내는 특징들을 지하비축공동 형상으로 널리 사용되고 있는 마제형 공동에 적용하여 측압계수와 공동단면의 비가 공동주위에 발생하는 최대변위의 변화 및 소성영역의 발달 양상에 미치는 영향을 평가하였다. 본 연구를 통하여 현재 건설되고 있는 국내 지하저장공동의 공동단면의 비는 공동이 위치할 현장의 측압계수조건에 따라서 안정성의 커다란 문제 없이도 공동의 높이 증가에 의한 공동의 단면적 증가가 경제적으로 가능함을 알수 있었다.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.90-100
• /
• 1994

In this study the fatigue crack growth behavior was investigated for the surface cracks in aluminum alloy A5083-O plate and its weldment. Several kinds of specimens were tested at room temperature. The Eccentric specimens(E1.0, E2.5) subjected to combined stresses(tension+bending) were tested and the welded specimens with weld toes(TOE1, TOE2) were tested in order to verify the method to consider the stress concentration such as weld toe. It was ascertained that the surface crack growth property in the weld toe could be predicted by the corrected Pang's equation proposed in this study.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.53-66
• /
• 1971

The effect of reinforced circular hole in a flat plate under general biaxial loading conditions is considered. The reinforcement is achieved by attaching a circular ring of uniform rectangular cross section along the boundary of the hole. This investigation includes a theoretical solution and an experimental conformation. In the theoretical analysis, Gurney's method is used to obtain a solution for the stress distribution and the solution is expressed in a general form, so that it can be applicable to the case of general biaxial loading and general values of Poisson's ratios. In the experimental work a systematic series of photoelastic models, as shown in Fig.5 and Table 1, were analyzed on polariscope. The experimental results were in good agreement with the theoretical ones, as shown in Fig.8 and 9. The conclusions derived are as follows: 1) The theoretical results, given in Eq. $(1){\sim}(5)$, are sufficient in accuracy for the engineering design purpose. 2) The stress concentration factor decreases as the ratio n increases, but not significant beyond n=3. 3) The stress concentration factor increase as the ratio m increases, but not significant below m=0.7.

• 한국지반공학회논문집
• /
• 제15권3호
• /
• pp.3-16
• /
• 1999

본 연구에서 미관통과 관통 샌드컴팩션파일(SCP) 개량지반에 대하여 일차원 압밀거동을 조사하기 위하여 실내모형실험을 실시하였다. 모델점토지반에 간극수압계, 토압계, 다이얼게이지등을 설치하여 SCP 개량지반의 압밀침하량과 응력분담비등을 측정하였다. 실험 결과, 미관통 SCP 지반의 압밀침하량은 관통 SCP 지반의 압밀침하량 보다 더 크게, 응력분담비는 더 적게 나타났다. 또한 SCP 개량지반의 응력분담비는 압밀시간, 지반심도, 상대밀도, 치환율과 관통률에 따라 변화됨을 알 수 있었다.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.153-160
• /
• 2004

Open microcellular foams having small-sized cell and good mechanical properties are desirable for many practical applications. As an effort to reduce the cell size, the microcellular foams combining viscosity improvers into the conventional formulation of styrene and water system were prepared via high internal phase emulsion polymerization. Since the material properties of foam are closely related to the solution properties of emulsion state before polymerization, the flow behavior of emulsions was investigated using a controlled stress rheometer. The yield stress and the storage modulus increased as viscosity improver concentration and agitation speed increased, due to the reduced cell size reflecting both a competition between the continuous phase viscosity and the viscosity ratio and an increase of shear force. Appreciable tendency was found between the rheological data of emulsions and the cell sizes of polymerized foams. Cell size reduction with the concentration of viscosity improver could be explained by the relation between capillary number and viscosity ratio. A correlative study for the cell size reduction with agitation speed was also attempted and the result was in a good accordance with the hydrodynamic theory.

• 산업기술연구
• /
• 제22권B호
• /
• pp.211-218
• /
• 2002

The paper is to show the behavior of composit ground which is installed with sheet pile in soft soil improved by sand compaction pile. The results of load-settlement relationship, earth pressure, stress concentration characteristics, and final water content were obtained by centrifuge model test. Two cases of tests, installation of sheet pile on the corner and both side of the loading plate for the improved SCP ground which was designed twice of the footing width, were performed for the tests under the vertical and horizontal loading and both side of corner. Finite element program(CRISP) for sand compaction pile using elasto-plastic model and numerical analysis for soft soil using modified cam-clay constitutive equation were compared and analized with the results of model tests. The result of analysis show the increased bearing capacity of soil after, SCP and sheet pile was installed.

• 산업기술연구
• /
• 제31권B호
• /
• pp.81-90
• /
• 2011

Centrifuge modeling and numerical analysis on works of breakwater construction were performed to investigate the behavior of caisson type of breakwater and foundation treated with the method of DCM (Deep Cement Mixing) under the condition of wave action in field. In centrifuge modeling, construction sequence of breakwater caisson such as preparation of ground, treatment of DCM, installation of rubble mound, placement of breakwater caisson and lateral loading on the breakwater due to wave action were reconstructed. Lateral movement of model breakwater and ground reaction in the vertical direction were monitored during test. Stress concentration ratio between the untreated ground and the treated ground with DCM was evaluated from measurement of vertical stresses on each ground. Numerical analysis with the software of PLAXIS was carried to compare with Results of centrifuge model test. It was found that stability of model breakwater was maintained during stage of construction and the compared results about stress concentration ratio were in relatively good agreements.

• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.667-676
• /
• 2019

Minimizing the stress concentration around hypotrochoid hole in finite metallic plates under in-plane loading is an important consideration in engineering design. In the analysis of finite metallic plate, the effective factors on stress distribution around holes include curvature radius of the corner of the hole, hole orientation, plate's aspect ratio, and hole size. This paper aims to investigate the impact of these factors on stress analysis of finite metallic plate with central hypotrochoid hole. To obtain the lowest value of stress around a hypotrochoid hole, a swarm intelligence optimization method named ant lion optimizer is used. In this study, with the hypothesis of plane stress circumstances, analytical solution of Muskhelishvili's complex variable method and conformal mapping is employed. The plate is taken into account to be finite, isotropic and linearly elastic. By applying suitable boundary conditions and least square boundary collocation technique, undefined coefficients of stress function are found. The results revealed that by choosing the above-mentioned factor correctly, the lowest value of stress would be obtained around the hole allowing to an increment in load-bearing capacity of the structure.

• 한국지반신소재학회논문집
• /
• 제11권2호
• /
• pp.11-20
• /
• 2012

미관통 SCP공법은 개량 대상지반인 연약점토층 밑에 존재하는 지지층까지 모래말뚝을 관통시키지 않고 미관통 상태 그대로 SCP를 지반 중에 조성하는 공법으로 본 연구에서는 저치환율인 경우 압밀도에 따른 미관통 SCP공법과 관통 SCP 공법을 병용한 복합지반의 압밀침하 거동을 수치해석을 통해 비교 하였다. 본 연구결과 관통 SCP지반의 침하특성은 압밀도에 상관없이 거의 일정하나 미관통 SCP지반의 침하특성은 압밀도가 감소하고 관통율($H_d/H$)이 감소할수록 상부점토지반의 침하량이 더 크게 증가되었다. 또한 미관통 SCP의 하단부에는 응력집중효과가 발휘되지 않았으며 응력분담비는 압밀도에 관계없이 거의 일정한 양상을 보였다.