• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.233-236
• /
• 1999

The welding residual stress should be considered in fatigue stress analysis because it develope during the process of the electric resistance spot welding and it causes bad affect on the fatigue crack initiation and growth at nugget edge of spot welded points. Therefore the accurate estimation of residual stress is crucial. In this study, nonlinear finite element analysis on welding residual stress generated during the process of the spot welding was conducted, and their results were compared with the experimental data measured by X-ray diffraction method. From the results, it was found that welding residual stress existed as tension in the nugget center and as compression around the nugget edge.

• Structural Engineering and Mechanics
• /
• v.55 no.5
• /
• pp.913-929
• /
• 2015

The ratcheting and strain cyclic behaviour of joined conical-cylindrical shells under uniaxial strain controlled, uniaxial and multiaxial stress controlled cyclic loading are investigated in the paper. The elasto-plastic deformation of the structure is simulated using Chaboche non-linear kinematic hardening model in finite element package ANSYS 13.0. The stress-strain response near the joint of conical and cylindrical shell portions is discussed in detail. The effects of strain amplitude, mean stress, stress amplitude and temperature on ratcheting are investigated. Under strain symmetric cycling, the stress amplitude increases with the increase in imposed strain amplitude. Under imposed uniaxial/multiaxial stress cycling, ratcheting strain increases with the increasing mean/amplitude values of stress and temperature. The abrupt change in geometry at the joint results in local plastic deformation inducing large strain variations in the vicinity of the joint. The forcing frequency corresponding to peak axial ratcheting strain amplitude is significantly smaller than the frequency of first linear elastic axial vibration mode. The strains predicted from quasi static analysis are significantly smaller as compared to the peak strains from dynamic analysis.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.375-384
• /
• 2019

The purpose of this study is to investigate the relationship among stress, smartphone addiction, and depression of university students and whether depression is mediators in the relationship between stress and smartphone addiction. For this purpose, data were collected from May 1st to 31, 2017 from 400 university students, and analyzed 381 valid ones. Frequency analysis, reliability analysis, correlation analysis and regression analysis were used as analysis methods; and the Soble test was conducted in addition to verification of mediator effect according to procedures of Baron & Kenny(1986) for verification of mediator effect. The results of this study are as follows. First, stress of the subjects was positively correlated with depression(employment stress r=.353, economic stress r=.193, heterosexual relationship stress r=.138) and smartphone addiction(employment stress r=.262, economic stress r=.178, heterosexual relationship stress r=.190). Second, depression was a statistically significant partial mediator between employment-stress and smartphone addiction(Z=2.7151, p<.001). Based on the results of this study, I proposed education/counseling programs that can relieve employment-stress and depression.

• Korean Journal of Occupational Health Nursing
• /
• v.23 no.2
• /
• pp.89-96
• /
• 2014

Purpose: The purpose of this study is to discover the influence of the working conditions on women workers' occupational stress. Methods: Descriptive method is used to identify women's stress depending on their general working features and conditions by conducting a survey of them in women-dominated service industries. SPSS 18.0 program is used for data analysis and descriptive statistics is presented with standard deviation, frequency and percentage. ${\chi}^2$-test is used as an analysis tool. To figure out factors that influence their stress, logistic regression analysis is used for general features and working conditions as independent variables, and occupational stress as a dependent variable. Results: As a result, among the independent variables, employment status, weekly working hours, career, shiftwork, and work-family-balance are meaningful factors that influence their stress. Temporary workers' stress is 3.65 times higher (p<.001), and workers working over 48 hours a week have 1.97 times higher stress (p<.003). Workers with over 5 years' career are under 1.73 times higher stress (p<.046) and shift workers are under 3.51 times higher stress (p<.001). Work family balance results in 1.93 times higher stress (p<.009). Conclusion: It is necessary to seek how to prevent and manage women workers' stress considering features.

• Journal of Environmental Health Sciences
• /
• v.28 no.3
• /
• pp.72-76
• /
• 2002

This study aims to explore the importance of job stress for hospital employees and psychosocial risk factors of their job stress. 1,890 survey questionnaires collected from 14 hospitals are used for the analysis. The study results shows that stress is the most important risk factor perceived by hospital workers. Also stress-related symptoms and diseases are perceived to occur most frequently among hospital employees. The multiple logistic regression analysis shows age, working hours, shiftwork, job demand, decision-latitude and social support from supervisor and colleagues affect stress level of hospital employees.

• Journal of the Korean housing association
• /
• v.8 no.2
• /
• pp.71-84
• /
• 1997

The Purpose of this study is to estimate how inclination to move can be appeared by understanding the cognition of a resident on stress due to the residential environment. 240 housewives living in Chiniu were Questioned statistical analysis were used with factor analysis, F-test. Duncan's Multiple range analysis, stepwise regression analysis and stepwise discriminant analysis, The result were summarized as follows 1) The stress of residential environment were clissified by six factors indoor facility, educational environmental. indoor structure, air Pollution noise, traffic convenience. 2) The extent of a stress from residential environment was significantly different in the socio-demographic variable and housing-related variable. 3) The stress of residential environment were affected by the direction of house. 4) The variable discriminating inclination to move were the stress of residential environment(air Pollution). an educational level, the type of housing possession, residential Period and the size of house.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.73-78
• /
• 2011

This study contains to theory and analysis research for the stress and the translation of an expand disk that fix a ring gear for tooth profile machining. The stress of the expand disk is analysed by the finite element method(FEM) to calculate design parameters. From the analysis results, the stress of the expand shows a linear tendency under various fixing force. This results show that the expand disk have a elastic characteristics as a disk spring. The maximum stress was observed on under side in split section of the expand disk. It is verified that the analysis results are useful to calculate design parameters of the expand disk.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.67-72
• /
• 2011

Turbine blades operate under high temperature and pressure. The influence changes according to its width and angle. Thermal stress and pressure are important factors to analyze the stress distribution. The purpose of this study is to investigate the effects of loads on the gas turbine blade using thermal stress analysis. These analysis results show the gas fluid flow with a high pressure around the surface of blade. Gas temperature is related to the pressure of flow around the blade. The stress concentration around blade is shown and the concentration is due to the difference between suction side and pressure side of combustion gas.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.32-37
• /
• 2002

The use of hexagonal ceramic inserts for copper extrusion dies offers significant technical and economic advantages over other forms of manufacture. In this paper the data on the loading of the tools is determined from a commercial FEM package as the contact stress distribution on the die-workpiece interface and as temperature distributions in the die. This data can be processed as load input data for a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the design and a data exchange program has been developed that enables optimal design of the dies taking into account the elastic deflections generated in shrink fitting the die inserts and that caused by the stresses generated in the process. The stress analysis of the dies is used to determine the stress conditions on the ceramic insert by considering contact and interference effects under both mechanical and thermal loads.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.496-499
• /
• 2006

In this study, a practical method of shrinkage stress analysis on concrete slab in multi-story building is proposed, which considers both internal restraint and external restraint variation resulting from construction sequence. The shrinkage stress due to external restraint is obtained by multiplying relaxation coefficient to elastic shrinkage stress. The additional shrinkage stress due to internal restraint is obtained by residual strain of the elastic analysis. A verification example was analyzed and compared by the proposed method and commercial analysis program that is capable of time-dependent analysis of concrete. The results of 10-story example building show that the internal restraint of reinforcement increases the shrinkage stress considerably at the slabs under loose external restraint.