Stress Analysis of a Clamp Chuck for Machining of a Ring Gear

링기어 절삭을 위한 클램프 척의 응력해석

  • 심한섭 (경남과학기술대학교 자동차공학과) ;
  • 김해지 (경남과학기술대학교 자동차공학과)
  • Received : 2011.03.16
  • Accepted : 2011.06.20
  • Published : 2011.06.30

Abstract

This study contains to theory and analysis research for the stress and the translation of an expand disk that fix a ring gear for tooth profile machining. The stress of the expand disk is analysed by the finite element method(FEM) to calculate design parameters. From the analysis results, the stress of the expand shows a linear tendency under various fixing force. This results show that the expand disk have a elastic characteristics as a disk spring. The maximum stress was observed on under side in split section of the expand disk. It is verified that the analysis results are useful to calculate design parameters of the expand disk.

Keywords

References

  1. Brecht, W. A. and Wahl, A. M., "The Radially Tapered Disk Spring", Trans. ASME, Vol. 52, Part 1, 1930.
  2. Almen, J. O. and Laszlo, A., "the Uniform Section Disk-Spring:, Trans. ASME 58, S. 305-314, 1936.
  3. N. Yahata, M. Watanabe and N. Ishii, "Analysis of Coned Disk Spring by Finite-Element Methoth", JSME, C, Vol. 59, No. 567, pp. 260-265, 1993.
  4. N. Kaya, "Optimal design of an Automotive Diaphragm Spring with High Fatigue Resistance", Int. J. Vehicle Design, Vol. 40, No. 1/2/3, pp. 126-143, 2006. https://doi.org/10.1504/IJVD.2006.008457
  5. P. K. Saini, P. Kumar and P. Tandon, "Design and Analysis of Radially Tapered Disc Springs with Parabolically Varying Thickness", Proceedings IMeche, J. of Mechanical Engineering Science, Vol. 221, pp. 151-158, 2007. https://doi.org/10.1243/0954406JMES114
  6. C. Y. Lee, Y. S. Chai, J. D. Kwon, W. H. Nam and T. H. Kim, "Finite Element Analysis and Optimal design of Automobile Clutch Diaphragm Spring", KSME paper A, Vol. 24, No. 6, pp. 1616-1623, 2000.
  7. MSC. Visual NASTRAN for Windows.