• Structural Engineering and Mechanics
• /
• 제12권3호
• /
• pp.231-248
• /
• 2001

The three-dimensional behavior of confined concrete was investigated, including strength enhancement due to triaxial compressive stresses, lateral expansion, compression softening, cover spalling and post-peak ductility. A finite element program based on a nonlinear elasticity methodology was employed to evaluate the ability to model triaxial behavior of reinforced concrete (RC) by combining constitutive models proposed by several researchers. The capability of compression field based models to reproduce the softening behavior of lightly cracked confined concrete was also investigated. Data from tested specimens were used to evaluate the validity of the formulations. Good agreement with the experimental results was obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.45-46
• /
• 2007

One of the major problems faced by the overhead conductor engineer is in the estimation of the loss in strength of conductors caused by long and short term exposures over a period years to elevated temperature. From the standpoint that the life of conductor is influnced by softening of Al wire, the life assessment of conductor was carried out. The aluminum components will be affected most in majority of conductors. The steel core if present will not be affected by temperatures below $225^{\circ}C$. The detailed description will be presented in the text.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.62-72
• /
• 1995

The present study was undertaken to investigate the dry wear mechanism of the alumina ceramics in the purity variation for the wear of STB2. The wear test was carried out under different experimental condition various sliding speed, contact pressure and sliding distance. According as the alumina purity increased, wear volume of the STB2 decreased and minimum value of wear volume was over to high speed side. According as the sliding speed and sliding distance increased, friction coefficient decreased owing to drop of the shear strength, it decresed largely owing to decreased of elastic modulus and thermal conductivity with decrease in alumina purity. Indicative of minimum, value of wear volume, low speed side was abrasive wear, high speed side was wear of heat softening. The friction surface of ceramics protacted by oxide was transfer from STB2.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.439-455
• /
• 2016

This paper presented solutions of displacement and stress for a circular opening which is reinforced with grouted rock bolt. It satisfies the Mohr-Coulomb (M-C) or generalized Hoek-Brown (H-B) failure criterion, and exhibits elastic-brittle-plastic or strain-softening behavior. The numerical stepwise produce for strain-softening rock mass reinforced with grouted rock bolt was developed with non-associative flow rules and two segments piecewise linear functions related to a principle strain-dependent plastic parameter, to model the transition from peak to residual strength. Three models of the interaction mechanism between grouted rock bolt and surrounding rock proposed by Fahimifar and Soroush (2005) were adopted. Based on the axial symmetrical plane strain assumption, the theoretical solution of the displacement and stress were proposed for a circular tunnel excavated in elastic-brittle-plastic and strain-softening rock mass compatible with M-C or generalized H-B failure criterion, which is reinforced with grouted rock bolt. It showed that Fahimifar and Soroush's (2005) solution is a special case of the proposed solution for n = 0.5. Further, the proposed method is validated through example comparison calculated by MATLAB programming. Meanwhile, some particular examples for M-C or generalized H-B failure criterion have been conducted, and parametric studies were carried out to highlight the influence of different parameters (e.g., the very good, average and very poor rock mass). The results showed that, stress field in plastic region of surrounding rock with considering the supporting effectiveness of the grouted rock bolt is more than that without considering the effectiveness of the grouted rock bolt, and the convergence and plastic radius are reduced.

• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.61-70
• /
• 2008

지표면 침하량, 침하 기울기 그리고 터널주변의 지반 변위에 대한 관리와 예측은 도심지 저토피 터널의 설계와 시공에서 주요한 인자가 된다. 저토피 터널에서의 굴착에 따른 변형 해석은 터널 측벽부에서 지표부까지 발달하는 전단대의 변형특성을 파악하는 것이 중요하다. 본 연구는 2차원 실내 터널 모형실험과 전단 탄성계수 및 강도 정수의 저하를 고려한 변형률 연화모델 해석을 통하여 미고결 저토피 터널에서의 굴착으로 인한 변형 거동 특성을 규명해 보았다. 변형률 연화모델을 이용한 수치해석과 모형 터널 실험과의 비교에서 지표면 침하, 천단침하 그리고 전단대의 발달형태에서 부합되는 결과가 나타났다. 본 연구에서 변형률 연화모델은 저토피 터널의 비선형 변형해석에 대하여 적용성이 있음을 알 수 있었다.

• 콘크리트학회지
• /
• 제6권2호
• /
• pp.97-107
• /
• 1994

폴리머 침투콘크리트는 경화된 보통 콘크리트에 폴리머 침투제를 침투시켜 제조되는 신소재의 폴리머-콘크리트 복합체이다. 본 연구는 아크릴계 열가소성수지를 이용한 폴리머 침투콘크리트를 개발하고 폴리머 침투콘크리트 휨부재의 거동평가를 위한 재료모델, 구조해석 과정과 구조해석 프로그램을 개발하는데 목적이 있다. 본 연구는 크게 두 부분으로 구성된다. 첫 번째 단계에서는 결정성 고분자모노머인 methyl methacrylate(MMA)를 대상으로 침투성, 반응성, 열적 안정성 및 물성개선 효과를 종합적으로 분석하여 폴리머 침투제의 구성비와 제조공정을 정립하고, 본 연구의 실험자료로부터 폴리머 침투콘크리트의 제 강도특성, 파괴인성, 파괴에너지, 응력-변형률 관계 및 인장연화 관계를 보통 콘크리트의 압툭강도와 휨강도, 폴리머 함유율, 부재깊이, 초기 인공균열깊이 등의 함수로 각각 실험공식을 도출한다. 두 번째 단계에서는 MMA계 폴리머 침투콘크리트 구조부재의 하중단계별 탄성거동, 극한거동 및 인장연화거동을 해석하기 위한 구조해석 프로그램을 개발하고, 연구결과의 타당성과 적용성을 입증하기 위하여 폴리머 침투콘크리트의 제조공정, 제 실험공식 및 구조해석 프로그램은 실측거동을 잘 반영하고 있으므로 제한된 범위내에서 MMA계 폴리머 침투콘크리트 구조부재의 제조, 물성평가 및 거동해석에 적용 가능한 것으로 사료된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권1호
• /
• pp.64-71
• /
• 2016

본 논문에서는 UHPC 바닥판과 강재 거더를 이용하여 합성보를 구성할 때, UHPC 바닥판의 높은 강도와 강성으로 인하여 합성보 구성 시에 강재 거더의 상부 플랜지를 없앤 역T형 거더를 적용하고자 하였다. 그러나 현재까지 강재 복부에 설치되는 전단연결재에 대한 거동, 역T형 강거더 합성보의 휨거동 특성 등은 실험 및 이론적으로 평가된 적이 거의 없는 실정이다. 이를 위하여 UHPC 압축강도, 전단연결재 간격 및 바닥판 두께 등을 변수로 하는 역T형 거더와 UHPC바닥판 합성보 16개의 휨거동 실험결과를 근간으로 하여 실험결과와 UHPC의 인장연화 거동을 고려한 재료모델 해석결과를 비교하였다. 역해석에 의한 인장연화곡선에서 UHPC의 인장강도는 6.57 MPa(120MPa의 경우) 및 9.57 MPa(150MPa의 경우)를 나타내고 있으며, 전단연결재 간격이 좁을수록 실험결과와 해석결과가 명확하게 근접하는 겻으로 나타났으며, 바닥판 두께가 두꺼우며 UHPC 압축강도가 작을수록 동일한 경향이나, 이 영향은 다소 작은 것으로 나타났다. 따라서 실험결과와 해석결과를 종합적으로 비교하면, UHPC 합성보의 실험결과와 해석결과는 비교적 잘 일치하고 있으므로 재료 실험으로부터 산정된 인장연화곡선은 UHPC의 실제 거동을 합리적으로 반영한다고 판단된다.

• 한국레이저가공학회지
• /
• 제15권1호
• /
• pp.1-5
• /
• 2012

Recently ultra high strength steels(UHSS) has been widely applied to the structural or safety components in the automotive industry. Specially, hot stamping boron steel 22MnB5 has shown the crash-resistant characteristics when applying to bumpers and pillars. Lap joint Laser welding of the hot stamped and die quenched sheets of Boron steel was carried out using 3kW Nd/YAG laser. The appropriate Lap joint laser welding conditions were founded separately for four lap joint combinations. The lower sheest is a hot stamped sheet in common and the upper sheet is selected among the hot stamped steel and high strength steels such as SPCC, 370MPa, and 590MPa grade high strength steels. Cross bead sections and local hardening and softening were observed as well as tensile-shear test results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.97-102
• /
• 1992

To predict the shear strength of low - rise reinforced concrete shear walls with boundary elements, truss model theory considering the Vecchio - Collins stress - strain curve for softened concrete is applied. The model transforms cracked shear walls with a truss which consists of vertical bar. horizontal bar and diagonal concrete strut, and is based on equilibrium and compatibility conditions among three truss components, as well as stress - strain relationship considered for softening in diagonal concrete strut. In barbell specimens(M/VD = 0.75. fc = 420 kg/$\textrm{cm}^2$), the ratio of experimental to analytical maximum shear strength was within 0.83 ν$_{exp}$. / ν$_{cal}$. 1.25 with a relatively good agreement. As a result, the truss model was observed to be capable of predicting the maximum shear strength wi th a reasonable accuracy.acy.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.15-16
• /
• 2017

In this study, the flexural behavior of fiber-reinforced concrete by fiber type were evaluated. As a result, the flexural strength of the hooked steel fiber-reinforced concrete(HSFRC) was lower than that of the amorphous metallic fiber reinforced concrete(AFRC), however it was shown strain-softening behavior by the pull-out of fiber. The flexural strength and the equivalent flexural strength of polyamide fiber-reinforced concrete(PAFRC) were lower than other specimens, but the equivalent flexural strength ratio was similar to that of AFRC. The flexural behavior of the fiber-reinforced concrete was associated with the bonding and pull-out properties of the fiber and matrix depending on the fiber type.