• 동아시아식생활학회지
• /
• 제10권5호
• /
• pp.403-410
• /
• 2000

In order to investigate the possibility of lwo fat meat products, beef patties were prepared with gums such as carrageenan, methyl cellulose, and xanthangum. The quality characteristics of beef patties were examined. Moisture contents of raw and cooked patties of control were lower than those of patties containing gums, and fat content was higher than those of containing gums. There was no significant difference in the protein contents of patties. In case of L-value(lightness) of raw patty, the control was higher than those patties containing gums. a-(redness) and b-value(yellowness) among patties were not significantly different. Cooking yield, fat retention, and water holding capacity of beef patties containing gums were higher than control beef patty, but salt soluble protein and gel strength were not significantly different. Significant difference did not exist among beef patties in hardness, but the chewiness and gumminess of patties containing gums were higher than control. In case of sensory evaluation, there was no significant difference among patties in aroma and palatability. Texture of control was higher than patties containing gums, and juiciness of control was higher than patties containing carrageenan.

• Structural Engineering and Mechanics
• /
• 제27권2호
• /
• pp.149-172
• /
• 2007

An experimental study of five full-scale coupling beam specimens has been conducted to investigate the seismic behavior of strengthened RC coupling beams by bolted side steel plates using a reversed cyclic loading procedure. The strengthened coupling beams are fabricated with different plate thicknesses and shear connector arrangements to study their respective effects on load-carrying capacity, strength retention, stiffness degradation, deformation capacity, and energy dissipation ability. The study revealed that putting shear connectors along the span of coupling beams produces no significant improvement to the structural performance of the strengthened beams. Translational and rotational partial interactions of the shear connectors that would weaken the load-carrying capacity of the steel plates were observed and measured. The hierarchy of failure of concrete, steel plates, and shear connectors was identified. Furthermore, detailed effects of plate buckling and various arrangements of shear connectors on the post-peak behavior of the strengthened beams are discussed.

• 한국의류학회지
• /
• 제45권5호
• /
• pp.866-880
• /
• 2021

This study aimed to ex situ colorize laccase-entrapped bacterial cellulose (BC) with natural phenolic dyes, namely,madder, turmeric, and cochineal, and to determine the effect of laccase entrapment on the dyeability of BC using color strength (K/S) analysis. Results showed that laccase entrapment improved the dyeability of BC and that pre-entrapment was the most effective method, compared with meta-entrapment and post-entrapment methods. In addition, surface characterizations confirmed the successful entrapment of laccase inside the BC nanostructure and retention of the cellulosic and crystalline structures of BC. The washing durability test confirmed that the K/S value of BC had improved after laccase entrapment. Furthermore, laccase-entrapped BC colorized with cochineal dye had the highest washing durability due to the high molecular weight of cochineal dyerelative to the other dyes. This study suggests a novel method for enhancing the dyeability and washing durability of BC colorized ex situ with natural phenolic dyes by laccase entrapment.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.339-346
• /
• 2022

Silicon (Si) has attracted considerable attention due to its high theoretical capacity compared to conventional graphite anode materials. However, Si-based anode materials suffer from rapid capacity loss due to mechanical failure caused by large volume change during cycling. To alleviate this phenomenon, crosslinked polymeric binders with strong interactions are highly desirable to ensure the electrode integrity. In this study, thermally crosslinked polyimide binders were used for Si-alloy anodes in Li-ion batteries. The crosslinked polyimide binder was found to have high adhesion strength, resulting in enhanced electrode integrity during cycling. Therefore, the Si-alloy anodes with crosslinked polyimide binder provide enhanced electrochemical performance, such as Coulombic efficiency, capacity retention, and cycle stability.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권4호
• /
• pp.20-23
• /
• 2010

In this study, the electromechanical property of REBCO coated conductor (CC) tape adopting a stainless steel substrate has been investigated. Sample was subjected to uniaxial tension and measured its mechanical properties at RT and 77 K. $I_c-{\varepsilon}_t$ relations was also studied in which the strain and stress corresponding to the 95% $I_c$ retention and reversible strain limit were measured. In addition, these results were compared to the case of conventional REBCO CC tape adopting a Hastelloy substrate. As a result, by adopting a stainless steel substrate comparable strength and good electromechanical property to Hastelloy one could be achieved.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.287-295
• /
• 2002

Statement of Problem. Endodontically treated teeth frequently required posts and cores to provide retention and resistance form for crowns. In spite of excellent mechanical properties of metal post and core, its metallic color can be detected through all ceramic restorations occasionally. To solve esthetic problems of metal post and core zirconia post system has been introduced recently. Purpose. The purpose of this study was to examine the fracture strength and mode of resin root analogs restored with zirconia, gold and titanium posts with resin, ceramic and metal cores after cementation with metal crowns. Materials and methods. To avoid the morphological variations of natural teeth, 40 root analogs were fabricated with composite resin. Forty resin root analogs were randomly assigned to four groups according to post and core materials: Group A: cast gold post and core and complete cast crowns, as control. Group B: titanium posts (Parapost, Coltent/Whaledent Inc., NJ, USA) and composite resin cores. Group C: zirconia posts (Cosmopost, Ivoclar AG, Schaan/Liechtenstein) and composite resin cores Group D: zirconia posts and heat-pressed ceramic cores (IPS Empress Cosmo Ingots, Ivoclar AG) After thermocycling ($5^{\circ}C{\sim}55^{\circ}C$, 30 sec.), cyclic loading was applied at 3mm below the incisal edge on the palatal surfaces at an angle of 135 degree to the long axis (2Hz, 50N, 50000cycles). Fracture strength was measured by universal testing machine (Instron, High Wycombe, UK) and fracture pattern of restored resin root analogs was also evaluated. Results and conclusion. Within the limitations of this study following results were drawn. 1. Resin root analogs restored with zirconia posts and composite resins demonstrated lowest fracture strength among tested groups. 2. There was no significant difference in the fracture strength between zirconia posts and heat pressed glass ceramic cores and cast gold posts and cores 3. The fracture strength of resin root analogs restored with titanium posts and composite resin cores was lower than that of gold posts and cores. 4. The deep oblique fracture lines were dominantly observed in root analogs restored with cast gold post and core and zirconia post and heat-pressed ceramic core groups.

• 한국산학기술학회논문지
• /
• 제20권11호
• /
• pp.527-536
• /
• 2019

본 연구에서는 PTT BCF의 열과 자외선에 의한 취화거동과 분산염료의 열 및 자외선에 의한 퇴색거동을 연구하였다. 염료의 퇴색과 PTT BCF의 취화를 억제시킬 수 있는 첨가제를 방사과정에서 첨가하여 그 효과를 알아보았다. PTT BCF의 열처리 이후 취화거동은 열처리 온도와 노출시간이 증가할수록 취화현상이 가속화되어 시료의 인장강도 저하가 두드러졌다. 시료가 120℃까지의 온도에 노출하였을 때는 인장강도의 저하가 크지 않으나 그 이상의 온도인 150℃에서는 노출시간에 비례하여 급격한 인장강도 저하를 보였다. 열에 의한 취화는 산화방지 첨가제가 높은 온도에서는 그 효과가 안정적이지 않으며 산화반응이 급격하였다. 열처리 이후 시료의 퇴색은 열처리 온도가 증가할수록 K/S 값이 감소하였고, 노출시킨 시간이 증가할수록 퇴색되는 경향이 강하게 나타났다. 특히 고온으로 갈수록 열에 의한 퇴색 거동이 급격하게 증가하였으며 열퇴색 억제제가 그 효과를 발휘하지 못했다. 자외선 조사 이후 PTT BCF의 취화거동과 퇴색거동을 인장강도 변화와 K/S 값 변화로 각각 살펴보았다. 자외선 조사에 따른 취화는 열처리 시의 취화보다 더 크게 나타났으며, 특히 장시간 동안 노출된 경우 인장강도의 저하가 급격하였다. 또한 K/S 값의 변화 역시 온도와 노출시간이 증가할수록 퇴색거동이 강하게 나타났다. 시료의 취화거동과 퇴색거동은 자외선 조사의 경우가 더 가혹하게 나타났다. 열 및 자외선 모두가 분산염료의 퇴색에 영향을 주며, 자외선 조사는 같은 온도에서 노출했을 때에 비해 아주 높은 퇴색 속도를 보였다. 결론적으로 열과 자외선에 의한 퇴색과 취화는 특정 산화방지제와 자외선흡수제에 의해 다소 억제되어 저하되었다.

• 대한치과교정학회지
• /
• 제32권2호통권91호
• /
• pp.143-153
• /
• 2002

콤포지트와 여러가닥 강선을 사용하여 제작된 접착식 보정장치는 심미적이며, 효과적인 보정장치라 할 수 있다. 이 연구는 접착식 보정장치의 전단접착강도를 측정하고, 접착식 보정장치의 제작 시 사용하는 여러가닥 강선 및 접착방법의 이상적인 조합을 제시하기 위해 디자인되었다. 교정치료를 위해 발거한 건전한 상하악 소구치 160개를 사용하여 80개의 시편을 제작하였다. 접착면적 및 강선의 길이, 콤포지트의 두께를 동일화하고, 직접접착 및 간접접착의 방법으로 여러가닥 강선을 접착하여 접착식 보정장치를 제작하였다. 만능시험기를 사용하여 각 시편에서의 전단접착강도 및 강선의 탈락시까지의 신장량을 측정하여, 다음과 같은 결론을 얻었다. 1. 6가닥, 0.0155인치의 강선에서 가장 큰 최대 접착강도를 보이고, 3가닥, 0.0195인치의 강선에서 가장 작은 최대 접착강도를 보였는데, 그 차이는 유의할 만큼 크지 않았다(p<0.05). 즉 강선의 직경 및 가닥수는 접착강도와 큰 연관성이 없다. 2. 3가닥, 0.015인치의 강선에서 가장 큰 신장량을 보여 주었고, 3가닥, 0.0195인치 강선에서 가장 작은 신장량을 보여주었다(p<0.05). 강선의 직경이 작을수록 신장량은 크게 나타났으나, 강선의 가닥수는 신장량과 큰 연관성이 없다. 3. 두 가지 접착방법의 비교에서 간접 접착술식을 사용했을 때 더 큰 접착강도 및 신장량을 보여 주었고, 통계적으로 유의한 차이를 나타냈다(p<0.05).

• 펄프종이기술
• /
• 제47권1호
• /
• pp.10-16
• /
• 2015

Bio-binder is well known as a promising alternative binder for SB latex because it is eco-friendly and inexpensive, compared to synthetic latex. SB latex in top coating color was substituted with starch-based bio-binder to investigate its effects on the coating color and its coated paper properties. Bio-binder contributed to the increase of coating color viscosity, and the improvement of water retention. Most optical properties except opacity were deteriorated by the increase of bio-binder dosage. It was also found that the increase of bio-binder substitution in top coating color brought about the increase of roughness, and decrease of coated paper gloss, print gloss, dry and wet pick strength. However the stiffness and the ink set-off of the bio-binder coated paper were improved. Overall, mostly adverse effects of bio-binder on the properties of coating color and its paper were observed. Therefore, it is not recommended to use bio-binder as top coating color.

• 멤브레인
• /
• 제19권1호
• /
• pp.63-71
• /
• 2009

본 연구에서는 연료전지용 전해질 복합체용 지지체 막을 저가의 우수한 기계적 열적 안정성을 가지는 Polysulfone으로 상전이 법을 이용하여 제조하였다. 제조된 막을 이용하여 농도변화와 노출시간의 변화에 따른 열 수축율, 통기도, 모폴로지, 기계적 물성 및 다공도를 측정하였다. 모폴로지를 조절하기 위해 공기 중 노출 시간과 고분자 농도가 제어되었으며, 제조된 막은 고분자 농도 변화에 관계없이 모두 스폰지 구조를 나타내었다. 고분자의 농도가 증가함에 따라 기계적 열적 안정성은 증가하였지만, 다공도는 감소하는 결과를 보였다. 실험결과 20 wt%의 PSf 고분자 용액을 사용하여 2분의 노출시간을 두고 제조된 고분자 막에서 연료전지용 복합막으로 사용되기 위한 충분한 다공도(80%)와 기계적(tensile : 1.3 MPa), 열적(MD, TD shrinkgage < 1%) 안정성을 나타내었다.