• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.73-80
• /
• 2001

The shear strength of jointed rock is influenced by effective normal stress, joint wall compressive strength, joint roughness and so on. Since joint roughness makes considerable influences on shear strength of jointed rock, many studies tried to get quantitative joint roughness parameter. Until now, Joint Roughness Coefficient, JRC proposed by Barton has been prevalently used as a rock joint roughness parameter In spite of its disadvantages. In this study, a quantification of rock joint roughness is performed using surface roughness parameter, Rs. Proposed method is applied to rock core specimens, field joint surfaces, and JRC profiles. The scale of fluctuation is introduced to extend the suggested method to the large scale field joint surface roughness. Based on the quantification of joint surface roughness, joint shear tests are performed with the portable shear box. The relationship between joint surface roughness and joint shear strength is investigated and finally, a rock joint shear strength equation is derived from these results. The equation has considerable credibility and originality in that it is obtained from laboratory tests and expressed with quantified parameter.

• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.83-98
• /
• 2017

Stress-strength reliability problems arise frequently in applied statistics and related fields. In the context of reliability, the stress-strength model describes the life of a component, which has a random strength X and is subjected to random stress Y. The component fails at the instant that the stress applied to it exceeds the strength and the component will function satisfactorily whenever X > Y. The problem of estimation the reliability parameter in a stress-strength model R = P[Y < X], when X and Y are two independent two-parameter Lindley random variables is considered in this paper. The maximum likelihood estimator (MLE) and Bayes estimator of R are obtained. Also, different confidence intervals of R are obtained. Simulation study is performed to compare the different proposed estimation methods. Example in real data is used as practical application of the proposed procedure.

• Steel and Composite Structures
• /
• 제23권2호
• /
• pp.239-250
• /
• 2017

In the concept of two-parameter fatigue failure criterion, the material fatigue failure is determined by the damage degree and the current stress level. Based on this viewpoint, a residual strength degradation model for stud shear connectors under fatigue loads is proposed in this study. First, existing residual strength degradation models and test data are summarized. Next, three series of 11 push-out specimen tests according to the standard push-out test method in Eurocode-4 are performed: the static strength test, the fatigue endurance test and the residual strength test. By introducing the "two-parameter fatigue failure criterion," a residual strength calculation model after cyclic loading is derived, considering the nonlinear fatigue damage and the current stress condition. The parameters are achieved by fitting the data from this study and some literature data. Finally, through verification using several literature reports, the results show that the model can better describe the strength degradation law of stud connectors.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2053-2061
• /
• 1994

The static and fatigue tensile tests have been conduted to predict the fatigue life of 8-harness satin woven and plain woven carbon/epoxy composite plates containing a circular hole. A fatigue residual strength degradation model, based on the assumption that the residual strength for unnotched specimen decreases monotonically, has been applied to predict statistically the fatigue life of materials used in this study. To determine the parameters(c, b and K) of the residual strength degradation model, the minimization technique and the maximum likelihood method are used. Agreement of the converted ultimate strength by using the minimization technique with the static ultimate strength is reasonably good. Therefore, the minimization technique is more adjustable in the determination of the parameter and the prediction of the fatigue life than the maximum likelihood method.

• 동력기계공학회지
• /
• 제14권4호
• /
• pp.56-62
• /
• 2010

This paper is concerned with the stochastic nature of elevated temperature tensile strength and creep rupture time in 18Cr-8Ni stainless steels. The Weibull statistical analysis using the NRIM data sheet has been performed to investigate the effects of variability of the elevated temperature tensile strength and creep rupture time on the testing temperature. From those investigations, the distributions of temperature tensile strength and creep rupture time were well followed in 2-parameter Weibull. The shape parameter and scale parameter for the Weibull distribution of tensile strength were decreased with increasing the testing temperature. For the creep rupture time, generally, the shape parameter were decreased with increasing the testing temperature.

• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.575-581
• /
• 2007

허프 변환(Hough transform)은 영상에서 몇 개의 파라미터로 표현되는 기하학적 요소 추출을 위해 널리 사용되고 있는 방법 중 하나이다. 하지만 허프 변환은 영상의 한 픽셀이 허프 공간(Hough space)의 한 방정식에 대응되는 일대다 특성으로 인해 잡음에 민감한 특성을 갖는다. 이를 개선하기 위해 경계선의 강도를 이용한 허프 변환(edge strength Hough transform)이 제안되었고, 제안된 방법은 잡음 민감성이 감소됨이 증명되었다. 하지만 허프 변환은 허프 공간과 영상의 크기, 잡음의 정도에 따라 검출된 요소의 품질이 달라지므로 필요한 파라미터 값들을 실험적으로 결정해야 하는 단점이 있다. 이 논문에서는 경계선 강도 허프 변환에서 중요한 역할을 하는 두 개의 파라미터, 감쇄 파라미터(decreasing parameter)와 확장 파라미터(broadening parameter) 값을 결정하는 방법을 유도한다. 제시된 방법은 사전에 정해지는 허프 공간의 크기와 영상의 크기만을 이용하여 파라미터 값을 결정하므로, 주어진 조건에 맞는 최적의 파라미터를 자동적으로 찾아낼 수 있다. 유도한 방법의 유효성은 서로 다른 파라미터 값을 이용한 실험을 통해서 확인할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권6호
• /
• pp.127-134
• /
• 2011

고력볼트 길이-직경비가 5d 이상인 경우, 시험을 통한 결과를 활용하여 현장에서 볼트 체결을 하도록 권고하고 있을뿐 길이-직경비에 따른 별도의 규정 및 지침은 없다. 국내에서는 고력볼트 체결법으로 너트회전법이 아닌 토크관리법이 적용하고 있고 최근에는 KS B 2819의 '구조물용 토크-전단형 고장력 볼트'(이하, TS 고력볼트)가 주로 사용되고 있기 때문에 길이 인자에 따른 규정이 국외 기준에 비해 미비한 것이 현실이다. 따라서, 본 논문에서는 TS 고력볼트의 길이인자에 따른 적정 축력 도입을 위한 소요 너트회전각 및 토크를 분석하여 길이변수에 따른 특성을 평가하고자 한다. 실험결과의 분석에서는 통계분석 프로그램 Minitab을 활용하여 길이변수에 대한 유효성을 정량적으로 분석했다.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.709-717
• /
• 1996

Design parameter of Si3N4 for engineering part could be calculated through the measurement of tensile strength with cylindrical specimen($\Phi$=7.15, ι=110mm) Relative densities of Si3N4 test specimen prepared by pressure-less sintering (PLS) and sinter/HIP were 98.5 and 99.2% respectively. Tensile strength of Si3N4 was 378 MPa for PLS and 509 MPa for sinter/HIP. By the Weibull statistic Design parameter such as Weibull modulus m=8-12 could be calcuated. Fracture strength of Si3N4 related to volume could be effectively pridicted by using Weibull theory.

• Communications for Statistical Applications and Methods
• /
• 제25권4호
• /
• pp.355-371
• /
• 2018

The two parameter negative exponential distribution has many practical applications in queuing theory such as the service times of agents in system, the time it takes before your next telephone call, the time until a radioactive practical decays, the distance between mutations on a DNA strand, and the extreme values of annual snowfall or rainfall; consequently, has many applications in reliability systems. This paper considers an estimation problem of stress-strength model with two parameter negative parameter exponential distribution. We introduce a maximum penalized likelihood method, Bayes estimator using Lindley approximation to estimate stress-strength model and compare the proposed estimators with regular maximum likelihood estimator for complete data. We also introduce a maximum penalized likelihood method, Bayes estimator using a Markov chain Mote Carlo technique for incomplete data. A Monte Carlo simulation study is performed to compare stress-strength model estimates. Real data is used as a practical application of the proposed model.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.265-269
• /
• 1996

We have studied the effect of the mesogenic core of nematic liquid crystals (NLCs) for polar (out-of-plane tilt) anchoring strength and surface order parameter on rubbed polyimide (PI) surfaces. The order of polar anchoring strength for NLCs on rubbed PI surfaces is 5CB > PCH5 > CCH5. From the above results, we suggest that the polar anchoring strength depends on the polarizability of the NLCs. The surface order parameter for NLCs is 5CB > PCH5 > CCH5 on rubbed PI surfaces. We conclude that the polar anchoring strength is strongly related to the surface order parameter on rubbed PI surfaces.