• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1215-1220
• /
• 2000

Blast-Furnace Slag, a by-product of the iron or steel industry, has potential sa a cementitious material. The addition of a Blast-Furnace Slag generally reduces the heat of hydration and can confer significant improvements in resistance to sulfate attack and alkali-aggregate reaction, as well as increases in ultimate strength. But it also reduces early-age strength. In this study, for the purpose of improvement of early-age quality of Blast-Furnace Slag concrete, we choose blaine fineness of $6, 000~8, 000cm^2/g$ of Blast-Furnace Slag, and investigate the various properties of concrete. As a result, workability and early-age strength of Blast-Furnace Slag concrete were improved according to the increase of blaine fineness of Blast-Furnace Slag.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.281-286
• /
• 2001

The development of automobile, vessel, rail road, and machine industry leads increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 900,000 ton a year, but most WFS buries itself and only 5~6% WFS is recycled as a material in construction materials. In this study, WFS is used as a fine aggregate for concrete. Five types of concretes aimed at the specified strength of 240$\pm$10 kgf/$cm^{2}$ , air contents of 4.5$\pm$1% and slump of 12$\pm$1.5cm were mixed with washed coarse seashore sand(WFS) in which salt was removed and then optimum mix proportion of concrete was determined. Moreover, basic properties such as setting time, workability, bleeding and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In .addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.277-280
• /
• 2003

The purpose of this study is for the active use of the fly ash, which is a by-product of the combustion pulverizes coal thermal power plants, to compensate for the lack of landfill and for conservation of energy, by using fly ash as the supplementary cementitious material, and to prove its possibility as the related products of the cement. First of all, we examined strength development of Micro grinding fly ash by elevating its fineness and using $Na_{2}SO_{4}$ as an activator to elevate pozzolanic reaction of fly ash. Following fly ash replacement ratio and curing temperature we hope to prove its properties to suggest its possibility in the concrete and cement industry. In case of water curing, the more fineness and higher annexing of activator is, the higher strength is, and the higher curing temperature is the more pozzolanic reaction happens.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.699-702
• /
• 2005

This study evaluates the properties of porous concrete for pavement according to content of silica fume and steel fiber. The results of the test indicate that in every condition, the void ratio and the coefficient of water permeability of porous concrete for pavement satisfy both the domestic standards and proposition values. Among the properties of strength, the compressive strength satisfies the standards in the specification of KNHC as for every factor of mixture but in the case of the flexural strength, more than $0.6vol.\%$ of steel fiber satisfied the JCI proposition values. The case when silica fume and steel fiber are used simultaneously presents the strongest durability and Noise Reduction Coefficient is 0.48 to prove that it possesses almost $50\%$ sound absorption.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.206-207
• /
• 2014

Blast furnace slag is one kind of industrial by-product and was utilized with recycled fine aggregates for the manufacture of zero cement mortar. As the blast furnace slag was from different areas, the strength of the specimen using blast furnace slag showed different performances. In this study, blast furnace slag generated in different areas in Korea has been chosen, fundamental performances of the blast furnace slag blended mortar has been tested to evaluate the quality of the blast furnace slag. Results showed that difference for flowability is limited. As the alkali activation of the blast furnace slag, the compressive strength showed different results. The flexural strength showed little difference when the aggregates and types of blast furnace slag changed.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.135-141
• /
• 1981

This study was conducted to survey the end-use properties of the commercial men's socks. Date were obtained from 16 samples of men's socks gathered from department store, markets, specialty chain and variety store in street. Stretchness, performance of rib top, fiber contents, strength (abrasion and bursting), pilling properties and color fastness of socks tested in this study were as follows. 1. Stretchness of socks was sufficient but elongation of rib top was insufficient, therefore these facts are getting to become problem to consumers. 2. Fiber contents of samples were not in accord with the labelled item and criteria of Textile Fiber Product Identification Act. 3. Strength and pilling properties were vaious in according to fiber contents of socks. Socks blended of synthetic fibers were superior to that pure natural fibers in strength but not in pilling. 4. Color fastness to perspiration and rubbing were sufficient on the whole, but fastness to laundering in stain were very insufficient.

• International Journal of Reliability and Applications
• /
• v.13 no.2
• /
• pp.71-80
• /
• 2012

This paper introduces a new approach for evaluating reliability of a complex system in terms of distributional parameters where analytical determination of reliability is intractable. The concept of discrete approximation, reported in the literature so far, fails to meet the latter requirement in terms of distributional parameters. The current work aims at offering a bound based approach where reliability planners not only get a clear idea about the extent of error but also can manipulate in terms of distributional parameters. This reliability approximation has been under taken under the Weibull frame work which is the most widely used model for reliability analysis. Numerical study has been carried out to examine the strength of our proposed reliability approximation via closeness between the two reliability bounds. This approach will be very useful during the early stages of product design as the distributional parameters can be adjusted.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.41-49
• /
• 2020

To improve the problem of strength reduction of unary and binary blended non-cement concrete that occur at room temperature, comparative analysis was conducted based on the slump and compressive strength properties of ternary blended non-cement concrete in which cement was replaced with silica fume, fly ash, and blast furnace slag, and the following conclusions were drawn. The ternary blended non-cement concrete showed higher compressive strength than binary binder concrete, and the slump reduction was less when 10% silica fume was mixed. In addition, the appropriate composition ratio range of each by-product was suggested according to slump and compressive strength level based on ternary diagram.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.2
• /
• pp.65-75
• /
• 2013

In this study, the engineering characteristics of volcanic ash-cement soil mixtures and zeolite-cement soil mixtures are investigated by using unconfined compression test, freezing-thawing test, SEM and XRD analysis. The samples were mixed with volcanic ash from Mt. Baekdusan or porous zeolite, and cement as the ratios of 3.5:1, 4.0:1, 4.5:1, 5.0:1 with and without metakaolin. It is confirmed that compressive strength degraded with increasing of the amount of volcanic ash or zeolite, and increased with addition of metakaolin as a binder. Moreover, test results suggested that the mixtures provided sufficient freezing-thawing resistance. In addition, ettringite as a product of cement hydration was detected by SEM and XRD, and that possibly contributes to the strength of the mixtures.

• ALGAE
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2005

Agar was extracted from Gelidium amansii, which was harvested at the shores of Jeju Island in South Korea. As a unique solvent, the ability of dimethyl sulfoxide (DMSO) was used to separate agarose from agar by removing agaropectine and quality of the resultant agarose was characterized for chromatography purposes. Agar sample was agitated by motor-driven stirrer with DMSO in a water bath (at 70$^{\circ}C$ for 2 h) and centrifuged (3,000 rpm for 20 min). Resultant upper agarose layer was gelled, washed, dried and milled. The quality of agarose was evaluated by the analysis of proximate chemical composition, sulfate content, gelling strength and DNA migration. In this study, the separated agarose showed low sulfate amount (0.28%) and showed high gel strength (1190 g ${\cdot}\;cm^{-2}$). The resolution power and the ligase activities gave clear picture about the suitability of the present agarose for practical purposes.