• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1752-1758
• /
• 2018

In a low-voltage distribution system, the molded case circuit breaker (MCCB) is a widely used device to protect loads by interrupting over-current; however the hot gas generated from the arc discharge in the interrupting process depletes the dielectric recovery strength between electrodes and leads to re-ignition after current-zero. Even though the circuit breaker is ordinarily tripped and successfully interrupts the over-current, the re-ignition causes the over-current to flow to the load again, which carries over the failure interruption. Therefore, it is necessary to understand the dielectric recovery process and the dielectric recovery voltage of the MCCB. To determine these characteristics, a measuring system comprised of the experimental circuit and source is implemented to apply controllable recovery voltage and over-current. By changing the controllable recovery voltage, in this work, re-ignition is driven repeatedly to obtain the dielectric recovery voltage V-t curve, which is used to analyze the dielectric recovery strength of the MCCB. A measuring system and an evaluation technique for the dielectric recovery strength of the MCCB are described. By using this system and method, the measurement to find out the dielectric recovery characteristics after current-zero for ready-made products is done and it is confirmed that which internal structure of the MCCB affects the dielectric recovery characteristics.

• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.25-32
• /
• 2018

Purpose: This study aimed to investigate the relationship between trunk control and pulmonary function and respiratory muscle strength in stroke patients. Methods: This study included 30 patients who had been clinically diagnosed with strokes, and trunk control abilities were measured using the trunk impairment scale (TIS). The subjects were classified into a group with high trunk control ability (TIS score ${\geq}20$) and a group with low trunk control ability (TIS score < 20). The patients' forced vital capacity (FVC), forced expiratory volume in one second (FEV1), peak expiratory flow (PEF), maximal inspiratory pressure (MIP), and maximal expiratory pressure (MEP) were measured. To compare the pulmonary function and respiratory muscle strength between the two groups, the measurement data were analyzed using an independent T-test, and the relationship between TIS and respiratory function was analyzed using a Pearson correlation. Results: The high trunk control ability group had significantly higher pulmonary function and respiratory muscle strength than the low trunk control ability group. Significant positive correlations were found between trunk control and FVC, FEV1, PEF, MIP, and MEP. Conclusions: This study demonstrated that trunk control affects pulmonary function and respiratory muscle strength in stroke patients.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.1-8
• /
• 2011

To measure the sensitivity of the hydrogen embrittlement from plated high strength bolts (SWCH18A, F11T), the bolt was stressed by a corresponding to the amount of tensile strain of 5% and 20%, and then the bolt developed a crack on the surface. The bolt that didn't have concentrated hydrogen, even though it was stressed by a corresponding the amount of tensile strain of 5% and 20%, no crack developed. However, the bolt that had concentrated hydrogen, developed cracks from the thread crest to the root. It is impossible to measure the hydrogen amount from plated high strength bolts using Hydrogen-Determinator, because of the limitation of the minimum sample size (about 1g as a mass or $5{\times}5{\times}5 mm^3$ as a volume). Therefore, the sensitivity of hydrogen embrittlement can be measured by observing the presence of cracks on the surface of plated high strength bolts which are stressed by a corresponding to the amount of tensile strain of 5% and 20%.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.189-195
• /
• 2023

In this study, as one of the eco-friendly dyeing methods, indigo, Phellodendron amurense and Caeasapinia sappan were complexed dyed on cotton fabric. For complexed dyeing, the cotton that was pre-dyed 5 times with indigo was dyed 1 ~ 2 times repeatedly with Phellodendron amurense and Caeasapinia sappan. Then the color, tensile strength, density, and color fastness of complexed dyed sample were analyzed and the following analysis results could be obtained. As a result of color difference measurement, the L* value was 22.7 in the sample in which the cotton was dyed 5 times and then the Phellodendron amurense was dyed 1 time, and the K/S value was 15 or higher in all samples. As a result of measuring the strength, cotton fabrics tended to have a slight decrease in tensile strength when complexed dyeing. As a result of measuring the density, the density decreased by 15 ~ 20% in all samples at the warp and increased by 20 ~ 30% in the weft due to the complexed dyeing of cotton fabric. Moreover, the fastness to washing and drycleaning showed good results of 2 ~ 3 or higher, and the light fastness was 4 or higher.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.25-28
• /
• 2002

Contact type Ic measurement system is needed to measure Ic continuously for long Bi-2223 tapes. Voltage and current terminals were designed several shapes for 4-probe method Ic measurement. Voltage terminals were made with brass and current terminals were made with Cu. We used 2 kinds of Bi-2223 tapes with different strength. When we measured Ic of Bi-2223 tape with Ag-Mg sheath, The proper weight was 0.3 kg and sharp pin type was better. according to voltage terminal shape and load. In case of Bi-2223 tape with Ag-Mn sheath, the proper terminal weight was 4 kg and sharp pin type was bad. It was possible to make continuous contact type Ic measurement system because We could get proper data - terminal shapes and loads - through these experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.4227-4240
• /
• 2019

In this paper, we present our proposed magnetic induction based wireless communication system. The proposed system is designed to perform communication as well as distance measurement in underground environments. In order to improve the communication quality, we propose and implement the adaptive channel compensation technique. Based on the fact that the channel may be fast time-varying, we keep track of the channel status each time the data is received and accordingly compensate the channel coefficient for any change in the channel status. By using the proposed compensation technique, the developed platform can reliably communicate over distances of 10m while the packet error rate is being maintained under 5%. We also implement the distance measurement block that is useful for various applications that should promptly estimate the location of nearby nodes in communication. The distance between two nodes in communication is estimated by generating a table describing pairs of the magnetic signal strength and the corresponding distance. The experiment result shows that the platform can estimate the distance of a node located within 10m range with the measurement error less than 50cm.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.4
• /
• pp.1-5
• /
• 2020

Heart consists of myocardium cells and the electrophysiological activity of the cells generate magnetic fields. By measuring this magnetic field, magnetocardiogram (MCG), functional diagnosis of the heart diseases is possible. Since the strength of the MCG signals is weak, typically in the range of 1-10 pT, we need sensitive magnetic sensors. Conventionally, superconducting quantum interference devices (SQUID)s were used for the detection of MCG signals due to its superior sensitivity to other magnetic sensors. However, drawback of the SQUID is the need for regular refill of a cryogenic liquid, typically liquid helium for cooling low-temperature SQUIDs. Efforts to eliminate the need for the refill in the SQUID system have been done by using cryocooler-based conduction cooling or use of non-cryogenic sensors, or room-temperature sensors. Each sensor has advantage and disadvantage, in terms of magnetic field sensitivity and complexity of the system, and we review the recent trend of MCG technology.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.52-58
• /
• 2000

Spot welding, namely a kind of electric resisting welding has been used widely in field of automobile and aircraft industries because of easiness to apply. Specimens used in this study was a mild steel of 1.2mm thickness and the electrode was a Cu-Cr alloy of 6mm diameter. The surface sheared of specimens after testing of tensile shear was observed by SEM(scanning electron microscope) after ultrasonic cleaning for 10min., and microstructures and grain size of all specimens were measured with using of O.M.(Optical microscope). By the means of measurement and observations of tensile shear load, fatigue strength and share surface, the weldability of spot welding was evaluated. When tensile shearing testing, fracture starting point in all specimens was took place at the bond between HAZ(Heat affected zone) and nugget. With increasing in number of layers, fatigue strength was decreased. With increasing in electric current, grain size in the HAZ became more fine.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.36-44
• /
• 2003

The cement-based system among S/S(Solidification/Stabilization) is widely used to treat hazardous wastes. In this study, tannery sludge was solidified to evaluate the stabilization effects of using admixtures in the cement-based S/S. Fly ash as substitute also used to increase the strength of the S/S of hazardous waste. The compressive strength measurement and leaching experiment of chromium metal of solidified mortar were carried out to compare and evaluate the physical and chemical characteristics of solidified hazardous waste sludge. From the result of this study, there was increased of compressive strength by using AEW-3(early-hardening AE water reducing agent), and leaching concentration of chromium became low enough to satisfy the regulatory criteria. The successful solidification for the organic contaminant and heavy metal in hazardous waste should enable to treat by cement-based system using early-hardening AE water reducing admixture and fly ash as substituted cement.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.41-51
• /
• 1996

This paper presents a fuzzy data fusion scheme which can analyze the sensor condition, the strength and location of a force applied to a test material. These can be realized by the modelling and fusioning of sensor signals and sensor properties. The technique uses, as the inference variables, relative magnitude of data (RMD), absolute magnitude of data (AMD) initial state (IS), synchronized relational function (SRF) and asynchronized relational function (ARF). To show the usefulness of this scheme, an experiment on the cantilever bar and six strain gages is carried out. The location of the force is inferred from SRF and ARF and the strength from RMD and AMD. In particular, the strength is compared with the measurement data of the force sensor.