• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.61-70
• /
• 2011

본 연구에서는 아스팔트 콘크리트의 전단 물성을 고려한 영구변형 예측 모델을 개발하였다. 아스팔트 콘크리트의 전단 물성과 영구변형과의 상관성을 고찰하기 위해서 세 가지 종류의 아스팔트 콘크리트에 대해서 반복재하삼축압축(RLTC) 시험 및 삼축압축강도 시험과 간접인장강도 시험을 다양한 하중과 온도 조건에서 시행하였다. 주어진 아스팔트 콘크리트에 대하여 온도가 증가함에 따라 점착력은 감소하였으나 온도가 $40^{\circ}C$ 이상인 경우 마찰각은 온도 변화에 민감하지 않은 거동을 나타내었다. 축차응력, 구속압, 온도 및 하중 주파수가 영구변형에 미치는 영향이 크다는 것을 관측할 수 있었다. 이러한 실내 시험 결과로 부터 아스팔트 콘크리트의 전단물성과 하중재하시간에 기초한 영구변형 모델을 개발하였다. 또한 일반적인 포장 단면에서 실시한 포장가속시험 결과를 이용해서 영구변형 모델을 보정하였다. 본 연구에서 제안한 영구변형 모델을 이용하여 다양한 온도와 하중조건에서 아스팔트 콘크리트의 영구변형을 예측할 수 있었다.

• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.397-414
• /
• 2020

In this paper, practical predictive models for soil shear strength parameters are proposed. As cohesion and internal friction angle are of essential shear strength parameters in any geotechnical studies, we try to predict them via artificial neural network (ANN) and neuro-imperialism approaches. The proposed models was based on the result of a series of consolidated undrained triaxial tests were conducted on reinforced sandy soil. The experimental program surveys the increase in internal friction angle of sandy soil due to addition of polypropylene fibers with different lengths and percentages. According to the result of the experimental study, the most important parameters impact on internal friction angle i.e., fiber percentage, fiber length, deviator stress, and pore water pressure were selected as predictive model inputs. The inputs were used to construct several ANN and neuro-imperialism models and a series of statistical indices were calculated to evaluate the prediction accuracy of the developed models. Both simulation results and the values of computed indices confirm that the newly-proposed neuro-imperialism model performs noticeably better comparing to the proposed ANN model. While neuro-imperialism model has training and test error values of 0.068 and 0.094, respectively, ANN model give error values of 0.083 for training sets and 0.26 for testing sets. Therefore, the neuro-imperialism can provide a new applicable model to effectively predict the internal friction angle of fiber-reinforced sandy soil.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.585-594
• /
• 2009

In this present study, to performed the model test and estimated the behavior characteristics of twin tunnel in accordance with the variation of the whole failure parameters which is the strength of the ground, distance of tunnel, angle of the joint, installation of tension bolts and the blasting load. To carry out the numerical analysis for verification of model test results and analyze the sensitivity on failure parameters using model test and numerical analysis results. Based on sensitivity analysis results, to propose the most habitually failure parameters in tunnel scale model test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.281-286
• /
• 1998

The aim of this study is to compare the development of compressive strength of high-Flowing concrete with maturity and to investigate the applicability of strength prediction models of concrete. An experiment was attempted on the high-flowing concrete mixes using Ordinary portland cement, High belite cement, Blast furance slage cement and replaced Fly-ash of 30% by weight of Ordinary portland cement, the water-binder ratios of mixes being 0.35 and the curing temperatures being 30, 20, 10, 5$^{\circ}C$. Test results of mixes are statistically analyzed to infer the correlation coefficient between the maturity and the compressive strength of high-flowing concrete.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.185-197
• /
• 2017

In this study, we propose a new equation that evaluates the shear strength of beam-column connections in reinforced concrete and steel beam (RCS) composite materials. This equation encompasses the effect of shear keys, extended face bearing plates (E-FBP), and transverse beams on connection shear strength, as well as the contribution of cover plates. Mobilization coefficients for beam-column connections in the RCS composite system are suggested. The proposed model, validated by statistical analysis, provided the strongest correlation with test results for connections containing both E-FBP and transverse beams. Additionally, our results indicated that Architectural Institute of Japan (AIJ) and Modified AIJ (M-AIJ) equations should be used carefully to evaluate the shear strength for connections that do not have E-FBP or transverse beams.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.9-10
• /
• 2014

Cracks on the surface of latex-modified concrete using ready mix concrete (R-LMC) are attributable to its sensitivity to air temperature, relative humidity and wind velocity. Insufficient curing under the windy condition causes plastic shrinkage cracks. The cracked areas should be replaced to prevent development of larger cracks. This paper investigated how the vibration resulted from crushing concrete for replacement of the partial cracked area affects bond strength of R-LMC at early age. To analyze bond strength of R-LMC, the commercial Finite Element (FE) program, ABAQUS Standard/Implicit version 6.12 was used, and bond strength was tested by ASTM C1583-04. The real vibration was applied to this FE model using an acceleration measurement equipment.

• 디지털융복합연구
• /
• 제11권11호
• /
• pp.321-326
• /
• 2013

GPS는 실내에서 수신률이 떨어지는 특성을 가지고 있다. 이러한 단점을 극복하기 위해 AP의 RSS를 이용한 측위기술에 대한 연구와 개발이 이루어지고 있다. 측위기술과 더불어 신호 세기만을 가지고 장애물까지 판단할 수 있다면 활용도와 효율성 측면에서 이를 응용한 서비스를 하는 입장에서도 별다른 구축비용이 들지 않는다는 장점이 있다. 본 논문에서는 RSS(Received Signal Strength)를 이용하여 장애물을 판단하는 방법을 제시한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.177-183
• /
• 1999

The major object of this study is to investigate experimentally the experimental equation by the non-destructive testing methods of ultrasonic pulse velocity, rebound number, combined method of ultrasonic pulse velocity and rebound number, maturity which are applicable to the evaluation of compressive strength of concrete at early ages. Also test result of mix are statistically analyzed to infer the correlation coefficient between the maturity and the compressive strength of concrete. The results show good application of Logistic curve for estimating strength development under various curing temperature. The relation between ultrasonic pulse velocity, rebound number, combined method of ultrasonic pulse velocity and rebound number and compressive strength of concrete have low correlation coefficient, but maturity method show good correlation coefficient.

• Structural Engineering and Mechanics
• /
• 제17권6호
• /
• pp.863-878
• /
• 2004

Steel corrosion in reinforced concrete structures leads to concrete cover cracking, reduction of bond strength, and reduction of steel cross section. Among theses consequences mentioned, reduction of bond strength between reinforcement and concrete is of great importance to study the behaviour of RC members with corroded reinforcement. In this paper, firstly, an analytical model based on smeared cracking and average stress-strain relationship of concrete in tension is proposed to evaluate the maximum bursting pressure development in the cover concrete for noncorroded bar. Secondly, the internal pressure caused by the expansion of the corrosion products is evaluated by treating the cracked concrete as an orthotropic material. Finally, bond strength for corroded reinforcing bar is calculated and compared with test results.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.123-130
• /
• 2006

In manufacturing, process automation and parameter optimization are required in order to improve productivity. Especially in welding process, productivity and weldablity should be considered to determine the process parameter. In this paper, optimization methodology was proposed to determine the welding conditions using the objective function in terms of productivity and weldablity. In order to conduct this, welding experiments were carried out. Tensile test was performed to evaluate the weldability. Neural network model to estimate tensile strength using the laser power, welding speed, and wire feed rate was developed. Objective function was defined using the normalized tensile strength which represented the weldablilty and welding speed and wire feed rate which represented the productivity. The optimal welding parameters which maximized the objective function were determined.