• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.27-36
• /
• 2014

Due to the latitudinal location of Korea, the seasonally frozen ground has been focused on as research topics such as the frost heaving under the asphalt road rather than the permafrost ground. However, the recent construction of the second Korean Antarctic research station, the Jangbogo station and the participation on the development of the natural gas pipeline in Russia arouse the research interests on the behavior of the permafrost ground. At the design process of the geotechnical structures on the permafrost ground, the evaluation of the creep characteristics of the frozen soil is very crucial. Since the domestic specification on the frozen soil testing does not exist currently, it is necessary to evaluate the creep characteristics of frozen soils systematically with regard to the affecting factors. Therefore, the creep characteristics of the frozen specimens of dense Jumoonjin sand were evaluated under various loads at -5 and $-10^{\circ}C$. Based on the test results, as the load became close to the strength and the temperature became lower, the duration of the secondary creep became shorter and more distinct tertiary creep responses were observed.

• Korean Journal of Social Welfare
• /
• v.51
• /
• pp.157-182
• /
• 2002

This study attempts to identify the changes in social reactions to disabilities in general, and to research the contextual implication of these changes in social work practice in Korea. In the early years after the Industrial Revolution, disability was conceived as social unfitness and it was assumed that the cause and responsibility could be attributed to people with disabilities. But, in the midst and late 20th century, social responsibility for people with disabilities was argued and generally accepted. As the results of these changes, conceptual models explaining disabilities have changed gradually; there has been a transition, so called, from individual model to social model. In a similar vein, WHO has refined the definition and classification of disability. Related to these changes, social welfare service paradigm for people with disabilities has shifted. This paradigm shift can be explained with the perspective of strength approach, empowerment approach, case management and independent living model. In Korea, 1998 Act on welfare for people with disabilities meant that social service for the disabled were categorized with, namely, residential service, community rehabilitation service and vocational rehabilitation service. Recently, the extent of these services has been rapidly broadened. In these situation, this study researched to identify the implications on social work practice in the context of changes in social response, conceptual model, definition and also service paradigm. Such as the followings are enumerated for the implications: disabled person's participation in assessment process, development of assessment tools focusing on social and environmental perspectives, reinforcement of information service helping self-determination, supporting on formal and informal helping network, expanding self-help programs and, finally, a shift from displacement model to support model.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.1
• /
• pp.45-56
• /
• 2013

Rock strength test on Dunduri cliff, Chungnam province, Korea, was performed using N-type Schmidt hammer and the depositional ages of the sediments overlying the cliff were derived using OSL dating method. The averaged R-values of the cliffs investigated here were lower than those observed from the shore platforms, but with larger scatter in the former. R-values were negatively correlated to cliff face retreat, implying that the irregularity of the coastal rock faces was closely related to lithology as the weaker rocks retreated much faster than the harder rocks. The overlying deposit of the cliff tends to be thicker at valleys and were poorly sorted with angular to subangular clasts in a matrix of silt. The OSL ages (ca. 70-77 ka) presented here were older than the previously reported exposure ages (ca. 7-30 ka) of the cliff face. Therefore, it is likely that the present sea cliff was developed by expansion of the platform which had been covered by slope deposits since the last interglacial and exposed again during the Holocene.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.139-151
• /
• 2018

Objectives : A self-made "Tomotherapy couch device" capable of correcting the Yaw direction was fabricated and evaluated for its usefulness. Materials and Methods : "Tomotherapy couch device" capable of correcting the Yaw direction is made of rigid fibreboard with a flexural strength of $200kg/cm^2$. CBCT Image from Novalis Tx and Iso-Align Phantom from MED-TEC were used to evaluate the physical accuracy. The treatment plan was designed using Accuray $Precision^{TM}$ and In House Head and Phantom. Accuray $PrecisionART^{TM}$ and $Precision^{TM}$ was used to evaluate dose. Results : Evaluation results, the self-fabricated device accurately corrected the setup error, Target dose was within 95 %~107 % of all. In order to directly evaluate the OAR dose according to the Yaw change, the absolute dose was measured. As a result, when the error in the Yaw direction was $3^{\circ}$, the specific OAR showed a maximum difference of 18.4 %. Conclusion : "Tomotherapy couch device" capable of correcting the Yaw direction can be manufactured at a lower cost compared to the effect, and it can prevent the patient's MVCT image dose for re-imaging. Accurate radiation therapy without errors can be performed.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2011

Optimal dispersion and fabrication conditions of carbon nanotube (CNT) embedded in phenolic resin were determined by electrical resistance measurement; and interfacial property was investigated between plasma treated carbon fiber and CNT-phenolic composites by electro-micromechanical techniques. Wettability of carbon fiber was improved significantly after plasma treatment. Surface energies of carbon fiber and CNT-phenolic nanocomposites were measured using Wilhelmy plate technique. Since surface activation of carbon fiber, the advancing contact angle decreased from $65^{\circ}$ to $28^{\circ}$ after plasma treatment. It was consistent with static contact angle results of carbon fiber. Work of adhesion between plasma treated carbon fiber and CNT-phenolic nanocomposites was higher than that without modification. The interfacial shear strength (IFSS) and apparent modulus also increased with plasma treatment of carbon fiber.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.518-524
• /
• 2009

The quality attributes of frozen dough mixed with milk proteins (casein: C and whey protein: W) and polysaccharides (sodium alginate: A and ${\kappa}-carrageenan:$ K), and with 1.6% (w/w) wheat flour, were investigated to improve the quality of dough. Addition of milk protein-polysaccharide mixtures increased water absorption, as assessed by farinography, compared with control material. Dough prepared with CA and WA mixtures showed longer development times and increased valorimeter values compared with control samples. However, addition of milk protein-polysaccharide mixtures decreased dough stability, elasticity, and strength. Gelatinization temperature and the temperature at maximum viscosity, as measured by amylography, increased on addition of milk protein-polysaccharide mixtures, but the maximum viscosity decreased compared with control samples. The control showed a lower dough volume than did dough prepared with CA and WA mixtures. These results indicate that addition of milk protein-polysaccharide mixtures, especially CA and WA, improved the quality of frozen dough,and could be useful to prevent bread becoming stale.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.1
• /
• pp.66-71
• /
• 1986

The studies were carried out to screen the optimum conditions for enzymatic degumming of raw silk yarn and silk fabric by use of Alkalase, a protease produced by Bacteria, comparing with Papain and Trypsin representing natural proteolytic enzymes. 1. The optimum temperature and acidity of degumming solution were 70$^{\circ}C$, pH 5-6 for Papain degumming, 40$^{\circ}C$, pH 8 for Trypsin and 50-60$^{\circ}C$ pH 8-9 for Alkalase. 2. By increasing the Alkalase concentration in the range of 0.6 to 1.0 gram per liter, the time for enzymatic degumming of silk yarn could be reduced by 40 minutes. 3. In degumming of silk yarn by Alkalase, the pretreatment of 95$^{\circ}C$, 10 minutes at 0.1% sodium bicarbonate solution or posttreatent of 80$^{\circ}C$, 20 minutes at 2% (o.w.f.) sodium silicate solution improved the efficiency of enzymatic degumming, as compared to that of nontreatment. 4. The breaking strength, elongation and Lousiness results of enzymatically degummed silk yarn were apt to be improved more than those of soap-degummed one. 5. When the pretreatment of alkaline solution was done with over 20% of degumming ratio, the enzymatic degumming efficiency of both Havutae and Crepe de chine could be reached to the same level with those of soap-soda degummed. 6. As the pretreated silk fabric with 20% of degumming ratio was under action of three proteases, respectively, the deumming efficiency of Havutae and Crepe de chine were completed by Alkalase more than by Papain or Trpysin. 7. The stiffness of enzymatically degummed Crepe de chine was not only reduced by 17% more than that of soap-soda degummed one but also the Drape coefficient was decreased in enzymatically degummed fabrics, which was closely related with the soft touch of degummed fabrics.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.514-520
• /
• 2021

In this study, EMP shielding performance was evaluated using electric furnace oxidized slag to give EMP shielding performance to concrete among the most used materials in construction sites. As a result of the evaluation, the component of the electric furnace oxidation slag was found to have an Fe₂O₃ content of 34%, and it was also found to contain an MgO component of about 4.8%. In addition, as a result of conducting an aggregate stability evaluation due to concerns about expansion due to MgO components, it is considered to be suitable for the KS standard. EMP shielding performance evaluation result showed that there was no correlation in EMP shielding performance according to compressive strength, and that general aggregates did not have EMP shielding. However, it was found that the aggregate using the furnace oxidized slag had excellent EMP shielding performance, and the shielding performance improved as the thickness increased. As a result of the durability evaluation, it was found that the EMP shielding concrete has the durability of abortion compared to the general concrete. Through this, it is thought that it will be good to improve the shielding rate if concrete is manufactured using electric furnace oxide slag when constructing EMP shielding structures in the future.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.393-416
• /
• 2009

This paper explores the technology resource-based determinants influencing internationalization performance of Korean software-related new ventures. On the ground of the study by Zahra et al.(2003), this paper aims to test empirically in Korea how interaction effects of tangible and intangible technological resources, as firm capability, are related to software new ventures' internationalization performance. The test results shows that intangible technological resource represented by R&D intensity is not significantly related to internationalization performance, but reveals that intangible technological resource represented by strength of technological cooperation network and technological reputation is positively and significantly associated with internationalization performance. Internationalization performance is more significantly and positively associated with the interactions of tangible technological resource and intangible technological resource than those resources respectively. The implication for the findings in the paper is that cutting edge technological capability of software new ventures can be more closely associated with internationalization performance if those resources are fully utilized or leveraged by intangible resources acquired by cooperation with local networks and created through technological reputation of new ventures.

• Clean Technology
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2018

Industrial use of waste oyster shells is limited because of requiring excessive energy for converting natural oyster shells in the form of calcium carbonate ($CaCO_3$) into calcium oxide (CaO) for this purpose. This study aimed to develop energy-saving process for producing solidifying agent using waste oyster shells for backfill materials. It was suggested that oyster shells were converted to calcium sulfates which were mixed with sodium hydroxide solution and red clay, forming solid specimen. The optimal concentrations of sulfuric acid for sulfation of oyster shell and sodium hydroxide to generate calcium hydroxide ($Ca(OH)_2$), were determined. Unconfined compressive strength of solid specimen increased with increasing the content of solidifying agent while it increased also with increasing ratio of natural oyster shells to coal ash. The result clearly demonstrates that solidifying agent consisting of sulfuric acid-treated oyster shell, coal ash, and sodium hydroxide solution, can be effectively utilized for preparing backfill materials using natural oyster shell and coal ash. Sulfuric acid-treated oyster shell-based solidifying agent has not been previously developed and will contribute to broaden industrial application of waste oyster shells.