• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.10-14
• /
• 2013

This paper is aimed to investigate the actual conditions of standalone PV(Photovoltaics) streetlight in public place and analyze cause of failure and derive the method of decrease for standalone PV streetlight. The cost of installing standalone PV streetlight in a public for the safety and convenience of life is expensive(300 million won per unit). Management of standalone PV streetlight is important because it is operating system itself, after installation, but concern degree of management is very low and development of technology has not been done. Accordingly, standalone PV streetlight in public place is not operate in night, this phenomenon is lasted for several days to months. Therefore this study, for standalone PV streetlight constantly to keep the normal operation, investigation conducted to check status of standalone PV streetlight(50 units), the voltage of the main parts and analyze the cause of the failure. In addition, the improvement of standalone PV streetlight is suggested by using FTA(fault tree analysis).

• International Journal of Advanced Culture Technology
• /
• v.2 no.2
• /
• pp.1-6
• /
• 2014

In this paper, we propose an intelligent streetlight system that has a complex sensor module of temperature, humidity, luminance and motion detection and controlled by the fuzzy logic based central monitoring system in order to get flexible and precise manipulation of the streetlight system in USN environment. The proposed streetlight system provides low power consumption and high efficiency by using sensed data from the complex sensor module, which were collected, processed, and analyzed by the fuzzy logic based central monitoring system. The performance of the proposed streetlight system is to be evaluated by a simulation study in terms of power savings and safety at the fields constructed as a test-bed under several suggested scenarios. Finally, we know that the proposed intelligent streetlight system can maximize the energy savings efficiently with the fuzzy logic based central monitoring system and selective remote dimming control by connecting it to the wireless ubiquitous sensor network (USN) using a Zigbee module.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2103-2108
• /
• 2016

Energy saving is as important as developments of green energy and alternative energy. This paper describes design of hybrid type streetlight for railway station with renewable energy as photovoltaic, wind, secondary battery. In designing hybrid type streetlight for railway station, generation energy with renewable energy and reliability is strongly needed to meet the demand of railway station. In order to achieve the high performance of a streetlight, photovoltaic, wind and secondary battery system, PV tracker, monitoring and GUI system with logging function are designed. To verify of performance of hybrid type streetlight for railway station, we have demonstration test to get of generation energy and flow of energy and the results are present in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.95-102
• /
• 2014

In this paper, we propose the high speed PLC-based automatic control system for a smart LED streetlight. The proposed the automatic control system were constructed of a power line modem part and monitoring part, streetlight controller part for the high speed communication frequency band and streetlight ballasts characterization and real-time remote control using a high-speed PLC network, and it was designed to meet to lighting grades conditions of KS road lighting standards. The proposed automatic control system were easy monitoring of the power consumption using PC through to the comparison result of the existing streetlight system. As a result, it was confirmed to the possibility of efficient operation for the real-time monitoring and maintenance by induction of reasonable power consumption through to the LED streetlight state checking and remote-control. In addition, we proved to improvement of expected effects for the power cost savings, the energy efficiency, and streetlight differentiation and advanced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8901-8907
• /
• 2015

Conventional streetlight with the not-adjustable light distribution characteristic is generating light pollution such as glare, damage to the crops and disturbed sleep, because beam of streetlight is not distributed evenly according to the surrounding areas and road conditions. In this paper, we proposed the new structure LED streetlight controlled light irradiation angle according to the surrounding areas and road conditions. Proposed LED streetlight are available to the adjustable light distribution characteristic using the half-circle angle control device. Result of measurement and simulation, beam angle is made available to control at least from $100^{\circ}$ up to $154^{\circ}$, average illumination exceeded 15% of KS regulation and overall uniformity exceeded more than 50% of KS regulation. the Developed large capacity LED streetlight luminaire is considered to minimize glare and light pollution and optimize uniformity ratio of illuminance.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.508-512
• /
• 2014

This paper suggests the control system and algorithm for auto and manual control of the streetlight using RF system. There are two control system in this auto control algorithm. One is group control, the other individual control. In case of group control, if a car is detected by the object detecting sensor of the system installed on the streetlight, it will turn on the light per group by transmitting the RF signal. The streetlight turns on separately when it detects people or a car parked on the shoulder in accordance with the individual control. Also, there is manual control algorithm that manager can check surrounding environment and condition of the streetlight by RF signal and various sensors. So, not only the proposed system reduce meaningless energy consumption, but also it offers convenience regarding maintenance and control of the streetlight.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2021

In this paper, to expand the use of standalone street lights, an algorithm for controlling LED energy consumption was proposed. The proposed method uses an LED module of a standalone street light divided into n zones. This is a method of reducing total power consumption by preventing the increase in power consumption due to high heat generation by weakly operating the entire LED according to the illuminance. When the amount of sunlight decreases, the whole LED operates weakly and then brightens, and unlike streetlight that act as streetlight, a method of dividing LEDs by area and limiting the number of LEDs operating according to illumination intensity was proposed. This is a way to use a lot of time with limited battery capacity by reducing the generation of heat that consumes the most power in streetlight. It is also a method of continuously changing the initial usage area to improve the total usage time of the LED substrate. As a result of the experiment, it was found that the proposed method extends the service time because it generates less heat than the conventional stand-alone streetlight.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.4
• /
• pp.79-84
• /
• 2010

In recent years, conventional streetlight is replaced by LED streetlight to reduce power consumption dramatically and to maximize lighting effects. However the characteristic of power LED itself driven by high current to increase the illumination, we need to develop effective heat release device. This study suggests new concept of heat dissipation device using PCM (Phase Change Material) and shows an experiment results to investigate thermal effects of PCM.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.19-23
• /
• 2011

The current streetlight system have been tried various attempts. but during maintenance, it has caused the traffic congestion and many risk factors. In addition, maintenance costs are very expensive to manage and the local government have to establish countermeasures about the present condition. If neglected, it may cause a variety of social problems. so, there should be a measure to prevent problems. This rotational and up-and-down type streetlight can be a solution to these factors and it has been highlighted indirectly in terms of green growth because we have to take advantage of the value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.632-637
• /
• 2016

A streetlight control system was developed using information technology and LED lights for efficient management and energy savings. The proposed system can control the power usage of an LED streetlight luminaire using GPS satellite communication and an Arduino with a built-in microprocessor. A control circuit was designed to control the current using GPS, a control unit, transistor, resistor, and constant-current supply circuit. The circuit was validated through experiments with normal operation. Using GPS, the control system extracts accurate time and location information according to the season, and it controls the current supplied to the LED streetlight according to the extracted time. Power consumption was reduced by more than 11%. The control system could reduce accidents caused by conventional lighting systems used to save energy, and it could improve the inefficient management of energy by preserving constant brightness of a streetlight at times and in areas that have less traffic.