• 설비공학논문집
• /
• 제26권7호
• /
• pp.322-328
• /
• 2014

Return piping is used in a solar combi-system for heating and hot water supply. When the temperature of the lower side of a storage tank is low due to hot water usage, the returned hot water after heating is mixed with the lower side cold water of the tank, and the useful energy is reduced. We studied the degree of thermal stratification in the tank, using either a diffuser or a manifold to prevent mixing. Using the diffuser, mixing starts from the bottom of the storage tank. On the other hand, the manifold has the marked effect of preventing mixing. As a result of experiments with changing the diameter and number of holes in the manifold, the optimum condition is 8.5 mm diameter and 96 holes, under the condition of 0.3 lpm.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.384.2-384.2
• /
• 2003

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.315-317
• /
• 2006

• 대기
• /
• 제26권4호
• /
• pp.599-615
• /
• 2016

This study investigates the accuracy of short-term ocean predictions during the development of ocean stratification for the Korea Meteorological Administration (KMA) Global Seasonal Forecast System version 5 (GloSea5) as well as the effect of atmosphere-ocean coupling on the predictions through a series of sensitive numerical experiments. Model performance is evaluated using the marine meteorological buoys at seas around the Korean peninsular (KP), Tropical Atmosphere Ocean project (TAO) buoys over the tropical Pacific ocean, and ARGO floats data over the western North Pacific for boreal winter (February) and spring (May). Sensitive experiments are conducted using an ocean-atmosphere coupled model (i.e., GloSea5) and an uncoupled ocean model (Nucleus for European Modelling of the Ocean, NEMO) and their results are compared. The verification results revealed an overall good performance for the SST predictions over the tropical Pacific ocean and near the Korean marginal seas, in which the Root Mean Square Errors (RMSE) were $0.31{\sim}0.45^{\circ}C$ and $0.74{\sim}1.11^{\circ}C$ respectively, except oceanic front regions with large spatial and temporal SST variations (the maximum error reached up to $3^{\circ}C$). The sensitive numerical experiments showed that GloSea5 outperformed NEMO over the tropical Pacific in terms of bias and RMSE analysis, while NEMO outperformed GloSea5 near the KP regions. These results suggest that the atmosphere-ocean coupling substantially influences the short-term ocean forecast over the tropical Pacific, while other factors such as atmospheric forcing and the accuracy of simulated local current are more important than the coupling effect for the KP regions being far from tropics during the development of ocean stratification.

• 복식문화연구
• /
• 제8권5호
• /
• pp.771-784
• /
• 2000

The purpose of this study was to investigate the casual relationships of self-monitoring, face satisfaction, and demographic variables on the purchasing behavior and use of cosmetics of women. Samples wre 479 women in their 20's to 50's in Seoul, Korea. Three factors of the purchase criteria of cosmetics derived by factor analysis : F.1 'intrinsic trait', F.2 'sales promotion and fashion', F.3 'economy. Women high in self-monitor purchased and used cosmetics more than those low in self-monitor. There were significant relationships between the purchasing behavior and use of cosmetics and age, education, and social stratification. Women in their 20's and 30's perceived purchase criteria associated with intrinsic trait such as color and becomingness as more important, 20's sales promotion and fashion, women with less education perceived economy more than did the others. Upper class women showed more concern for intrinsic trait such as quality and color of cosmetics than did lower class. Social stratification, age, self-monitoring, and education had a direct effect on the degree of cosmetics purchase. Self-monitoring and education had a direct effect on the degree of cosmetics use. Age, education, social stratification, and face satisfaction had an indirect effect on the degree of cosmetics purchase and use. The causal relationship of self-monitoring on the use of coloring cosmetics was stronger than the connection between self-monitoring and total cosmetics. The present findings provide that personal trait associated with self-monitoring of women is important variable in understanding of the purchasing behavior and use of cosmetics.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.1926-1938
• /
• 2020

We validated the performance of RELAP MOD3.3 code regarding the hybrid SIT with available experimental data. The concept of the hybrid SIT is to connect the pressurizer to SIT to utilize the water inside SIT in the case of SBO or SB-LOCA combined with TLOFW. We investigated how well RELAP5 code predicts the physical phenomena in terms of the equilibrium time, stratification, condensation against Separate Effect Test (SET) data. We also conducted the validation of RELAP5 code against Integrated Effect Test (IET) experimental data produced by the ATLAS facility. We followed conventional approach for code validation of IET data, which are pre-test and post-test calculation. RELAP5 code shows substantial difference with changing number of nodes. The increase of the number of nodes tends to reduce the condensation rate at the interface between liquid and vapor inside the hybrid SIT. The environmental heat loss also contributes to the large discrepancy between the simulation results of RELAP5 and the experimental data.

• 한국해양환경ㆍ에너지학회지
• /
• 제5권3호
• /
• pp.16-22
• /
• 2002

호수의 온도성층 파기를 위하여 이용되는 수체순환용 공기공급장치의 효과와 최적운용방법에, 거제도의 연초호의 경우에 초점을 맞추어 살펴보았다. 폭기장치의 효과를 가동 전후의 수질을 평가함으로써 고찰하였고 Schladow[1993]의 방법에 기초한 산기장치의 최적설계법 또한 연초호의 상태와 비교를 통하여 제안하였다 전반적인 혼합효과의 파악을 위하여 단순화된 수체모델에 대한 모사시험도 수행하였다 연초호의 경우 폭기장치의 효과가 나타나는 것으로 판단된다.

• 한국포장학회지
• /
• 제29권1호
• /
• pp.27-33
• /
• 2023

본 연구에서는 저온물류 시스템의 단열용기의 온도유지 성능에 대하여 5℃급 저온 LHM을 배치하였을 때 배치구성 조건에 따른 온도특성을 확인하였다. LHM을 단열용기 내부에 배치하였을 때 6면과 5면에 상/하부 배치 비중에 차이를 두고 외기부하에 따른 내부 공기 온도균일도 및 목표 온도 유지시간을 분석하였다. 단열용기 내부 공기는 상부의 상승온도와 이때 발생하는 밀도차에 의한 공기 대류현상이 온도 성층화를 발생시키고, 균일도를 확보하기 위해 LHM의 상부 배치 비중이 하부보다 컸을 때 균일성이 높고 유지 시간이 오래 지속되는 것을 확인하였다. 다만, 상부 배치 비중을 높이기 위해 하부 배치를 제외한 조건에서 높은 균일성을 보이지만 짧은 유지 시간으로 보여 적정조건으로 알맞지 않다. 결과적으로 단열용기의 단열재 대칭구성과 LHM의 동일한 중량을 배치하여 보냉용기를 제작할 경우, LHM의 전면 배치를 바탕으로 하부에 비해 상부 배치 비중을 늘렸을 때 내부 공기 온도의 분포 균일도와 유지시간 성능을 높이는데 효율적인 방안이라고 판단된다. 저온물류 보냉용기 성능분석에 있어, 본 연구를 기반으로 다른 조건의 상변화 온도와 잠열량을 갖는 다양한 저온영역대의 LHM을 적용한 수치해석을 수행하여 성능 예측 결과를 확보할 수 있고 온도 균일도를 위한 단열 및 잠열 복합 구성 이송 용기의 최적 설계조건 수립에 기여할 것으로 기대된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.290-293
• /
• 2006

From the hydraulic experiment, it was concluded that upwelling could be enhanced when the relative structure height (the ratio of structure height to water depth) was 0.3 and stratification parameter was 3.0. In addition, the optimum size of rubbers was determined that the effect of the mean horizontal length of block was affected incident velocity than size of block. In the numerical experiment, the relation between the shape of rubber and stratification parameter was verified, ana the hydraulic characteristics of 3-D flow field around the artificial structures were investigated. Phenomena of flow field around the artificial upwelling structures corresponded with the results of hydraulic experiment. The position with maximum velocity in artificial upwelling structure was the center of top of its front side and the slip stream occurred at the inside and behind-bottom of artificial upwelling structures. The velocity of slip stream and early amplitude of velocity were higher in the inside than the behind-bottom.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.9-18
• /
• 2005

The objective of this study is to analyse the spray characteristics according to the injection duration under the ambient pressure condition, and the injection timing in the visualization engine. In order to investigate the spray behavior, we obtained the spray velocity using the PIV method that has been an useful optical diagnostics technology, and calculated the vorticity from spray velocity component. These results elucidated the relationship between vorticity and entropy which play an important role in the diffusion process for the early injection case and the stratification process for the late injection case. In addition, we quantified the homogeneous diffusion rate of spray using the entropy analysis based on the Boltzmann's statistical thermodynamics. Using these method, it was found that the concentration of spray droplets caused by the increase of injection duration is more effective than the increase of momentum dissipation. We also found that the homogeneous diffusion rate increased as the injection timing moved to the early intake stroke process and BTDC $50^{\circ}$ was the most efficient injection timing for the stratified mixture formation during the compression stroke.