• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.183-186
• /
• 2000

The high temperature deformation behavior of spray-formed Al-19wt%Si-1.87wt%Mg-0.085wt.%Fe alloy was studied by torsion testing in the strain rate range of 0.001-1 sec-1 and in the temperature range of 300-500 $^{\circ}C$. The relationship between stress temperature and strain rate is expressed using the Power law. the behavior of dynamic recrystallization is showed in 300-35$0^{\circ}C$, 1-0.1sec-1 and the behavior of dynamic recovery is showed in 450-50$0^{\circ}C$, 0.01-0.001sec-1 The size of Si particles is mall when the temperature is low and the strain rate is high. The strain rate sensitivity(m) and the apparent activation energy(Q) indicate the dependence on strain rate and temperature for flow stress respectively. The hot ductility is high when m is high and Q is low. The maps of strain rate sensitivity and apparent activation energy suggest the optimum processing conditions.

• Journal of the Optical Society of Korea
• /
• 제3권2호
• /
• pp.64-68
• /
• 1999

The performance of a fiber Bragg grating strain sensor constructed with 3$\times$3 coupler is investigated. A 3$\times$3 coupler Mach-Zehnder (M/Z) interferometer is used as wavelength discriminator, interrogating strain-induced Bragg wavelength shifts. Two quadrature-phase-shifted intensities are synthesized from the as-coupled interferometer outputs, and digital arctangent demodulation and phase unwrapping algorithm are applied to extract the phase information proportional to strain. Due to the linear relation between the input strain and the output of quadrature signal processing, signal-fading problems eliminated. In the experiment, a fiber grating that was surface adhered on an aluminum beam was strained in different ways, and the photodetector signals were transferred and processed in a computer-controlled processing unit. A phase recovery fo 7.8$\pi$ pk-pk excursion, which corresponds to ~650$\mu$strain pk-pk of applied strain, was demonstrated. The sensor system was stable over the environmental intensi쇼 perturbations because of the self-referencing effect in the demodulation process.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.521-525
• /
• 2007

The microstructure and mechanical properties of an oxygen free copper processed by accumulative roll bonding(ARB) at low strain rate were studied. The copper sheets were highly strained up to an equivalent strain of ${\sim}6.4$ by ARB process at ambient temperature. The strain rate of the copper during the ARB was $2.6sec^{-1}$. The microstructure and mechanical properties of the ARB-processed copper were compared to those of the specimens processed by ARB at relatively high strain rate ($37sec^{-1}$). The microstructure and mechanical properties of the copper with ARB process was very similar to each other despite of some differences in recovery.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.195-200
• /
• 2016

In this study, compression tests for the polyisocyanurate foam which is recognized as the insulation material for the storage tank of the liquefied natural gas (LNG) were carried out for investigation of the material characteristic of mechanical behavior. Deformation recovery ratio according to the various initial deformation levels were estimated and the mechanical behavior of foams that are experienced compressive deformation was also obtained experimentally. The test results were analyzed based on the conditions of initially applied strain level and engineering strain rate.

• Composites Research
• /
• 제28권4호
• /
• pp.204-211
• /
• 2015

본 논문에서는 블레이드와 같이 세장비가 크고 초기 비틀림이 존재하는 복합재료로 구성된 날개 구조물에 대한 이차원 단면의 차원축소와 복원관계를 이론적으로 기술하고 이를 이용한 복합재료 로터 블레이드의 효율적인 설계 과정을 기술하였다. 차원축소와 복원해석 수치해석 프로그램인 VABS를 이용하여 단면해석을 수행하고 연성이 고려된 강성행렬과 질량행렬을 중립점에 연결하여 블레이드의 특성을 포함한 1차원 보 모델링을 구성하였다. 1차원 보 모델을 통해 블레이드의 거동을 확인하고 내부하중을 계산하여 단면위치에서 변형률 복원을 수치적으로 계산하고 이산화 된 단면에 수치적으로 매칭하여 시각적으로 형상화하였다.

• 소성∙가공
• /
• 제9권2호
• /
• pp.193-202
• /
• 2000

The influence of rolling draughts on the formation of through-thickness textures in aluminum 5000X sheet was investigated by X-ray texture measurements and microstructure observations. In order to intensify the deformation inhomogeneities, cold rolling was performed without lubrication. Applying a large draught gave rise to the formation of the shear texture at the surface, whereas a normal plane strain testure formed at the surface after deformation with a small draught. The orientation density along the $\beta$-fiber orientations which developed in the center layer of the rolled specimen was also dependent on the strain gradients in a roll gap. Upon annealing, the deformed substructure of sample surfaces was transformed into a fine grained recrystallized microsturcture through extended recovery reaction. However, coarse grains developed after the discontinuous recrystallization which gave rise to the development of the Cube-texture.

• Advances in aircraft and spacecraft science
• /
• 제1권2호
• /
• pp.145-175
• /
• 2014

The results of a series of numerical experiments are presented to verify some of the important developments made in the first part of this paper. Firstly, the static solution of an algebraic system obtained through Strong Formulation Finite Element Method (SFEM) is presented. Secondly, the stress and strain recovery procedure is descripted for the present technique. It will be clear that the present approach is suitable for any strong formulation finite element methodology, due to the presented general approach based on the unknown displacements and on the elasticity equations. Thirdly, the numerical solutions for some classical and other numerical results found in literature are exposed. Finally, an arbitrarily shaped composite plate is solved and good agreement is observed for all the presented cases.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.25-32
• /
• 1995

This study was carried out to examine the influences of fatigue and perspiration on the deterioration of chrome leather for shoes. The samples were treated with acidic and alkaline artificial perspirations and applied cyclic tensile stress, and the elastic recovery from fatigue strain, tensile strength and elongation, stiffness etc. by regions and directions were determined. The physical properties generally indicate considerable difference by regions and directions due to the thickness, entangling state, and arrangement direction of fiber buldles within the leather. By the treatment of artificial perspirations, the length, weight, strength, elastic recovery from fatigue of the lether are decreased and the thicknes, elongation, and stiffness are increased; and their extents by the alkaline perspiration are higher than those by the acidic one. The elastic recovery from fatigue of samples are decreased with increasing fatigue cylcle; and indicate regressive relations against the logarithm of the elapsed time, and the means of regression coefficients are 2.73 > 2.55 > 2.22 for samples treated by the acidic perspiration, untreated, and treated by the alkaline perspiration, respectively. The tensile strength is decreased and elogation is increased by fatigue, but the changes are diminished likely due to a rearrangment of fiber bundles with increasing fatigue cycle. And the samples become a little flexible immediately after fatigue; but stiffen again with elastic recovery from fatigue strain, consequently for some cases their stiffness after recovery are rather greater than those before fatigre.

• 한국식품과학회지
• /
• 제13권1호
• /
• pp.43-52
• /
• 1981

복숭아 solid pack을 변패시키는 내열성 효모의 열저항성 및 최적살균조건을 구명하기 위하여 원료복숭아의 초기 효모오염도를 조사하고 61균주를 분리보관하였다. 이중 내열성이 가장 강한 효모 No.15 균주에 대한 환경요인별 내열성 및 최적살균조건 시험결과는 아래와 같다. 1. 펩톤수와 복숭아쥬스에서 열처리하였을 때 대수기의 생장이 활발한 세포가 90시간 진탕배양후 10일간 유지한 것보다 내열성이 약했다. 2. 열매체로 펩톤수를 사용하여 열처리한 것이 복숭아쥬스에서 열처리한 것보다 내열성이 강했다. 3. 열처리후 회복배지에 있어서 YM 한천보다 복숭아쥬스 한천에서 회복시킨 것이 약했다. 4. 열매체나 회복배지에서의 pH에 따른 내열성은 pH 4.0에서가 pH 3.5에서 보다 내열성이 강했다 5. 일정한 온도로 가열할 때 생잔곡선은 초기의 열에 민감한 부분과 다음의 열에 안정한 부분의 broken curve를 나타내어 D 값을 구할 수 없었다. 6. 복숭아쥬스(pH 3.5)에서 열처리하여 복숭아쥬스 한천(pH 3.5)에 회복시켰을 때의 TDT 곡선에서 직선을 얻었으며 z값은 $4.8^{\circ}C$이었다. 7. 선발된 내열성 효모의 균학적 특성을 검토한 결과 Torulopsis candida로 추정되었으며 복숭아 solid pack에서의 변패성도 확인하였다. 8. 실제 4 oz 복숭아 solid pack에서의 inoculated pack test 결과 최적살균치 P.U. 70/5는 168(Z값$5^{\circ}C$, 기준온도 $70^{\circ}C$, 살균시간 18분, 관내 중심 온도 $78.5^{\circ}C$)이었다.

• 한국방재학회 논문집
• /
• 제5권4호
• /
• pp.29-36
• /
• 2005

본 연구는 부산 가덕도 부근 해성점토에 대하여 일축압축시험을 실시하여 일축압축강도, 최대강도에서의 변형률, 심도와의 관계를 비교 및 분석하였으며 시료에 포함되어 있는 불순물과 시료채취시 충진율이 흙의 일축압축강도와 교란도에 미치는 영향을 파악하였다. 시험결과 시료의 일축압축강도는 최대강도에서의 변형률이 증가함에 따라 감소하는 결과를 보였으며 채취 심도가 깊을수록, 시료채취시의 충진율이 좋을수록 증가하는 추세를 보였다. 특히 시료 충진율의 증가는 일축압축강도 증가를 가져왔고 시료의 등급 또한 높여주었다.