• Smart Structures and Systems
• /
• 제1권4호
• /
• pp.385-404
• /
• 2005

The paper presents a model to calculate reinforcement strain using measured crack width in members under applied tension, flexure, and/or shear stress. Crack mapping using a new type of distributed coaxial cable sensors for health monitoring of large-scale civil engineering infrastructure was recently proposed and developed by the authors. This paper shows the results and performance of such sensors mounted on near surface of two flexural beams and a large scale reinforced concrete box girder that was subjected to cyclic combined shear and torsion. The main objectives of this health monitoring study was to correlate the sensor's response to strain in the member, and show that magnitude of the signal's reflection coefficient is related to increases in applied load, repeated cycles, cracking, and reinforcement yielding. The effect of multiple adjacent cracks, and signal loss was also investigated. The results shown in this paper are an important step in using the sensors for crack mapping and determining reinforcement strain for in-situ structures.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.645-663
• /
• 2015

Recently, an indirect displacement estimation method using data fusion of acceleration and strain (i.e., acceleration-strain-based method) has been developed. Though the method showed good performance on beam-like structures, it has inherent limitation in applying to more general types of bridges that may have complex shapes, because it uses assumed analytical (sinusoidal) mode shapes to map the measured strain into displacement. This paper proposes an improved displacement estimation method that can be applied to more general types of bridges by building the mapping using the finite element model of the structure rather than using the assumed sinusoidal mode shapes. The performance of the proposed method is evaluated by numerical simulations on a deck arch bridge model and a three-span truss bridge model whose mode shapes are difficult to express as analytical functions. The displacements are estimated by acceleration-based method, strain-based method, acceleration-strain-based method, and the improved method. Then the results are compared with the exact displacement. An experimental validation is also carried out on a prestressed concrete girder bridge. The proposed method is found to provide the best estimate for dynamic displacements in the comparison, showing good agreement with the measurements as well.

• Structural Engineering and Mechanics
• /
• 제3권2호
• /
• pp.185-192
• /
• 1995

A numerical algorithm for plane stress and shell elasto-plasticity is presented in this paper. The proposed strain decomposition (SD) algorithm is an elastic predictor/plastic corrector algorithm, and in the context of operator splitting, is a return mapping algorithm. However, it differs significantly from other return mapping algorithms in that only the necessary response functions are used without invoking their gradients, and the stress increment is updated only at the end of the time step. This makes the proposed SD algorithm more suitable for materials with complex yield surfaces and will guard against error accumulation during the time step. Comparative analyses of structural systems using the proposed strain decomposition (SD) algorithm and the iterative radial return (IRR) algorithm are presented. The results demonstrate the accuracy and usefulness of the proposed algorithm.

• 전산구조공학
• /
• 제10권3호
• /
• pp.241-250
• /
• 1997

콘크리트에 발생하는 변형률 국소화는 연화거동에 수반하여 변형이 국부적으로 집중되는 현상으로 이를 유한요소해석 할 수 있는 일관된 알고리즘을 개발하는 것이 본 연구의 목적이다. 변형률 국소화현상이 발생한 콘크리트는 변형률이 집중되는 국소화영역과 그외의 영역인 비국소화영역으로 크게 구분할 수 있으며 국소화영역에서는 연화현상을 포함하는 탄소성거동을 하게 되며 비국소화영역은 손상제하거동을 수반하게 된다. 변형률 국소화현상이 진행중인 콘크리트의 국소화영역을 모델링하기 위하여 열역학적으로 정식화된 전형적인 소성모델에 콘크리트의 극한응력 이후에 비선형 연화로 표현되는 소성거동을 고려할 수 있는 일반화된 Drucker-Prager모델을 도입하였으며 소성이론식의 적분을 위해 return-mapping 알고리즘을 사용하고 일관된 알고리즘을 전개하였다. 또한, 콘크리트의 비국소화영역의 모델링을 위하여 열역학적 자유에너지함수를 수정하여 비선형 탄성 및 손상의 일관된 알고리즘을 전개하였다. 개발된 알고리즘에 의한 유한요소해석을 통해 압축을 받는 콘크리트 부재의 변형률 국소화 현상을 해석하였다.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2009년도 International Meeting of the Microbiological Society of Korea
• /
• pp.110-110
• /
• 2009

• Applied Microscopy
• /
• 제41권3호
• /
• pp.215-222
• /
• 2011

We discuss the experimental procedure for extracting reliable phase information from a defocus series of transmission electron microscopy (TEM) dark-field images using the transport of intensity equation (TIE). Taking InGaN/GaN multi-quantum well light-emitting diode as a model system, various factors affecting the final result of reconstructed phase such as TEM sample preparation, TEM imaging condition, image alignment, the correction of defocus values and the use of high frequency pass filter are evaluated. The obtained phase of wave function was converted to the geometric phase of the corresponding lattice planes, which was then used for the two-dimensional mapping of lattice strain following the dark-field inline holography (DIH) routine. The strain map obtained by DIH after optimized image processing is compared with that obtained by the geometric phase analysis of high resolution TEM (HRTEM) image, manifesting that DIH yields more accurate and reliable strain information than HRTEM-based GPA.

• 한국미생물·생명공학회지
• /
• 제44권4호
• /
• pp.563-570
• /
• 2016

S. griseus wild type에서 dasA 유전자의 과발현에 의해 유도된 기저균사의 ectopic sporulation 관련 유전자를 알아보기 위해서, empty vector가 삽입된 균주와 dasA가 과발현된 균주의 전사체를 DNA microarray법으로 비교하였다. DNA microarray 결과를 토대로 dasA 유전자 과발현 균주에서 2배이상 발현량이 증가되었으며 p-value가 0.05 미만(p-value < 0.05)인 유전자들 중에서 false positive 를 제외시키는 작업을 통하여 최종적으로 4개의 유전자(SGR794, SGR2469, SGR3656, SGR3657)와 3개의 cluster (SGR795-797, SGR2377-2378, SGR6997-6998)를 선발하였다. 이들의 전사량은 low resolution Sl nuclease mapping 법을 통하여 dasA 유전자 과발현 균주에서 증가된 것을 확인하였다.

• 한국식물병리학회지
• /
• 제10권3호
• /
• pp.235-239
• /
• 1994

Viral RNA was extracted from purified Chinese cabbage strain of turnip mosaic virus (TuMV-Ca) from infected leaves of turnip. Polyadenylated genomic viral RNA was recovered by oligo (dT) cellulose column chromatography and used as a template for the synthesis of complementary DNA (cDNA). Recombinant plasmids contained cDNA ranged from about 900 bp to 2, 450 bp were synthesized. Among the selected 41 transformants, pTUCA31 and pTUCA35 had over 2 Kbp cDNA insert. Restriction endonuclease patterns of the clones examined were very similar among them. Clones pTUCA23 and pTUCA31 were overlapped with pTUA35. The longest clone pTUCA35, encoding 3'-end, showed that it contained two sites for EcoRI, and one site for BamHI, ClaI, HincII, SacI and XbaI, respectively. The restriction mapping indicated that the clone pTUCA35 contained partial nuclear inclusion body gene, complete coding region of the coat protein and 3' untranslated region of TuMV-Ca genomic RNA.

• BMB Reports
• /
• 제35권5호
• /
• pp.465-471
• /
• 2002

From fruiting bodies of L. edodes strain L-54, single-spore isolates (SSIs) were collected. Two parental types of L-54 were regenerated via monokaryotization. By means of random-amplified polymorphic DNA (RAPD), DNA samples from L-54, its two parental types, and 32 SSIs were amplified with arbitrary primers. Dedikaryotization was demonstrated, and 91 RAPD-based molecular markers were generated. RAPD markers that were segregated at a 1:1 ratio were used to construct a linkage map of L. edodes. This RAPD-linkage map greatly enhanced the mapping of other inheritable and stable markers [such as those that are linked to a phenotype (the mating type), a known gene (priA) and a sequenced DNA fragment (MAT)] with the aid of mating tests, bulked-segregant analysis, and PCR-single-strand conformational polymorphism. These markers comprised a genetic map of L. edodes with 14 linkage groups and a total length of 622.4 cM.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.101-108
• /
• 2020

The present study intends to analyze damage in thin-walled steel cylinders undergoing constant internal pressure and thermal cycles through use of anisotropic continuum damage mechanics (CDM) model coupled with nonlinear kinematic hardening rule of Chaboche. Materials damage in each direction was defined based on plastic strain and its direction. Stress and strain distribution over wall-thickness was described based on the CDM model and the return mapping algorithm was employed based on the consistency condition. Plastic zone expansion across the wall thickness of cylinders was noticeably affected with change in internal pressure and temperature gradients. Expansion of plastic zone over wall-thickness at inner and outer surfaces and their boundaries demarking elastic and plastic regions was attributed to the magnitude of damage induced over thermomechanical cycles on the thin-walled samples tested at various pressure stresses.