• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1048-1050
• /
• 2017

본 연구에는 핀틀 노즐의 열변형 영향을 평가하기 위해 단방향 유체-구조 연성해석을 수행하였다. 단방향 유체-구조 연성해석을 위해 핀틀-노즐의 내부에 발생하는 압력 및 온도분포를 유동해석을 통해 도출하였고, 압력 및 온도분포 값을 각각의 유체-구조 해석의 하중조건으로 적용하여 핀틀의 변형량을 확인하였다. 변형에 대한 추력특성 변화를 확인하기 위해 양방향 유체-구조 연성해석을 수행 중이다.

• 소성∙가공
• /
• 제13권5호
• /
• pp.409-414
• /
• 2004

TRIP steel has got attention in automobile industry because of its high strength and high formability. However, the information on deformation behavior of TRIP steel, including bending and springback, is not enough until now. In this research, the V-die bending experiment and analysis have been done to obtain the information of springback of TRIP steel. And a new numerical method, where elastic modulus is varied with the change of the strain, was suggested. Tensile test for TRIP steel was done to get tensile properties as well as strain dependency of elastic modulus of the material. Strain-dependency of elastic modulus was used the numerical analysis of V-die bending and unbending process to predict springback amount. The results were compared with experiment, showing reasonable agreement. Through the analysis of V-die bending as well as draw bending of TRIP steel, the proposed scheme with variable elastic modulus was proven to well predict the deformation behavior of TRIP steel during bending and springback.

• Computers and Concrete
• /
• 제17권6호
• /
• pp.831-848
• /
• 2016

This study aims to characterize the multiple cracking behavior of HTPP-ECC (High tenacity polypropylene fiber reinforced engineered cementitious composites) by Digital Image Correlation (DIC) Method. Digital images have been captured from a dogbone shaped HTPP-ECC specimen exhibiting 3.1% tensile ductility under loading. Images analyzed by VIC-2D software and ${\varepsilon}_{xx}$ strain maps have been obtained. Crack widths were computed from the ${\varepsilon}_{xx}$ strain maps and crack width distributions were determined throughout the specimen. The strain values from real LVDTs were also compared with virtual LVDTs digitally attached on digital images. Results confirmed that it is possible to accurately monitor the initiation and propagation of any single crack or multiple cracks by DIC at the whole interval of testing. Although the analysis require some post-processing operations, DIC based crack analysis methodology can be used as a promising and versatile tool for quality control of HTPP-ECC and other strain hardening composites.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.41-57
• /
• 2022

This paper is focused on delamination analysis of a multilayered inhomogeneous viscoelastic beam subjected to linear creep under constant applied stress. The viscoelastic model that is used to treat the creep consists of consecutively connected units. Each unit consists of one spring and two dashpots. The number of units in the model is arbitrary. The modulus of elasticity of the spring in each unit changes with time. Besides, the modulii of elasticity and the coefficients of viscosity change continuously along the thickness, width and length in each layer since the material is continuously inhomogeneous in each layer of the beam. A time-dependent solution to the strain energy release rate for the delamination is derived. A time-dependent solution to the J-integral is derived too. A parametric analysis of the strain energy release rate is carried-out by applying the solution derived. The influence of various factors such as creep, material inhomogeneity, the change of the modulii of elasticity with time and the number of units in the viscoelastic model on the strain energy release rate are clarified.

• Advances in materials Research
• /
• 제13권2호
• /
• pp.87-102
• /
• 2024

This paper is focused on the delamination analysis of a multilayered beam structure loaded in torsion under strain-path control. The beam under consideration has a rectangular cross-section. The layers of the beam are made of different viscoelastic materials which exhibit continuous inhomogeneity in longitudinal direction. Since the delamination is located inside the beam structure, the torsion moments in the two crack arms are obtained by modeling the beam as an internally static undetermined structure. The strain energy stored in the beam is analyzed in order to derive the strain energy release rate (SERR). Since the delamination is located inside the beam, the delamination has two tips. Thus, solutions of the SERR are obtained for both tips. The solutions are verified by analyzing the beam compliance. Delamination analysis with bending-torsion coupling is also performed. The solutions derived are timedependent due to two factors. First, the beam has viscoelastic behavior and, second, the angle of twist of the beam-free end induced by the external torsion moment changes with time according to a law that is fixed in advance.

• 터널과지하공간
• /
• 제20권1호
• /
• pp.49-57
• /
• 2010

이 연구에서는 정수압 지압 조건의 암반에 굴착되는 원형 터널의 탄소성 거동 해석을 위해 GSI 지수의 변형률연화를 고려한 탄소성 해석법이 제안되었고, 그 적용성이 검토되었다. 제안된 수치해석법은 Lee & Pietruszczak(2008)의 탄소성 해석방법을 수정하여 개발되었다. 터널 주변 암반에서는 발파와 굴착에 의한 암반의 손상으로 GSI 지수의 저하가 야기될 수 있다는 가정 하에 GSI 지수의 변형률연화 개념을 도입하였다. 일반화된 Hoek-Brown 식의 강도정수들은 GSI 값을 이용하여 경험적으로 계산할 수 있으므로 GSI 지수의 변형률연화 개념을 도입함으로써 이 강도정수들의 변형률연화가 해석에 반영되도록 하였다. 제안된 방법의 적합성을 검토하기위하여 여러 해석조건에서 원형터널의 탄소성 해를 구하고 그 결과를 고찰하였다.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.103-111
• /
• 2002

열하중과 원심력을 고려한 발전용 터빈 블레이드의 정상 상태 크리프 해석을 수행하였다. 3차원 터빈 블레이드 유한 요소 모델에 대하여 크리프 변형률과 응력을 계산하고 수치적 방법에 의해 크리프 수명을 예측하였다. 약 200시간 정도의 크리프 해석 결과 GTD111 터빈 블레이드는 아직 파손 응력에 도달하지 않았으며, 크리프 응력은 시간이 경과함에 따라 점차 이완되고 있다. 터빈 블레이드의 최대 크리프 변형률은 익형의 압력면 끝단에서 발생하며 수치적 방법에 의해 약 50,000 시간 이후에 파손 변형률에 도달할 것이다. 따라서 현재 터빈의 기동 중 블레이드는 크리프에 의한 손상을 입지 않는다.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.39-46
• /
• 2010

IIn this study, used is the equivalent loading method based on the inherent strain to predict the welding deformation of panel members. Equivalent loads are computed from the inherent strain distribution around weld line, and then applied for the linear finite element analysis. Thermal deformation of panel members can be, of course, carried out through the rigorous thermal elasto-plastic analysis procedure but it is not practical in applying to predicting the welding deformation of large structures such as blocks found in a ship structure from view of computing time. The present equivalent load approach has been applied to flat plate model to verify the present approach, and to several curved plate models having the curvature in the welding direction to investigate the effect of the longitudinal curvature upon the weld-induced deformation. The results are compared with those by thermal elasto-plastic analysis. As far as the present results are concerned, it can be said that the present approach shows good agreement with the results by welding experiment and the rigorous thermal elasto-plastic analysis. The present approach has been also applied to predict the welding deformation of panel block as for application illustration to practical model.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2304-2311
• /
• 2021

The dislocation density in strain-hardened Alloy 690 was analyzed using scanning transmission electron microscopy (STEM) to study the relationship between the local plastic strain and susceptibility to primary water stress corrosion cracking (PWSCC) in nuclear power plants. The test material was cold-rolled at various thickness reduction ratios from 10% to 40% to simulate the strain-hardening condition of plant components. The dislocation densities were measured at grain boundaries (GB) and in grain interiors of strain-hardened specimens from STEM images. The dislocation density in the grain interior monotonically increased as the strain-hardening proceeded, while the dislocation density at the GB increased with strain-hardening up to 20% but slightly decreases upon further deformation to 40%. The decreased dislocation density at the GB was attributed to the formation of deformation twins. After the PWSCC growth test of strain-hardened Alloy 690, the fraction of intergranular (IG) fracture was obtained from fractography. In contrast to the change in the dislocation density with strain-hardening, the fraction of IG fracture increased remarkably when strain-hardened over 20%. From the results, it was suggested that the PWSCC growth behavior of strain-hardened Alloy 690 not only depends on the dislocation density, but also on the microstructural defects at the GB.

• 한국지반공학회논문집
• /
• 제24권12호
• /
• pp.113-120
• /
• 2008

1차원 지반응답해석은 지반에 의한 지진동의 증폭현상을 모사하는 데 널리 사용되고 있다. 가장 널리 사용되고 있는 등가선형 지반응답해석기법은 유효변형률에 상응하는 전단탄성계수와 감쇠비를 전 주파수 영역에 일률적으로 적용하며, 진동주파수에 대한 지반 응답의 영향을 고려하지 않는다. 지반의 비선형 거동을 주파수영역에서 보다 정확하게 모사하기 위하여 진동주파수와 지반거동의 상관관계를 주파수-변형률 곡선으로써 모의하는 등가선형해석기법이 개발되었으며, 이 방법은 기존의 등가선형해석기법에 비하여 정확성을 향상시킨다고 알려져 있다. 이제까지 다양한 형상의 주파수변형률 곡선이 제안되었으며, 이들은 한결같이 해석의 정확성을 증가시킨다고 주장된 바 있다. 본 연구에서는 기존의 연구에서 제안되었건 두 개의 주파수-변형률 관계 완화곡선과 본 연구에서 새롭게 제안된 세 개의 곡선을 이용하여 주파수 의존성을 고려한 등가선형해석기법의 정확성을 검증하였다. 검증에는 세 개의 부지에서 기록된 6개의 지진파가 사용되었다. 해석결과, 완화곡선은 지반응답에 지배적인 영향을 미치는 것으로 나타났으며, 주파수 의존성을 고려한 해석은 정확성을 향상시킬수 있는 것으로 나타났다. 하지만, 모든 사례에서 가장 정확하게 응답을 예측하는 완화곡선은 없는 것으로 나타났으며, 해석사례별로 최적의 완화곡선이 다른 것으로 나타났다. 따라서, FDEL 해석 수행 시, 다양한 완화곡선을 사용해야 할 것으로 판단되며 등가선형해석과 병행해서 수행되어야 한다고 판단된다.