• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.10-20
• /
• 2013

To evaluate the safety of a beam structure, strains are measured as an indicator of structural states. However, unless strain sensors are installed exactly on where maximum or other representative strains occur, the techniques by which rational assessment through measured strains is accomplished are required. Thus, this study suggests a process to estimate strain distribution on the steel beam from discrete strains measured by sensors. In the presented technique, the targeted beam is regarded to be subjected to unknown loads so that applicability is enhanced. Final strain distribution is given as form of a function after regression analysis. To verify the performance of estimation, a bending test for steel beam on which distributed and concentrated loads simultaneously act is conducted. From the comparison between estimated and directly measured strains in the test, the curve of strain distribution and the strain at arbitrary location could be predicted within maximum relative error 3.32% and maximum absolute error of $2.32{\mu}{\varepsilon}$, respectively. Thus reliable and practical monitoring is expected to apply effectively for the steel beam structure.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.6
• /
• pp.57-67
• /
• 2008

Two test methods, nonrepetitive plate loading test (NPLT) and repetitive plate loading test (RPLT) are being used to control the quality of compaction through the evaluation of the stiffness of subgrade soils in the Korea railway industry. Subgrade reaction modulus ($k_{30}$) from the NPLT and strain modulus ($E_v$) from the RPLT are the index values to check them. The methods have similar aspects, but they differ in the modulus evaluation method, the numbers of loading stage, termination procedures, etc. This paper analyses the differences of the two test methods and evaluates the relationship between subgrade reaction modulus and strain modulus. In order to develop the relationship, total 22 tests were performed including the NPLT and the RPLT at the 6 original grounds, and 5 upper or lower subgrades in Kyungbu High Speed Railway II stage construction sites. According to the soil conditions, the relationship between subgrade reaction modulus and strain modulus was proposed with corrections by considering strain states, mean confining pressures, and Poisson's ratio.

• Korean Journal of Veterinary Research
• /
• v.40 no.3
• /
• pp.533-541
• /
• 2000

Biochemical and genetic analysis were carried out to investigate the potential recovery of pathogenecity or related mutations of Brucella abortus RB51 vaccine strains. RB51 strains were recovered from commercial vaccines, including related seed stocks from private companies in Republic of Korea, strain from USA, a reference strain from C university and a field isolate (Daehungjin) from aborted dairy cow after RB51 vaccination were compared with two identified virulent wild strains (S2308 and a field strain isolated from dairy cow in Korea) at the same conditions. All the strains examined, except identified pathogenic strains, revealed the identical characteristics to the original RB51 in biochemical properties, antigen and bacteriophage typing. Outer membrane protein (OMP) profiles from strains of RB51 showed the same patterns with standard RB51 in SDS-PAGE. In addition, Western blotting with the brucella specific monoclonal antibody also indicated that all the vaccine strains were completely deficient in their LPS compared to the pathogenic Br abortus strains. The differences in DNA structures among strains were also possible to detect after PCR. All vaccine strains, except S19, S1119-3, S1075, S544 and Br suis, were amplified a 178bp DNA fragment of eri-gene, and 364bp of IS711 elements. In contrast, 498bp DNA product was only found with Br abortus. Overall evidences in the present study confirmed that the RB51 strains for vaccine production in Korea did not originated from the phenomena of possible recovery of pathogenicity or related to any potential mutation event at all.

• Journal of Theoretical and Applied Mechanics
• /
• v.3 no.1
• /
• pp.45-65
• /
• 2002

A constitutive model on oorthotropic thermo-elasto-viscoplasticity for fiber-reinforced composite materials Is illustrated, and their thermomechanical responses are predicted with the fully-coupled finite element formulation. The unmixing-mixing scheme can be adopted with the multipartite matrix method as the constitutive model. Basic assumptions based upon the composite micromechanics are postulated, and the strain components of thermal expansion due to temperature change are included In the formulation. Also. more than two sets of mechanical variables, which represent the deformation states of multipartite matrix can be introduced arbitrarily. In particular, the unmixing-mixing scheme can be used with any well-known isotropic viscoplastic theory of the matrix material. The scheme unnecessitates the complex processes for developing an orthotropic viscoplastic theory. The governing equations based on fully-coupled thermomechanics are derived with constitutive arrangement by the unmixing-mixing concept. By considering some auxiliary conditions, the Initial-boundary value problem Is completely set up. As a tool of numerical analyses, the finite element method Is used with isoparametric Interpolation fer the displacement and the temperature fields. The equation of mutton and the energy conservation equation are spatially discretized, and then the time marching techniques such as the Newmark method and the Crank-Nicolson technique are applied. To solve the ultimate nonlinear simultaneous equations, a successive iteration algorithm is constructed with subincrementing technique. As a numerical study, a series of analyses are performed with the main focus on the thermomechanical coupling effect in composite materials. The progress of viscoplastic deformation, the stress-strain relation, and the temperature History are careful1y examined when composite laminates are subjected to repeated cyclic loading.

• Structural Engineering and Mechanics
• /
• v.45 no.4
• /
• pp.471-494
• /
• 2013

In this paper, identification of isotropic and orthotropic linear elastic material constitutive parameters has been demonstrated by a FEA-free energy-based inverse analysis method. An important feature of the proposed method is that it requires no finite element (FE) simulation of the tested material. Full-field displacements calculated using digital image correlation (DIC) are used to compute DIC stress fields enforcing the equilibrium condition and DIC strain fields using interpolation functions. Boundary tractions and displacements are implicitly recast into an objective function that measures the energy residual of external work and internal elastic strain energy. The energy conservation principle states that the residual should be zero, and so minimizing this objective function inversely identifies the constitutive parameters. Synthetic data from simulated testing of isotropic materials and orthotropic composite materials under 2D plane stress conditions are used for verification of the proposed method. When identifying the constitutive parameters, it is beneficial to apply loadings in multiple directions, and in ways that create non-uniform stress distributions. The sensitivity of the parameter identification method to noise in both the measured full-field DIC displacements and loadings has been investigated.

• Korean Journal Plant Pathology
• /
• v.13 no.1
• /
• pp.5-12
• /
• 1997

Genetic diversity of forty-four strains of Xanthomonas campestris pv. vesicatoria from diverse geographic origins was investigated using random amplified polymorphic DNA (RAPD) of genomic DNA. One hundred and thirty-seven amplified fragments were produced by polymerase chain reaction with a set of 14 random primers, and the sizes of amplified DNA fragments ranged approximately from 0.3 to 3.2 kb. Cluster analysis of genetic similarity among the strains generated the dendrogram that clearly separated all strains from each other. The 44 strains of X. campestris pv. vesicatoria were classified into 4 major genomic DNA RAPD groups and 15 subgroups at the genetic similarity of 0.60 and 0.92, respectively. The strains from foreign countries formed discrete subgroups, but the United States strain 87-77 clustered closely with some of Korean strains together. Thirty-nine Korean strains were classified into 11 subgroups, and especially Masan strain Ms93-1 clustered distinctly far from the other Korean strains. RAPD polymorphism suggests strongly the occurrence of genetic differentiation of X. campestris pv. vesicatoria and the existence of genetically distinctive subgroups among the populations in Korea.

• Korean Journal of Veterinary Research
• /
• v.55 no.1
• /
• pp.53-56
• /
• 2015

Bovine leukemia virus (BLV) is the causative agent of enzootic bovine leukosis. This study was conducted to clarify the molecular characteristics of BLVs obtained from a specific region in Korea. Proviral BLVs were detected in anti-BLV antibody-positive blood samples by PCR. Env and gag fragments were sequenced and compared to previously published reference sequences. Analysis of the env gene sequence revealed that the YI strain was highly similar to genotype 1, including United States and Japanese strains. The gag gene sequence had the highest degree of similarity with a Japanese strain.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.61-70
• /
• 2000

When clay foundations of embankments are treated with vertical drain, essentially, the strain occurs to vertical direction but the water flow is radial. The initial horizontal permeability and its variation with the vertical compression are key parameters for the choice of the type of drains, their spacing, and affect to the cost of the project. In this study, CRS consolidation test is performed to investigate the anisotropic characteristics of decomposed mudstone soil and direct permeability test is performed on the same specimens. The results of testing show that Ch is larger than Cv. specially, the Cv - $\sigma$v relationship for a soil sample is viewed from three different curve segments corresponding to overconsolidated, transition and normally consolidated states. The anisotropic ratio, rk(kh/kv) is 2.19. Coefficient of permeability in normally consolidated state is related to its void ratio and permeability parameter n. C can be determined from a linear plot of log[k(1+e)] versus log e. The slope, n, of graphs is the same, whereas the vertical intercept, log C, seems to vary somewhat for anisotropic.

• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.74-84
• /
• 2003

Objective : We investigated association between excessiveness and deficiency of the visceral and twelve merdians and low back pain, by checking Yangdorak. Methods : Clinical studies were done 62 patients who were treated with low back pain to Dept. of Acupuncture & Moxibustion, Hospital of Oriental Medicine in Semyung University from August 2, 2002 to August 20, 2002. We divided low back pain patients into lumbar vertebra strain, herniated nucleous pulposus(H.N.P.) degenerative spondylosis(D.J.D) and tested the potentiality of skin resistance(Yangdorak) to them. Results: 1. H.N.P. groups were more than another groups in comparing with the States over Physiological Limits and the and excessiveness of merdians. 2. In degenerative spondylosis groups, excessiveness of the F3(kidney) was to be superior. In H.N.P. groups deficiency of the H5(triple energiger) was to be superior. In lumbar vertebra strain groups, deficiency of the H5(triple energiger) and excessiveness of the F2(Liver) was to be very superior. Conclusions: We could investigate the relationship of the excessiveness and deficiency of the visceral and twelve merdians to low back spain patients by checking Yangdorak. Specially, Deficiency of the H5(triple energiger) and H4(Small intestine) may be helpful in diagnosis H.N.P..

• Korean Journal of Veterinary Research
• /
• v.46 no.4
• /
• pp.363-370
• /
• 2006

Porcine reproductive and respiratory syndrome (PRRS) is an economically important disease of swine that occurs all over the swine industry worldwide. It was first observed in the Unite States in 1987 then in Europe in 1990. It has been described in Japan and in Korea in 1993. PRRS virus is divided into two distinct types, North American and European, genetically. Based on our limited knowledge there has been no report on the existence of European PRRSV. But according to the government's Korea Customs Service there has been many importations of breeding pigs from Europe. These seem to make an estimate that European PRRSV could be introduced in Korea by inflow of European breeding pigs. We first detected the European PRRSV could be introduced in Korean pig farms by using polymerase chain reaction (PCR). Further, it is also identified that there are not only North American PRRSV antibody but also a European PRRSV antibody. According to the genetical and serological experiment results, the presence of established North American PRRSV in Korea is due to the use of live vaccines made of North American PRRSV strain as well field virus infection, and the European PRRSV is possibly introduced from imported breeding stock.