• Asian-Australasian Journal of Animal Sciences
• /
• 제16권3호
• /
• pp.430-434
• /
• 2003

In vivo antagonistic effect of Lactobacillus helveticus CU 631 and Lactobacillus spp. against typical enteritis causing pathogen Salmonella enteritidis KU 101 have been determined, which showed an increase in survival rate and the decline in viable cell numbers of pathogen in liver and spleen at sacrifice. A signifcant difference in the antagonistic effect against KU 101 were observed, which was species and/or strain dependent of Lactobacillus (p<0.01), the survival rate of the mice in the Salmonella infection by feeding L. helveticus CU 631 has been shown to be 157%, whereas those of L. rhamnosus GG ATCC 53103, L. acidophilus ATCC 4356, L. johnsonii C-4 were 137%, 132%, 119% respectively on the basis of lactobacilli non-associated control KU101 fed mice to be 100%. Viable cells of S. enteritidis KU101 in the liver and in the spleen at sacrifice were decreased in Lactobacillus spp. fed group with no significant difference. The higher level of total secretory IgA concentration in the intestinal fluid of lactobacilli fed mice than control mice have been observed. In vitro antagonistic activity of Lactobacillus spp. against KU101 have been determined, a prominent antagonistic activity of CU 631 against KU 101 were demonstrated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 2006

Mg alloys have drawn a huge attention in the field of transportation and consumer electronics industries since it is the lightest alloy which could be industrially applicable. Most Mg alloy components have been fabricated by casting method. However, there have been a lot of research activities on the wrought alloys and their plastic forming process recently. The deformation behavior of an AZ31 Mg alloy at the elevated temperature was examined firstly to find out the optimum plastic forming range in terms of temperature and strain rate. During high temperature deformation, AZ31 alloy is usually undergone the dynamic recrystallization which influence the deformation behavior in turn. In the present study, the effect of deformation on dynamic recrystallization of an AZ31 alloy was investigated to clarify the relation between the deformation and recrystallization. In an AZ31 alloy system, the dynamic recrystallization was found to occur continuously. Recrystallized grain size was dependent on the stress level.

• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.170-176
• /
• 2014

본 연구에서는 알칼리활성 황토콘크리트의 응력-변형률 관계에 대한 화학적 침식의 영향을 평가하였다. 배합의 주요변수는 물-결합재비와 공기량이다. 알칼리활성 황토콘크리트의 응력-변형률 관계는 재령 28일 이후 침지일이 0, 7, 28, 56 및 91일일 때 측정하였다. 실험결과를 기반하여, 화학적 침식하에서 감소된 알칼리활성 황토콘크리트의 압축강도 모델이 제시되었다. 또한, 화학적 침식하에서 알칼리활성 황토콘크리트의 응력-변형률 관계는 공기량과 화학용액에 침지된 일수에 현저한 영향을 받았는데, 침지일수에서 탄성계수의 저하는 동일한 압축강도 저하비율에 비해 더 컸다. 결과적으로 CEB-FIP 기준의 예측모델은 화학적 침식하에서 측정된 응력-변형률 관계와 잘 일치하지 않았다.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.343-349
• /
• 2009

Inhibitory effect of Escherichia coli O157 adhered to Caco-2 cells by the cells of Lactobacillus plantarum K11 and the cell-free culture supernatant (CFCS) and bacteriocin prepared from this strain was investigated. As the cell counts of viable L. plantarum K11 previously adhered to Caco-2 were increased, the rate of adhesion and adherent cell counts of E. coli O157 was lower. However, because the heated L. plantarum K11 rarely have the adhesion ability to Caco-2, the adhesion rate and adherent cell counts of E. coli O157 were high. In addition, the inhibitory effects of E. coli O157 adhesion by the CFCS and bacteriocin of L. plantarum K11 were dose-dependent manner. Therefore, the inhibition of adhesion of E. coli O157 to Caco-2 may result from the antimicrobial substances such as lactic acid and bacteriocin. Moreover the inhibitory activity of adhesion by the heated bacteriocin for 30 min at 100oC was similar to activity of non-treated bacteriocin, but the activity was disappeared by treatment with protease.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.466-473
• /
• 2022

The effect of Cr and Mo contents on the hydrogen embrittlement of tempered martensitic steels was investigated in this study. After the steels with different Cr and Mo contents were austenitized at 820 ℃ for 90 min, they were tempered at 630 ℃ for 120 min. The steels were composed of fully tempered martensite with a lath-type microstructure, but the characteristics of the carbides were dependent on the Cr and Mo contents. As the Cr and Mo contents increased, the volume fraction of film-like cementite and prior austenite grain size decreased. After hydrogen was introduced into tensile specimens by electrochemical charging, a slow strain-rate test (SSRT) was conducted to investigate hydrogen embrittlement behavior. The SSRT results revealed that the steel with lower Cr or lower Mo content showed relatively poor hydrogen embrittlement resistance. The hydrogen embrittlement resistance of the tempered martensitic steels increased with increasing Mo content, because the reduction in the film-like cementite and prior austenite grain size plays an important role in improving hydrogen embrittlement resistance. The results indicate that controlling the Cr and Mo contents is essential to achieving a tempered martensitic steel with a combination of high strength and excellent hydrogen embrittlement resistance.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.141-147
• /
• 2016

Staphylococcus aureus cultures exposed to rotating magnetic field (RMF) were studied in order to analyse the possible induced changes in staphylococcal enterotoxin genes (se) expression. Liquid cultures of S. aureus strains carrying different se were exposed to the RMF of magnetic frequency 50 Hz and magnetic induction 34 mT for 10 h at $37^{\circ}C$. Three time points of bacterial growth cycle were considered for RNA extractions. Gene expression analyses were evaluated using real-time quantitative PCR method. The present study confirmed, that the RMF can stimulate the growth rate of S. aureus cultures in comparison to the unexposed controls, while the stimulation is not strain dependent. The studies have also shown, that the RMF, depending on the exposure time but regardless the bacterial strain, can influence on the expression of various se. In general, except for sea, as a result of bacterial exposure to the RMF through subsequent growth phases, the expression of se decreased, reaching the values below results recorded for unexposed controls. In the case of sea expression remained at a lower level as compared to the control, regardless the time of exposition.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.190-200
• /
• 1991

본 연구에서는 고온에 노출되는 열-점소성 거동의 해석을 위해 소성유동, 크 리프, 응력풀림(stress relaxation)등의 거동을 동시에 다룰 수 있는 통일구성방정식 모델에 대해 논하고 적절한 모델을 선정한다. 이 모델은 미소변형이론에 근거한 것 이므로 구조물의 거동을 소변형률(small strain)과 소회전(small rotation)의 범위내 로 가정하여 해석한다.선정된 모델에 대해서 시간변화율 형태의 방정식으로부터 유 한요소법을 통한 수치화와 사용된 구성방정식을 효율적으로 처리할 수 있는 수치해석 법상의 알고리듬을 제안한다. 제안된 알고리즘을 사용하여 유한요소법 전산코드를 적상하고, 작성된 코드를 이용하여 고온에서 하중을 받는 단순보와 국부적으로 심한 가열을 받는 구조물에 적용하여 고전적인 구성방정식으로 복합적인 해석이 어려웠던 열-점소성 거동을 효과적으로 해석할 수 있음을 보인다. 본 논문은 응력해석에 주안 점을 두었으므로 열해석에 관한 상세한 논의는 가급적 생략하기로 한다.

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.37-44
• /
• 2007

Mechanical and thermomechanical properties of the bulk metallic glass (BMG) are so unique that the deformation behavior is largely dependent on the temperature and the strain rate. Impacting behavior of NiTiZrSiSn bulk metallic glass powder during kinetic spraying was investigated in this study. Considering the impact behavior of the BMG, the kinetic spraying system was modified and attached the powder preheating system to make the transition from the inhomogeneous deformation to the homogeneous deformation of impacting BMG particle easy BMG splat formation is considered from the viewpoint of the adiabatic shear instability. It is suggested that the impact behavior of bulk metallic glass particle is determined by the competition between fracture and deformation. The bonding of the impacting NiTiZrSiSn bulk amorphous particle was primarily caused by the temperature-dependent deformation and fracture (local liquid formation) behavior.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.535-548
• /
• 2015

A series of experimental results on thin mild steel plates clamped at the boundary subjected to gas detonation shock loading are presented. Detonation occurred by mixing Acetylene (C2H2)-Oxygen (O2) in various volume ratio and different initial pressure. The applied impulse is varied to give deformation in the range from 6 mm to 35 mm. Analytical modeling using energy method was also performed. Dependent material properties, as well as strain rate sensitivity, are included in the theoretical modeling. Prediction values for midpoint deflections are compared with experimental data. The analytical predictions have good agreement with experimental values. Moreover, it has been shown that the obtained model has much less error compared with those previously proposed in the literature.

• Journal of Microbiology and Biotechnology
• /
• 제8권4호
• /
• pp.412-415
• /
• 1998

The accumulation process of $Pb^{2＋}$ in an industrial strain of Saccharomyces cerevisiae proved to be temperature-dependent, and was quite similar to chemical adsorption at the initial stage of $Pb^{2＋}$accumulation. The initial $Pb^{2＋}$ accumulation rate increased from 11.4 to 46.2 mg $Pb^{2＋}$/g cell dry weight/day, in response to the increased temperature from $20^{\circ}C\;to\;50^{\circ}C$ while the maximal $Pb^{2＋}$ accumulation amount (175.8 mg $Pb^{2＋}$/g cell dry weight) was achieved at $30^{\circ}C$. The maximal $Pb^{2＋}$/ accumulation amount with temperature was independent of ion exchange with $K^＋\;and\;Mg^{2+}$.