• 제목/요약/키워드: Strain Concentration

검색결과 1,671건 처리시간 0.027초

Numerical simulation of elastic-plastic stress concentration in fibrous composites

  • Polatov, Askhad M.
    • Coupled systems mechanics
    • /
    • 제2권3호
    • /
    • pp.271-288
    • /
    • 2013
  • In the present study an elastic-plastic strain analysis is carried out for fibrous composites by using numerical modeling. Application of homogeneous transversely-isotropic model was chosen based on problem solution of a square plate with a circular hole under uniaxial tension. The results obtained in this study correspond to the solution of fiber model trial problem, as well as to analytical solution. Further, numerical algorithm and software has been developed, based on simplified theory of small elastic strains for transversely-isotropic bodies, and FEM. The influence of holes and cracks on stress state of complicated configuration transversely-isotropic bodies has been studied. Strain curves and plasticity zones that are formed in vicinity of the concentrators has been provided. Numerical values of effective mechanical parameters calculated for unidirectional composites at different ratios of fiber volume content and matrix. Content volume proportions of fibers and matrix defined for fibrous composite material that enables to behave as elastic-plastic body or as a brittle material. The influences of the fibrous structure on stress concentration in vicinity of holes on boron/aluminum D16, used as an example.

Isolation and Characterization of Plant Growth Promoting Rhizobacteria From Button Mushroom Compost

  • Oh, Sung-Hoon;Lee, Chang-Jung;Yoon, Min-Ho
    • 농업과학연구
    • /
    • 제43권1호
    • /
    • pp.100-108
    • /
    • 2016
  • An auxin-producing bacteria (strain 5-1) was isolated from button mushroom compost in Boryeong-Si, Chungcheongnam-Do. The 5-1 strain was classified as a novel strain of Enterobacter aerogenes based on chemotaxonomic and phylogenetic analyses. The isolated E. aerogenes 5-1 was confirmed to produce indole-3-acetic acid (IAA), one of the auxin hormones, using TLC and HPLC analyses. When the concentration of IAA was assessed by performing HPLC quantitative analysis, a maximum concentration of IAA of $109.9mgL^{-1}$ was detected in the culture broth incubated in R2A medium containing 0.1% L-tryptophan for 24 h at $35^{\circ}C$. Acidification of the culture was deemed caused by an increase of IAA because a negative relationship between IAA production and pH was observed. Supplementation with a known precursor of IAA production, L-tryptophan, appeared to induce maximal production at 0.1% concentration, but it reduced production at concentrations above 0.2%. To investigate the growth-promoting effects to crops, the culture broth of E. aerogenes 5-1 was used to inoculate water cultures and seed pots of mung bean and lettuce. In consequence, adventitious root induction and root growth of mung bean and lettuce were two times higher than those of the control.

탄소강 배관 재료의 DSA 거동에 미치는 노치 영향 평가 (Evaluation of Notch Effect on the Dynamic Strain Aging Behavior of Carbon Steel Piping Material)

  • 이사용;김진원;김홍덕
    • 대한기계학회논문집A
    • /
    • 제36권3호
    • /
    • pp.275-282
    • /
    • 2012
  • 본 연구에서는 탄소강 배관 재료의 동적변형시효 거동에 미치는 노치에 의한 응력과 변형 집중 효과를 파악하기 위해서, 표준 시편과 노치 시편을 이용하여 다양한 온도와 시험 속도에서 인장시험을 수행하였다. 또한, 시편의 형상에 따른 응력과 변형률 상태의 차이를 파악하기 위해서, 각 시편에 대한 유한요소 시뮬레이션을 수행하였다. 노치 시편을 이용한 인장시험 결과에서도 표준 시편에서 관찰된 것과 같은 동적변형시효의 증거인 serration과 인장강도의 증가 현상이 관찰되었다. 동일한 시험 속도에서 인장시험이 수행된 경우에 표준 시편에 비해 노치 시편에서 동적변형시효 현상이 고온에서 나타났다. 유한요소 해석 결과에 의하면 표준 시편에 비해 노치 시편에서 동적변형시효가 고온에서 나타나는 것은 노치부에서 응력과 변형의 집중으로 인한 높은 변형률 속도에 기인하는 것으로 확인되었다.

Sulfate Reduction for Bioremediation of AMD Facilitated by an Indigenous Acid- and Metal-Tolerant Sulfate-Reducer

  • Nguyen, Hai Thi;Nguyen, Huong Lan;Nguyen, Minh Hong;Nguyen, Thao Kim Nu;Dinh, Hang Thuy
    • Journal of Microbiology and Biotechnology
    • /
    • 제30권7호
    • /
    • pp.1005-1012
    • /
    • 2020
  • Acid mine drainage (AMD) has been a serious environmental issue that threatens soil and aquatic ecosystems. In this study, an acid-tolerant sulfate-reducing bacterium, strain S4, was isolated from the mud of an AMD storage pond in Vietnam via enrichment in anoxic mineral medium at pH 5. Comparative analyses of sequences of the 16S rRNA gene and dsrB gene involved in sulfate reduction revealed that the isolate belonged to the genus Desulfovibrio, and is most closely related to Desulfovibrio oxamicus (with 99% homology in 16S rDNA sequence and 98% homology in dsrB gene sequence). Denaturing gradient gel electrophoresis (DGGE) analyses of dsrB gene showed that strain S4 represented one of the two most abundant groups developed in the enrichment culture. Notably, strain S4 was capable of reducing sulfate in low pH environments (from 2 and above), and resistance to extremely high concentration of heavy metals (Fe 3,000 mg/l, Zn 100 mg/l, Cu 100 mg/l). In a batch incubation experiment in synthetic AMD with pH 3.5, strain S4 showed strong effects in facilitating growth of a neutrophilic, metal sensitive Desulfovibrio sp. strain SR4H, which was not capable of growing alone in such an environment. Thus, it is postulated that under extreme conditions such as an AMD environment, acid- and metal-tolerant sulfate-reducing bacteria (SRB)-like strain S4 would facilitate the growth of other widely distributed SRB by starting to reduce sulfate at low pH, thus increasing pH and lowering the metal concentration in the environment. Owing to such unique physiological characteristics, strain S4 shows great potential for application in sustainable remediation of AMD.

ESPI System을 이용하여 측정한 국부 변형률이 저사이클 피로수명에 미치는 영향에 관한 연구 (Effect of Local Strain on Low Cycle Fatigue using ESPI System)

  • 김경수;김기성;권정민;박성모;김범일
    • 대한조선학회논문집
    • /
    • 제43권2호
    • /
    • pp.213-219
    • /
    • 2006
  • Low cycle fatigue cracks are mainly detected at discontinuous welded locations with high stresses under repeated cyclic static loads due to cargo leading and unloading. Theoretical and analytical methods have been used for evaluation of local stress and strain which have an effect on a prediction of fatigue life, but those have difficulties of considering stress concentration at notched location and complicated material behavior of welded joint or heat affected zone. Electronic speckle pattern interferometry(ESPI) system is nondestructive and non-contact measurement system which can get the relatively accurate full field strain at critical positions such as welded zone and structural discontinuous location. In this study, local strain was measured on welded cruciform joint by ESPI system and then low cycle fatigue test was performed. Effect of local strain on low cycle fatigue life was examined by measured values using ESPI system. Moreover, experimental fatigue life was compared with established S-N curves using theoretical local strain and stress calculated by Neuber's rule.

Steinernematid와 Heterorhabditid 선충의 쥐며느리에 대한 비효용적결과 (Noneffective Results of Steinernematid and Hoterorhabditid Nematodes Agains Pill bug, Armadillidium vulgare (Isopoda : Armadillidae))

  • 추호렬;이동운;허은영;김준범
    • 한국응용곤충학회지
    • /
    • 제35권1호
    • /
    • pp.91-93
    • /
    • 1996
  • Steinernematid와 heterorhabditid 선충은 쥐며느리에 침입하여 치사시킬수는 있었지만 효과는 없었다. Steinernema carpocapsae 포천 strain과 S. glaseri 동래 strain이 S. carpocapse All strain과 Heterorohabditis bacteriophora보다 효과가 있었으며, 병원성 발현에서 선충의 접종농도가 기주의 밀도보다 중요한 요인이었다.

  • PDF

토양으로부터 분리한 유화성 생체계면활성 균주의 배양 특성 (Characteristics of Culture for Emulsive Biosurfactant-Strain from the Soil)

  • 임윤택;윤용수
    • 환경위생공학
    • /
    • 제11권3호
    • /
    • pp.69-77
    • /
    • 1996
  • The result of isolated and selected to the strain having the emulsifying activity from soil's strain the strain was identified as Candida genus. The strain was investigated with culture condition at pH culture temperature, flow rate of air, strring rate etc., and physicochemical properties of the biosurfactant were examined. The optimum composition of medium for a strain cultivation were obtained as follow : glucose ; 100g/L, yeast extract ; 10g/L, urea ; 1.0g/L, KH$_{2}$PO$_{4}$ ; 50mg/L, MgSO$_{4}$ ; 500mg/L, and the op condition of cultivation was as follow : pH ; 3.0, temperatlue ; 24$\circ $C, strring rate ; 40rpm. The maximum yield of biosurfactant was obtained by pH ; 3.0-3.5, and temperature ; 25$\circ $C. The degree of emulsification of syntesized biosurfactant was increased clearly by increasing concentration of biosurfactant and it's stability was maintained for a long time. The surface tension of biosurfactant was varied with pH, especially it was showed that the surface tension was high at acidic pH.

  • PDF

시효한 Mg-5%Sn 합금의 경도와 진동감쇠능 변화 (Changes in Hardness and Damping Capacity of Aged Mg-5%Sn Alloy)

  • 전중환
    • 열처리공학회지
    • /
    • 제35권5호
    • /
    • pp.255-261
    • /
    • 2022
  • In this work, the strain-amplitude independent and strain-amplitude dependent damping capacities of Mg-5%Sn alloy have been investigated as a function of its age-hardening response. The hardness increased with an increase in aging time, reached a peak value after 48 h, and then it gradually decreased. The damping capacities of the Mg-5%Sn alloy exhibited a decreasing tendency in the order of solution-treated, under-aged, peakaged, and over-aged states in the strain-amplitude dependent region, whereas they increased continuously with aging time in the strain-amplitude independent region. The microstructural examination during aging revealed that the lower concentration of Sn solutes in the α-(Mg) matrix and the lower density of the Mg2Sn precipitate particles may well be the crucial factors for better damping values in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

Hydrogen Production by Biological Processes

  • Shin Jong-Hwan;Park Tai Hyun
    • 한국미생물학회:학술대회논문집
    • /
    • 한국미생물학회 2004년도 International Meeting of the Microbiological Society of Korea
    • /
    • pp.101-104
    • /
    • 2004
  • Among biological hydrogen production processes, fermentative processes have some advantages. In this research, the hydrogen producing bacterium was isolated from domestic landfill area and identified as Enterobacter sp. The strain was named Enterobacter sp. SNU-1453. Important parameters for the hydrogen process include pH, temperature, concentration of initial glucose, and kind of sugars. The pH of the culture medium significantly decreased as fermentation proceeded due to the accumulation of various organic acids, and this inhibited the $H_2$ production seriously. When pH was controlled at pH 7.0, hydrogen production was 2614.5 m1/1 in 17 hours. The increase of glucose concentration resulted in higher $H_2$ production. The productivity of this strain was 6.87 mmol $H_2/l$ per hi on concentration of 25g glucose/l. Enterobacter sp. SNU-1453 could utilize various sugars. These results indicate that Enterobacter sp. SNU-1453 has a high potential as a fermentative $H_2$ producer.

  • PDF

Production of Poly(3-hydroxybutyrate) [P(3HB)] with High P(3HB) Content by Recombinant Escherichia coli Harboring the Alcaligenes latus P(3HB) Biosynthesis Genes and the E. coli ftsZ Gene

  • Choi, Jong-Il;Lee, Sang-Yup
    • Journal of Microbiology and Biotechnology
    • /
    • 제9권6호
    • /
    • pp.722-725
    • /
    • 1999
  • Filamentation-suppressed recombinant Escherichia coli strain harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes and the E. coli ftsZ gene was constructed and cultivated for the production of poly(3-hydroxybutyrate) [P(3HB)] with high concentration and high content. By the pH-stat fed-batch culture of this recombinant E. coli strain XL1-Blue(pJC5), the final cell concentration and P(3HB) concentration obtained in 44.25h were 172.2g cell dry weight/l and 141.9g P(3HB)/l, respectively, resulting in productivity of 3.21g P(3HB)/l-h. More importantly, the P(3HB) content obtained was 82.4 wt %, which was significantly higher than that obtained with the recombinant E. coli harboring only the PHA biosynthesis genes.

  • PDF