• Journal of Fashion Business
• /
• v.13 no.4
• /
• pp.178-190
• /
• 2009

The purpose of this study is to make reference for geometric fashion by investigating geometric patterns by linear types and to propose high value added print and fashion design by designing and producing geometric prints and apparel with them focusing on digital textile printing. As a method of the study, visual and textural data were investigated for theory of geometric pattern and fashion design samples were illustrated. The geometric pattern could be defined as abstract pattern which was crossed with straight line or curve. We could group it into three classes such as straight linear, curved, and mixed type. Images varied with linear types. The image of straight linear type was sharp and modern, that of curved one was soft and feminine and that of mixed one was gorgeous and artistic. And then, 3 geometric prints and 3 one-pieces were designed. The concept of design was simple optimism which was based on sixties. Target was young optimistic women group from the mid teens to the mid twenties who continued to seek after their unique individuality keeping their modern lifestyle. Geometric patterns with straight linear, curved, and mixed type were designed and dresses which went well with them were designed and produced. According to the result of this study, images of geometric fashion can be represented diversely by varying linear type, digital textile printing is good method for high value added geometric fashion because of its high quality and degree of sensitivity, and geometric pattern is a good source for contemporary fashion.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.78-85
• /
• 2007

In this study, we performed finite element analysis for the design of a medical centrifuge and two-types of centrifuge were compared with each other. The types of centrifuge are 2-arm straight type and 3-arm type. Structural analysis was done with respect to the change of the rotational speed of the rotor of a centrifuge. When the rotor of centrifuge was rotated, the von Mises stress of 2-arm straight type-rotor was compared with the von Mises stress of 3-arm type. The margin of safety was estimated from the result. We found the critical speed of centrifuge from the campbell diagram by modal analysis.

• The Research Journal of the Costume Culture
• /
• v.6 no.4
• /
• pp.13-25
• /
• 1998

This study focuses on the visual effects of various neckline-haristyle combinations on the perception of face image and type. The study employed a model with oval face and examined 35 combinations made up of five necklines and seven hairstyles. Looking at various face images depending upon different necklines, in case of round, V, boat square, and high necklines, long wave hair and medium wave hair produced a feminine image of marked individuality; long straight hair that covers the forehead and medium straight hair gave an image of charm and purity as well as an image of neatness; and long straight hair short cut hair showed an intellectual image. Regarding the perceptual type of face depending upon the different necklines of round, V, square, and high, the long straight hair covering the forehead and medium wave hair had the effect of an optical illusion that made the face look short and round; and short cut hair made the face line look distinct and the face look oval and slender.

• Restorative Dentistry and Endodontics
• /
• v.5 no.1
• /
• pp.41-46
• /
• 1979

Silver amalgam has superior mechanical and physical properties, therefore it has been widely used in dental clinics. But we have found the silver amalgam failures frequently, its important reasons are fracture, fallen-out, tarnish, corosion and secondary caries etc. The author studied the compressive strength of silver amalgam. The author made the standardized specimen, prepared the Black's Class II cavity on chromecobalt alloy, and placed the three types of Unitek$^{(R)}$ pin (Type of pins are straight type, "ㄱ" bent type, "$\sqcap$" bent type pin. The compressive strength was measured by (Dynamic Strain Meter Shinko Co. Japan). The author took the following results by comparing with the control group, not used pin. 1) Compressive force of silver amalgam in straight type pin was $187.11{\pm}39.00kg$, $252.98{\pm}31.91kg$ in "ㄱ" type bent pin, $189.00{\pm}37.46Kg$ in "$\sqcap$" type bent pin, $172.33{\pm}28.07Kg$ in the control group. 2) The statistic significance of the compressive strnegth between each group showed that "ㄱ" type, bent pin is stronger than the control group or straight type pin. 3) There were no difference of significances between the control group and straight type pin, control group and "ㄱ" type bent pin and "$\sqap$" type bent pin, "ㄱ" type' bent pin "$\sqcap$" and type bent pin.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.432-440
• /
• 2002

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth there radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal. A line was drawn connecting these two points extending through the crown of the tooth. The point at which the line crossed the external crown surface was recorded as facial, incisal, lingual. Degree of root curvature was determined by Schneider Protractor Method. Both section method and clearing method were used in this study. By section method, 100 mandibular incisors were embedded in clear resin and transeverse serial sectioned at 0.5, 1.0, 2.0, 3.0, 4.0, 5.0mm level from root apex. The resected surfaces were stained by methylene blue and examined under $\times$40 magnification with a stereomicroscope. By clearing method, 100 mandibular incisors were cleared in methysalicylate after decalcification with 10% nitric acid and evaluated under $\times$18 magnification with a stereomicroscope. The results were as follows ; 1. 29% had the center of the plotted straight-line access facial to incisal edge, whereas 71% had straight-line access at the incisal edge. When incisal wear classified as extensive, the straight-line access was plotted on the incisal edge 95.5%. When incisal wear classified as slight/none, the straight-line access was plotted on the facial 65.9%. 2. Degree of curvature of main canal was straight or almost straight, and only 10% in buccolingual direction had a degree of curvature greater than 20 degrees and 5.5% in mesiodistal direction had. 3. In section method, canal configuration analysis showed that 51% of the specimen classified as type I, 27% as type II, 12% as type III, 10% as type IV. For theses setions with two canals, the incidence of an isthmus was 36.7%, 64.3%, 79.2%, 96.3%, 97.4%, 97.6% at each level and highest in 3~5mm sections. 4. In clearing method, canal configuration analysis showed that 74% of the specimen classified as type I, 11% as type II, 6% as type III, 9% as type IV. These results suggested that traditional access from lingual should be moved as far toward the incisal as possible to locate and debride the lingual canal and root canal system should be cleaned, shaped completely and obturated three dimensionally for successful endodontic treatment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.8
• /
• pp.1233-1241
• /
• 2010

This study analyzes the body characteristics of high school boys according to 3 different body types in order to improve the fit of upper garments. First, among the lateral body types, the straight body type was selected from the SizeKorea 3D scanned data and 2D measurement data. Second, high school boys (classified as straight lateral body type) were grouped into type B, A, and Y drop groups. The percentages of type B, type A, type Y are 17.8%, 48.1%, 32.1% respectively. The characteristics of the body types were analyzed. While the bust circumference were the same among the three body types (chest width, back width, back across shoulder, and bust width did not show a significant difference); however, waist and hip measurements showed a significant difference among the three body types. Third, the height of the high school boys ranged between 165cm and 180cm and the bust circumference between 85cm and 97cm. For the bust size categories, type B and type Y are distributed similarly; however, type A is distributed in the smaller bust size categories.

• The Research Journal of the Costume Culture
• /
• v.9 no.5
• /
• pp.770-782
• /
• 2001

The definite objects of this study are as follows; 1. The study presents the methods of the designing collar pattern and bodice pattern by each concrete object after comparing and analyzing the factors among the features which are in need of clothes designing. 2. The object of this study is to make body-suitable ready-made clothes by comparing and analyzing the methods of designing collar pattern and bodices pattern presented by each concrete objects and Bunka Pattern. The results of this study are as follows; 1 . The results of this study developed the body-suitable bodice pattern of bend-forward type, straight type and lean-back type Compared with the Bunka pattern by physical function test, this study was rated high in the aspects of the shape of neck and shoulder. 2. The collar pattern was designed according to each type. The front center rising point of straight type is 2.5cm, lean-back type is 3.0cm and bend-forward type is 1.5cm. Compared with the Bunka pattern by physical function test, this study is rated high in the aspects of the shape. To confirm the increase and change of the measure definitely, the complete examination of each subject is necessary. This developed and investigated pattern must be supplemented more by comparing and analyzing with other pattern and body types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.485-493
• /
• 1992

Three kinds of tight skirts, slim type, straight type, and semi-tight type were investigated to obtain necessary information about the size of the back slit. Fourteen college students put on these experimental clothes and walked on the flat floor, going up and down the stairs. The dimensions of the back slit were measured by width and length. The stride length was taken from the record of footprints of walking. The correlation between the body measurement, stride length and the size of the back slit was studied. As a result of this experiment, the findings are as follows: 1. The size of the back slits differed from each skirt type at the level of p<0.001. In the case of walking on the floor, the average dimension of the back slit was 14.0 cm long 5.0 cm wide for the slim type,9.5 cm long 2.8 cm wide for the straight type and 2.1 cm long 0.5 cm wide for the semi-tight type. 2. In the case of walking on the stairways, the average dimension of the back slit was 16.0 cm long 5.8 cm wide for the slim type, 12.4 cm long 3.9 cm wide for the straight type and 3.1 cm long 1.1 cm wide for the semi-tight type. 3. The correlation between the height (stature, waist height, knee height) and the size of back slit was 0.3 to 0.6. The correlation between the girth (waist, hip) and the size of back slit was 0.3 to -0.5. 4. The correlation between the stride length and the size of back slit was 0.76 for the slim skirt, 0.56 for the straight skirt, 0.28 for the semitight skirt.

• Journal of the Korean Society of Costume
• /
• v.54 no.2
• /
• pp.149-165
• /
• 2004

In this study, the photographic and anthropometric measurements of men in the 20's were made. and pattern making professionals visually evaluated their side photos to classify lateral views. These data were analyzed by being compared with existing research results to select objective standards, and body types were classified according to the selected standard. In addition, body features were defined according to lateral views based on measurement items and indices, and standard lines and determining factors for visual evaluation which determines lateral views were revealed. Back length - front length size smaller than 1.5cm was named as the lean-back type, 1.5∼3.9cm was named as the straight type. and that larger than 3.9cm was named as the bend-forward type. In the straight type, the bisection point of waist depth was located at a similar place to tragion level vertical line. In the lean-back type, the point was at the front of tragion level vertical line. In the bend-forward type, the point was at the back of tragion level vertical line.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.4
• /
• pp.12-18
• /
• 2012

This study was performed to found out the deviations for clamp-on type ultrasonic flowmeter installed in downstream of valves. It was selected three types of two-path flowmeter mainly used for K-water as test. Experiment carried out to confirmed characteristics of deviation depending on the sensor location, straight pipe length and maker for 1-path, 2-path and 4-path combined 2-path flowmeter. It was selected two kinds of valves with 100 % and 50 % opening, butterfly valves and gate valves, for flow disturbance factor. Finally, we suggested number of sensors by maker, straight pipe length and installed location of sensors satisfying the tolerance depending on the experiment results.