Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Stress and Modal Analysis for the Rotor System of a Medical Centrifuge using Finite Element Method

유한요소법을 이용한 의료용 원심분리기 로터의 응력 및 고유치 해석

  • 김성민 (건국대학교 의학공학부) ;
  • 양인철 (건국대학교 일반대학원 신기술융합학과) ;
  • 김도균 ((주)한랩 기술개발연구소) ;
  • 김학철 ((주)한랩 기술개발연구소)
  • Published : 2007.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, we performed finite element analysis for the design of a medical centrifuge and two-types of centrifuge were compared with each other. The types of centrifuge are 2-arm straight type and 3-arm type. Structural analysis was done with respect to the change of the rotational speed of the rotor of a centrifuge. When the rotor of centrifuge was rotated, the von Mises stress of 2-arm straight type-rotor was compared with the von Mises stress of 3-arm type. The margin of safety was estimated from the result. We found the critical speed of centrifuge from the campbell diagram by modal analysis.

Keywords

References

  1. Seo, Y. G., 'Development of Design Technique for Centrifuge,' Industrial-Academic Joint Work Final Report, Dong-A Univ., 2002
  2. Park, J. K., Kim, Y. H. and Ha, S. K., 'Optimal Design of Ultracentrifuge Composite Rotor by Structural Analysis,' J. of the KSPE, Vol. 15, No. I, pp. 130-136, 1998
  3. Han, G. J., Lee, S. W., Shim, J. J., An, D. S., Ahn, C. W., Suh, Y. K. and Kim, T. H., 'Stress and Vibration Analysis with respect to the change of the shape of Screw Blade and the Hole for Centrifuge,' J. of the KSPE, Vol. 20, No.9, pp. 118-125, 2003
  4. Gere, J. M. and Timoshenko, S. P., 'Mechanics of Materials,' forth edition, Thomson Learning, pp. 3-43, 2001
  5. Timoshenko, S. P. and Goodier, J. N., 'Theory of Elasticity,' McGraw-Hill, pp. 80-83, 1982