• Journal of Korean Neurosurgical Society
• /
• v.47 no.2
• /
• pp.128-133
• /
• 2010

Objective : The secondary verification of Leksell Gamma Knife treatment planning system (LGP) (which is the primary verification system) is extremely important in order to minimize the risk of treatment errors. Although prior methods have been developed to verify maximum dose and treatment time, none have studied maximum dose coordinates and treatment volume. Methods : We simulated the skull shape as an ellipsoid with its center at the junction between the mammillary bodies and the brain stem. The radiation depths of the beamlets emitted from 201 collimators were calculated based on the relationship between this ellipsoid and a single beamlet expressed as a straight line. A computer program was coded to execute the algorithm. A database system was adopted to log the doses for $31{\times}31{\times}31$ or 29,791 matrix points allowing for future queries to be made of the matrix of interest. Results : When we compared the parameters in seven patients, all parameters showed good correlation. The number of matrix points with a dose higher than 30% of the maximal dose was within ${\pm}\;2%$ of LGP. The 50% dose volume, which is generally the target volume, differs maximally by 4.2%. The difference of the maximal dose ranges from 0.7% to 7%. Conclusion : Based on the results, the variable ellipsoid modeling technique or variable ellipsoid modeling technique (VEMT) can be a useful and independent tool to verify the important parameters of LGP and make up for LGP.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.309-319
• /
• 1999

This study was conducted to get forest scenic beauty management information toward forest working systems; characteristics in Larix forest stands. 35 different alternatives were simulated to visualize on basis of actual forest working methods. The options were illustrated as photos produced by computer software. Each alternatives were evaluated by 3 groups with total 593 respondents after reliability test. Visual preference evaluation was used 1 - 10 point rating scale. The ratings were scaled using SBE analysis program of RMRATE. To compare the relationship of visual preference and image scale, Spatial images of 13 thinning alternatives were measured by Semantic differential scale. In general, the respondents preferred refreshing and ordering forest stand after forest working to natural forest stand before forest working. Visual preference decreased with the increasing intensity of bare ground area and slash area in forest stand. And also, visual preference was high related to tree density, clear length of stem, and ground vegetation. Farm line of small clear cutting area was preferred straight line to curve line. Visual preferences were significant differences in certain socioeconomic variables of the respondents. Results indicate how to conduct forest working system for forest scenic beauty management.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.332-335
• /
• 2009

A new cultivar of Rosa hybrida 'Loving Heart' was developed by crossing Gyeongkyo R-6 and 'Noblesse' at Gumi Floricultural Experiment Station in 2002. Characteristics trials were conducted three times from 2004 to 2007. This cultivar showed dark pink flower color (RHS, Red-purple group 66-B) and standard type with good flower shape. The flower diameter is 10.3cm and the number of petals per flower is 55. Vase life of 'Loving Heart' could be as long as 12.3days. The yield of 'Loving Heart' was $127stems/m^2/year$. 'Loving Heart' has good quality of cut flower and strong vigor in plant growth. This cultivar has straight stems and is easy to culture because of a few prickles on the top of stem. This cultivar is appropriate for both soil and solution(hydroponics) cultures.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.193-193
• /
• 2022

Cowpea(Vigna unguiculata L. Walp) has a low fat and protein content and a relatively high starch content, so it is mainly used in various ways for song-pyeon sediment, rice-cake paste, and porridge. In Yeonggwang-gun, Jeollanam-do, cowpea for seed production is being cultivated for the localization of raw material for Rice cake with ramie leave. A cowpea variety 'Jang-Alchan' was improved from the cross between IT145373 and IT145391 at the JARES in 2019. 'Jang-alchan' has an erect plant with an intermediate plant habit, light purple-colored corolla, and heart-shaped leaflets. 'Jang-alchan' has an orange-yellow seed seed-surface of faint luster, and brown and straight pods when matured. The stem length of 'Jang-alchan' was 48cm, 9cm longer than that of the control cultivar 'Okdang' and the 100-seed weight was 14.1g. The weight ratio of the seed coat for the entire seed was 11.2%, which was 0.2%p lower than that of the control cultivar. Field resistance of 'Jang-alchan' to leaf and systemic diseases was similar to that of the control cultivar. Is field resistance of 'Jang-alchan' to lodging was slightly lower than that of the control cultivar. The average yield of 'Jang-alchan' was 1.85ton per hectare, which was 14% higher than that of the control cultivar 'Okdang', 'Jang-Alchan' does not require the installation of an espalier-net and is taller than the existing supplied 'Okdang', so it can be harvested by combine harvesting. In addition, it is expected to contribute to the localization of raw material grains for regional specialties as it can be cultivated over a large area.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.51-51
• /
• 2022

Water dropwort (Oenanthe stolonifera DC.) is a perennial herbaceous plant that grows wild throughout Korea. As of 2020, 24,819 tons (51.7% of open field, 48.3% of facility) are produced in 1,278 ha (59.9% of open field, 40.1% of facility) nationwide. Water dropwort, which is rich in nutrients such as vitamins and iron, is mainly cultivated by vegetative propagation method using local traditional species, however, seed propagation and breeding of cultivars are insufficient so far. Since securing, propagating and continuous characterization of various genetic resources are required to breed new cultivars, this study was conducted to compare the main characteristics of domestic genetic resources and to improve their utilization. Growth characteristics such as plant height, fresh weight, plant type, and flowering date were investigated for the 89 varieties of genetic resources owned by Jeollabuk-do Agricultural Research and Extension Services after vegetative propagation in the individual pots. Also, the morphological image information of leaves and flowers was constructed. Genetic resources were collected nationwide and originated in 30 regions including Hwaseong, Siheung and Jeju. Their plant types could be classified into straight, intermediate and creeping types according to their morphological characteristics, and at this time, the number of intermediate types accounted for the largest proportion. Flowering was carried out under high-temperature and long-day conditions in summer. According to the flowering date, they could be classified into early, middle and late flowering varieties, and at this time, the middle flowering varieties occupied the largest proportion. As a result of the investigation of vegetative growth characteristics, varieties with long plant height, heavy fresh weight and thick stem thickness were identified. Along with this result, it is thought that classification and selection of genetic resources for various purposes will be possible through additional investigations such as analysis of components and antioxidant activity. Moreover, it is judged that such results can be used as basic data for breeding new water dropwort cultivars in the future.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.196-204
• /
• 1990

Pinus densiflora is not only widely distributed but also one of the most economically important timber species in Korea. In Korea, this species is classified into four local forms according to tree forms, as it has widely geographical variations. Trees of Ankang form are dwarfish nearly like shrubs, and those of Keumkang form are very tall and straight. Those of flatland and highland forms are exhibited in-between Ankang and Keumkang forms. This study was carried out to examine biomass, net production and production efficiency among four local forms of Pirzus densiflora forests growing in Korea. For the study, dimension analysis was used for trees and harvest method for shrubs and herbs in four 30-40 year-old stands showing the typical tree forms. Stand biomass of Ankang, flatland, highland and Keumkang forms were 29.87, 110.89, 133.53 and 205.42 t/ha, respectively. As going in order of Ankang, flatland, highland and Keumkang forms, the proportions of stem woods to total tree biomass increased while the proportions of stem barks, live branches, needles and roots showed a tendency to decrease. Stand net productions of Ankang, flatland, highland and Keumkang forms were 3.716, 10.796, 13.097 and 16.500 t/ha yr., respectively. As going in order of Ankang, flatland, highland and Keumkang forms, the proportions of stem woods and lire branches to total tree net production increased while the proportion of needles decreased. In case of live branches, the opposite trend of biomss and net production proportion may be resulted from the differences in the ratio of self-pruning. Net assimilation ratios of Ankang, flatland, highland and Keumkang forms were 1.406, 1.920, 1.487 and 1.677, respectively. Efficiency of needles to produce stems in those forms were 0.239, 0.714, 0.572 and 0.771, respectively. Considering the difference in measuring time, net assimilation ratio and efficiency of needles to produce stems may increase as going in order of Ankang, flatland, highland and Keumkang forms.

• Journal of Korean Society of Forest Science
• /
• v.78 no.2
• /
• pp.119-131
• /
• 1989

This experiment was executed to investigate and compare qualitative and quantitative anatomical features in compression wood, opposite wood, and side wood formed in a bent stem, a straight branch, and an exposed horizontal root of Korean red pine(Pinus densiflora S. et Z.). The respective four discs containing compression wood taken at 20cm interval both in stem and branch as well as a disc containing well developed compression wood from horizontal root were analyzed. Percentage of compression wood and eccentricity showed decreasing tendency with the increasing distance in height direction of stem and length direction of branch. The qualitative anatomical features of compression wood appeared to differ from those of side and opposite wood in very gradual tracheid transition from earlywood to latewood, roundish tracheid shape on cross surface, tracheid distortion at tip on radial surface, existence of intercellular space, and helical cavity in tracheid wall. And the differences in these qualitative features among the compression wood, opposite wood, and side wood became less intensive with the decreasing trends in percentage of compression wood and eccentricity. The quantitative anatomical features in compression wood also appeared to be wider in that respective widths of fusiform and uniseriate ray than those of opposite and side wood, but the heights of fusiform and uniseriate ray in compression wood were smaller than in opposite and side wood. The number of horizontal resin canal(fusiform ray) and uniseriate ray, however, showed no differences among the compression wood, opposite wood, and side wood. And the number of vertical resin canal in unit area, $4{\pi}mm^2$ of compression wood was fewer than that in opposite wood, whereas numerous vertical resin canals contained in a growth ring. These rays of compression wood seemed to be characterized by smaller height and wider width than those of opposite and side wood.

• Journal of Embryo Transfer
• /
• v.31 no.3
• /
• pp.281-285
• /
• 2016

Cluster-of-differentiation antigen 9 (CD9) gene expressed in the male germ line stem cells is crucial for sperm-egg fusion, and was therefore selected as a candidate gene to investigate Duroc boar semen motility and kinematic characteristics. This study was performed to investigatetheir association with semen motility and kinematic characteristics. DNA samples from 96 Duroc pigs with records of sperm motility and kinematic characteristics [Total motile spermatozoa (MOT, $82.27{\pm}5.58$), Curvilinear velocity(VCL, $68.37{\pm}14.58$), Straight-line velocity(VSL, $29.06{\pm}6.58$), the ratio between VSL and VCL(LIN, $47.36{\pm}8.42$), Amplitude of Lateral Head displacement(ALH, $2.88{\pm}0.70$)] were used in present study. A single nucleotide polymorphism (g.358A>T) in intron 6 was associated with MOT, VCL, VAP and ALH in Duroc population (p<0.05). Therefore, we suggest that the porcine CD9 may be used as a molecular marker for Duroc boar semen quality, although its functional effect was not clear yet. These results will improve the understanding of the functions of the CD9 in spermatogenesis within the reproductive tracts, and will shed light on CD9 as a candidate gene in the selection of good sperm quality boars.

• Journal of Embryo Transfer
• /
• v.30 no.2
• /
• pp.109-114
• /
• 2015

Cryopreservation of boar semen is continually researched in reproductive technologies and genetic resource banking in breed conservation. For evaluating the boar semen quality, sperm motility (MOT) is an important parameter because the movement of spermatozoa indicates active metabolism, membrane integrity and fertilizing capacity. Various researches have been trying to improve the quality of semen post-thawed in boar. Recently, polymorphism (g.358A>T) of cluster-of-differentiation antigen 9 (CD9) gene reported to be significant association with MOT. Also, CD9 gene was expressed in the male germ line stem cells is crucial for sperm-egg fusion, and was therefore selected as candidate gene for boar semen. This study was conducted to evaluate the pig SNP (g.358A>T) of CD9 gene as a positional controlling for semen parameters of post-thawed boar semen. To results, the g.358A>T SNP of the CD9 gene was significantly associated with the traits such as MOT, curve linear velocity, straight line velocity, average path velocity and amplitude of lateral head displacement. Particularly, the g.358A>T SNP significantly has the highest association with MOT and animals with AA genotype (p<0.001). Therefore, we suggest that the g.358A>T in the intron 6 region of the porcine CD9 may be used as a molecular marker for Duroc boar Post-thawed semen quality, although its functional effect was not defined yet.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.10-16
• /
• 2018

Lindera erythrocarpa is a less utilized species in Korea although that it has straight stem and it grows up to 40 cm in diameter. A proper kiln-dry schedule is required in advance to utilize an unknown species. Terazwa's quick oven-dry method was used to find it and which was confirmed by drying 25 mm thick boards in a kiln. The average green moisture content and the average green specific gravity of Lindera erythrocarpa are 72.3% and 0.53, respectively. Prospective kiln-drying conditions obtained by Terazwa's quick oven-dry method are a initial dry-bulb temperature of $50^{\circ}C$, a initial wet-bulb depression of $4^{\circ}C$ and a final dry-bulb temperature of $75^{\circ}C$, which are in a good agreement with USDA FPL kiln-dry schedule of T5-D4. 25 mm thick boards dried in a kiln with T5-D4 kiln-dry schedule did not have any severe drying defects such as honycombing and warping. A severer kiln-dry schedule of T8-C5 was developed and applied to another kiln-drying run to confirm it.