• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.291-298
• /
• 2002

Recently, construction of reinforced concrete tall buildings is widely increased according to the improvement of material quality and design technology. Therefore, differential shortenings of columns due to elastic, creep, and shrinkage have been an important issue. But it has been neglected to predict the Inelastic behavior of RC structures even though those deformations make a serious problem on the partition wall, external cladding, duct, etc. In this paper, analysis system for prediction and compensation of the differential column shortenings considering time-dependent deformations and construction sequence is developed using the objected-oriented technique. Developed analysis system considers the construction sequence, especially time-dependent deformation in early days, and is composed of input module, database module, database store module, analysis module, and analysis result generation module. Graphic user interface(GUI) is supported for user's convenience. After performing the analysis, the output results like deflections and member forces according to the time can be observed in the generation module using the graphic diagram, table, and chart supported by the integrated environment.

• Journal of Global Scholars of Marketing Science
• /
• v.11
• /
• pp.1-19
• /
• 2003

Typicality is usually defined as the degree to which an item is perceived to represent a category. Typicality has been a important subject in consumer behavior because it is related closely with brand preference, awareness and top of mind. The past studies about typicality have focused on brand and store in off-line environment. At the point of time internet shopping mall industry becomes mature, we can expect that most internet users are accustomed to it. So the study about typicality of internet shopping mall is timely. The antecedents and outcomes of typicality of internet shopping mall are mainly studied in this paper. Also, I investigated the influence of the type of internet shopping mall on typicality and the influence of typicality on preference and purchase intention. The followings are the results of this study. Firstly, frequency of exposure and attribute structure explained perceived typicality. Secondly, the type of internet shopping mall was found to be a moderator of the relationship between attribute structure and typicality. Thirdly, there is a positive correlation between typicality and preference. Finally, there is a positive correlation between typicality and purchase intention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1682-1694
• /
• 2007

There are a lot of factors working to facilitate the decline of Korea's traditional markets including large-scale discount stores, convenience stores, businesses of new types such as non-store retailing, and fiercer competitions among retail shops. The changes to the business environment are never favorable to them, either; the consumers have developed more diverse tastes and altered their purchasing styles; and the trading areas around traditional markets have withdrawn in size and power as new towns attract more businesses. In a word, every factor and situation seems to push traditional markets down the slope. Reacting to the problems, the Korean government enacted and enforced the "Special Law for the Promotion of Traditional Markets and Shopping Streets" to provide proper financial and management support. The shop owners of traditional markets formed merchants and prosperity associations and took various initiatives to increase the competitive edge of their traditional markets. All those efforts on the part of the government and the merchants, however, do not seem to be enough to revive traditional markets. This study set out to compare and analyze the management of shop owners of traditional markets based on the support projects by the government, to conduct an empirical research and analysis of their management conditions, and to suggest a better policy model by making improvements for the government's support system and making revisions to the current directions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.829-831
• /
• 2005

실시간 시스템이란 시간적인 제한을 가지고 작업 수행 결과의 정확도가 보장되는 시스템으로 경성 실시간 시스템과 연성 실시간 시스템으로 분류된다. 최근 분산 실시간 분야에서 새로운 패러다임으로써 폭넓게 활용되기 시작한 실시간 객체 모델인 TMO는 Kane Kim과 Kopetz에 의해 처음 제안되었다. TMO 모델은 경성 또는 연성 실시간 응용과 병렬 컴퓨팅 응용 프로그램에서 사용 될 수 있으며, 시스템의 기능적인 면과 시간 조건 수행 모두를 명확히 정의할 수 있다. TMO의 네트워크로 구성되는 실시간 분산 환경에서의 실행을 위해 몇 개의 TMO 실행 엔진이 개발 되었는데, 그 중에서 LTMOS라는 리눅스 기반의 연성 실시간 미들웨어 엔진이 한국외대 RTDCS lab.에서 개발되었다. 하지만 LTMOS의 실시간 시스템 수행 중 작업량의 과부하로 인한 deadline 위반이나, 시스템간의 분산 IPC 통신에 있어서 Channel Traffic이 빈번한 경우 실시간 시스템을 유지할 수 없다는 문제점들을 갖고 있다. 이러한 문제점들을 해결하고 조금 더 효율적인 실시간 시스템을 유지하기 위해서, TMO 프로그램의 resource 정보를 담고 있는 ODS(Object Data Store)만을 다른 노드에 있는 자신의 TMO 프로그램 Replica로 이주해서 실시간 로드 밸런싱을 구현하는 기법을 사용하였다. 이에 본 논문에서는 TMO 프로그램들의 deadline 위반 및 Channel Traffic 부하를 감지할 수 있는 Node Monitor와 최적의 노드를 선별할 수 있는 Migration Manager를 새롭게 추가하였고, 쓰레드들의 스케줄러인 WRMT에 이주 작업을 하기 위한 부가적인 기능을 구현하였다. 2D 이미지의 관측점을 줄여 계산량을 대폭 감소시키는 장점을 갖는다.것으로 조사되었으며 40대 이상의 연령층은 점심비용으로 더 많은 지출을 하고 있는 것으로 나타났다. 4) 끼니별 한식에 대한 선호도는 아침식사의 경우가 가장 높았으며, 이는 40대와 50대에서 높게 나타났다. 점심 식사로 가장 선호되는 음식은 중식, 일식이었으며 저녁 식사에서 가장 선호되는 메뉴는 전 연령층에서 일식, 분식류 이었으며, 한식에 대한 선택 정도는 전 연령층에서 매우 낮게 나타났다. 5) 각 연령층에서 선호하는 한식에 대한 조사에서는 된장찌개가 전 연령층에서 가장 높은 선호도를 나타내었고, 김치는 40대 이상의 선호도가 30대보다 높게 나타났으며, 흥미롭게도 30세 이하의 선호도는 30대보다 높게 나타났다. 그 외에도 떡과 죽에 대한 선호도는 전 연령층에서 낮게 조사되었다. 장아찌류의 선호도는 전 연령대에서 낮았으며 특히 30세 이하에서 매우 낮게 조사되었다. 한식의 맛에 대한 만족도 조사에서는 연령이 올라갈수록 한식의 맛에 대한 만족도는 낮아지고 있었으나, 한식의 맛에 대한 만족도가 높을수록 양과 가격에 대한 만족도는 높은 경향을 나타내었다. 전반적으로 한식에 대한 선호도는 식사 때와 식사 목적에 따라 연령대 별로 다르게 나타나고 있으나, 선호도는 성별이나 세대에 관계없이 폭 넓은 선호도를 반영하고 있으며, 이는 대학생들을 대상으로 하는 연구 등에서도 나타난바 같다. 주 5일 근무제의 확산과 초 중 고생들의 토요일 휴무와 더불어 여행과 엔터테인먼트산업은 더욱 더 발전을 거듭하고 있으며, 외식은 여행과 여가 활동의 필수적인 요소로써 그 역할을 일조하고 있다. 이와 같은 여가시간의 증가는 독신자들에게는 좀더 많은 여유시간을 가족을

• Archives of design research
• /
• v.17 no.3
• /
• pp.167-178
• /
• 2004

The purpose of this treatise is to show merits and method of establishing Lotte department store design division Online Documents Communication System through illustration of examples of intranet in which internet environment convenient to use for its openness is applied for establishing Design Online Documents Communication System for fundamentals of organization. In this connection merits and effect attainable from establishing Design Outline Documents Communication System of the enterprise as found were as follows: Firstly, it brought about reduction in workload of staffs through sharing various existing resources. It reduced redundant works and enables speedy handling of works. Secondly, it was possible to exchange viewpoints and share information by pertinent parties. Thirdly, by expediting information exchange and communication among persons in charge it was possible to improve work efficiency. Fourthly, it was possible to build and operate such system at relatively low cost on the basis of web browser. Without using any other significant instrument or equipment but by linking it to business network and using existing computer system operation was possible. Fifthly, by common sharing of work exclusive to design room through on-line it was possible to improve professionalism and convenience in data preservation. Through this treatise and survey and study on process for establishing intranet it was possible to find that there were sharing work, improving work efficiency, reducing workload, saving cost and expediting communication to a significant degree.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.2
• /
• pp.86-100
• /
• 2015

Cloud computing is a computing term that evolved in the late 2000s, based on utility and consumption of computer resources. Google say that "Cloud computing involves deploying groups of remote servers and software networks that allow different kinds of data sources be uploaded for real time processing to generate computing results without the need to store processed data on the cloud. Cloud computing relies on sharing of resources to achieve coherence and economies of scale, similar to a utility (like the electricity grid) over a network. At the foundation of cloud computing is the broader concept of converged infrastructure and shared services. Cloud computing, or in simpler shorthand just "the cloud", also focuses on maximizing the effectiveness of the shared resources." The cloud service is a smart and/or intelligent service to save private files in any device, anytime, anywhere. Dropbox, OAuth, PAClous are required that the accumulated user's data are archives with cloud service. Currently we suggest an implementation technique to process many tasks to the cloud server with a thread pooling. Thread pooling is one of efficient implementating technique for client and service environment. In this paper, to present the implementation technique we suggest three diagrams in the consideration of software engineering.

• Journal of Wetlands Research
• /
• v.20 no.3
• /
• pp.210-218
• /
• 2018

It is very important to analyze water balance in the mountain wetland for the sustainable management of the wetland. In this study, the SWAT model was used to analyze the water balance of Janggun wetland located in Geumjeong mountain of Gyungnam province, Korea. The data such as rainfall and water level measured in Janggun wetland were used for water balance analysis and from the analysis we have known that the rainfall of 10mm within 8 days is required for maintaining an appropriate water level in Janggun wetland. Also, water balance analysis in the wetland for the period of 2009 to 2017 was performed by using hydro-meteorological data obtained from Yangsan weather station which is located around Janggun wetland. From the analysis results, we have known that the amount of rainfall was relatively small in 2010, 2012 and 2015 and water shortage was occurred in the wetland. Especially, water shortage was occurred during the summer that we had intensive rainfall for very short time and faster removal of the runoff from the wetland. Therefore, we may need extend water courses from a wetland watershed to the wetland for preventing land-forming of the wetland and also store water by banking up the wetland for preventing the decrease of water level in the wetland.

• Journal of KIISE:Software and Applications
• /
• v.29 no.7
• /
• pp.476-486
• /
• 2002

CBD(Component Based Development) has become the best strategical method for the business application. Because CBD is a new development paradigm which makes it possible to assemble the software components for application, it copes with the rapid challenge of business process and meets the increasing requirements for productivity. Since the business process is rapidly changing, CBD technology is the promising way to solve the productivity. Especially, the repository is the most important part for the development, distribution and reuse of components. In component repository, we can store and manage the related work-products produced at each step of component development as well as component itself. In this paper, we suggested a practical approach for repository construction to support and realize the CBD process and developed the CRMS(Component Repository Management System) as implementation product of the proposed techniques. CRMS can manage a variety of component products based on component architecture, and help software developers to search a candidate component for their project and to understand a variety of information for the component. In the paper, a practical approach for component repository was suggested, and a supporting environment was constructed to make CBD to be working efficiently. We expect this work wall be valuable research for component repository and the entire supporting Component Based Development Process.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.93-101
• /
• 2016

Purpose - As more consumers pursue high quality products at reasonable prices, Korean retail companies are increasing investment in expanding their outlet stores. Despite the growing importance of the outlet business, there has been very little empirical research on consumers' outlet shopping behaviors. This study aimed to investigate the relationships between consumers' perceived product value (performance quality, value for money, and social value) of outlet stores and overall shopping satisfaction and the effect of shopping satisfaction on outlet store loyalty. Research design, data and methodology - The authors developed a structural model in which performance quality, value for money, and social value of products are proposed to affect overall outlet shopping satisfaction, thus increasing customer loyalty. To analyze the research model, data were collected from 88 shoppers at suburban outlets. SPSS 21.0 and AMOS 21.0 were utilized to test the hypotheses. The unidimensionality of each construct was supported from the results of the reliability test with Cronbach's α and confirmatory factor analyses. Correlation analysis was performed and the results warranted the nomological validity of the measures. The fit statistics of the overall model analysis demonstrated an acceptable fit(X²(₁₆₁)=171.651, p=.000; X²/df=1.546; GFI=.821, NFI=.879, TLI=.942, CFI=.953, RMR=.035, RMSEA=.079). Results - The findings are as follows. First, consumers' perceived value of product performance quality had a significant positive effect on overall outlet shopping satisfaction. Consumers, who evaluate performance quality of the product more positively, tend to express stronger satisfaction and happiness about outlet shopping experience. Second, consumers' perceived social value of outlet products influenced their overall satisfaction significantly. Consumers who believe that products of outlet stores enhance self-concepts are more likely to satisfy with outlet shopping experience. However, consumers' perception of outlet products on value for money was not found to significantly influence overall shopping satisfaction. Finally, overall shopping satisfaction had a significant and positive influence on loyalty. Conclusions - While outlet retailers have traditionally focused on promoting competitively priced merchandise, the results of this study suggest that customers' overall satisfaction with outlet shopping is influenced more by the non-price-related product values. In the context of an outlet shopping environment, performance quality and social value of the products were found to be more critical predictors of customer overall satisfaction. Therefore, it would not be efficient for outlet retailers to highlight economic value of their merchandise. Instead, they need to investigate the performance quality of the products regularly and try to deliver quality guaranteed goods to enhance customer satisfaction. Also, outlet retailers should differentiate their businesses by carrying more unique and prestigious brands and emphasize higher social value and symbolic meanings of their products. As competition among outlet retailers are getting fierce, retail companies need to focus on strengthening customer loyalty with a long-term perspective. With a deeper understanding of the relationship between consumers' perceived product values and shopping satisfaction, outlet retailers will be able to develop customer loyalty strategies effectively and to achieve competitive advantage.

• Journal of Radiation Industry
• /
• v.9 no.4
• /
• pp.217-221
• /
• 2015

When reactor coolant leaks occur due to cracks of a steam generator's tube, radioactive materials contained in the primary cooling water in nuclear power plant are forced out toward the secondary systems. At this time the secondary water purification resin in the ion exchange resin tower of the steam generator blowdown system is contaminated by the radioactivity of the leaked radioactive materials, so we pack this in special containers and store temporarily because we could not dispose it by ourselves. If steam generator tube leakage occurs, it produces contaminated spent resins annually about 5,000~7,000 liters. This may increase the amount of nuclear waste productions, a disposal working cost and a unit price of generating electricity in the plant. For this reasons, it is required to develop a decontamination process technique for reducing the radioactive level of these resins enough to handle by the self-disposal method. In this research, First, Investigated the structure and properties of the ion exchange resin used in a steam generator blowdown system. Second, Checked for a occurrence status of contaminated spent resin and a disposal technology. Third, identified the chemical characteristics of the waste radionuclides of the spent resin, and examined ionic bonding and separation mechanism of radioactive nuclear species and a spent resin. Finally, we carried out the decontamination experiment using chemicals, ultrasound, microbubbles, supercritical carbon dioxide to process these spent resin. In the case of the spent resin decontamination method using chemicals, the higher the concentration of the drug decontamination efficiency was higher. In the ultrasound method, foreign matter of the spent resin was removed and was found that the level of radioactivity is below of the MDA. In the microbubbles method, we found that the concentration of the radioactivity decreased after the experiment, so it can be used to the decontamination process of the spent resin. In supercritical carbon dioxide method, we found that it also had a high decontamination efficiency. According to the results of these experiments, almost all decontamination method had a high efficiency, but considering the amounts of the secondary waste productions and work environment of the nuclear power plant, we judged the ultrasound and supercritical carbon dioxide method are suitable for application to the plant and we established the plant applicable decontamination process system on the basis of these two methods.