Abstract
Recently, construction of reinforced concrete tall buildings is widely increased according to the improvement of material quality and design technology. Therefore, differential shortenings of columns due to elastic, creep, and shrinkage have been an important issue. But it has been neglected to predict the Inelastic behavior of RC structures even though those deformations make a serious problem on the partition wall, external cladding, duct, etc. In this paper, analysis system for prediction and compensation of the differential column shortenings considering time-dependent deformations and construction sequence is developed using the objected-oriented technique. Developed analysis system considers the construction sequence, especially time-dependent deformation in early days, and is composed of input module, database module, database store module, analysis module, and analysis result generation module. Graphic user interface(GUI) is supported for user's convenience. After performing the analysis, the output results like deflections and member forces according to the time can be observed in the generation module using the graphic diagram, table, and chart supported by the integrated environment.
최근 사용재료의 품질과 설계기법의 향상으로 철근콘크리트 고층구조물에 대한 시공이 활발히 이루어지고 있다. 그러나 대부분의 경우에 시간의존적 비탄성변형을 무시하고 있다. 특히 시공단계에서 발생하는 초기변형은 장기적으로 구조물에 심각한 영향을 미칠 수 있다. 또한, 고층구조물에서 발생하는 부등축소는 탄성변형, 크리프, 건조수축 등이 조합되어 일어나기 때문에 고층구조물의 부등축소를 예측하고 실제 현장에서 보정하기 위해서는 장기거동에 대한 해석이 필수적이다. 본 연구에서는 동바리의 설치/제거를 포함한 실제적인 시공과정을 반영할 수 있는 2차원 골조해석 시스템을 개발하였다. 해석 시스템은 데이터베이스 설계기법과 그래픽 사용자 인터페이스(graphic user interface) 환경에서 개발되었으며, Input module, DB Strore module, Database module, Analytical module, Analysis result generation module로 크게 구성되어 있다. 해석 시스템은 시공단계별로 해석을 반복해석을 수행함으로써 발생하는 수많은 데이터와 정보를 데이터베이스 설계를 통해 효율적인 시스템 관리를 한다. Graphic user interface(GUI) 환경의 지원에 의해 사용자가 데이터의 입력, 수정, 검색 작업을 쉽게 할 수 있으며 해석결과를 그래픽 다이어그램(graphic diagram), 테이블(table), 차트(chart) 등으로 확인할 수 있다. 개발된 시스템은 거푸집과 동바리의 설치 및 제거를 포함하는 일반적인 시공단계를 고려할 수 있으며 기둥의 부등축소량을 예측할 수 있으며, 각각의 시공단계별로 발생하는 기둥의 부등축소량을 실제 실무에서 보정할 수 있도록 지원한다.