• Journal of Bio-Environment Control
• /
• v.1 no.1
• /
• pp.14-20
• /
• 1992

For the high quality and low cost agricultural crops in greenhouse cultivation, it is necessary to use natural energy as much as possible. In order to reduce the fossil fuel consumption and maximize the solar energy utilization in greenhouse heating, a latent heat storage material was developed as a relatively highly concentrative solar energy storage medium. And a solar energy-latent heat storage system was designed and constructed. The experimental research on greenhouse heating effect of the system was performed.

• Smart Media Journal
• /
• v.4 no.3
• /
• pp.62-67
• /
• 2015

The trend keywords in ICT sector will be Big Data, Internet of Things, and Cloud Computing. The rear end to support those techniques requires a large-capacity storage technology of low-cost. Therefore, we proposed the prototype of low-cost and mass distributed storage system based on PC using open-source Ceph FS for SMB.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.2
• /
• pp.169-175
• /
• 2001

Most of studies on automated storage/retrieval (AS/R) system assumed that storage capacity is given, although it is a very important decision variable in the design phase. We propose a simple algorithm to estimate the required storage capacity, i.e., number of aisles and number of openings in vertical and horizontal directions in each aisle, of an AS/R system under stochastic demand, in which storage requests occur endogenously and exogenously while the retrieval requests occur endogenously from the machines. Two design criteria, maximum permissible overflow probability and maximum allowable storage/retrieval (S/R) machine utilization, are used to compute the storage capacity. This model can be effectively used in the design phase of new AS/R systems.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1167-1170
• /
• 2007

This paper introduces a data storage transport protocol internet Advanced Technology Attachment (iATA) for ATA storage devices that can be accessed over (TCP/IP) networks. As the access speed of Advanced Technology Attachment (ATA) type storage is increasing, the importance of sharing the ATA type storages over internet is also increasing. We are proposing a protocol in which we have implemented the basic ATA command set to access the ATA type remote storage devices over the TCP/IP networks.In this paper, we give basic details of the protocol and discuss the existing storage protocols which are mainly used for accessing block storage like internet Small Computer System Interface (iSCSI) Hyper Small Computer System Interface (HyperSCSI) and ATA over Ethernet (AoE).

• Journal of Korea Spatial Information System Society
• /
• v.10 no.2
• /
• pp.1-12
• /
• 2008

Automatic semiconductor manufacture system generating transaction from 50,000 to 500,000 per a second needs storage management system processing very large data at once. A lot of storage management systems are researched for storing very large data. Existing storage management system is typical DBMS on a disk. It is difficult that the DBMS on a disk processes the 500,000 number of insert transaction per a second. So, the DBMS on main memory appeared to use memory. But it is difficultthat very large data stores into the DBMS on a memory because of limited amount of memory. In this paper we propose storage management system using insert transaction of a block unit that can process insert transaction over 50,000 and store data on low storage cost. A transaction of a block unit can decrease cost for a log and index per each tuple as transforming a transaction of a tuple unit to a block unit. Besides, the proposed system come cost to decompress all block of data because the information of each field be loss. To solve the problems, the proposed system generates the index of each compressed block to prevent reducing speed for searching. The proposed system can store very large data generated in semiconductor system and reduce storage cost.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.22-28
• /
• 2012

The purpose of this study was to show how tomaintain high efficiency and to use reasonably when being applied the cold-heat storage systems to the showcase. An experimental study was performed to manufacture the showcase system in a laboratory. Comparing the result at general operation condition with that of the new condition using ice storage system, this study showed the effects of the refrigerant sub-cooling, and with using inverter. Using ice storage system, the ice making process was operated during midnight being not needed the cooling of the showcase through the continuous running of the condenser unit. And then, the refrigerant was sub-cooled using the stored cold-heat after being discharged from the air cooling condenser during the day time. Through the experiments, the load transfer rate for the showcase using inverter and ice storage was estimated about 30.0%. And showed that the total power consumption of the showcase with inverter could be reduced about 37% than that of the showcase without inverter.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.1-5
• /
• 2020

The leakage accident from a storage tank in an oil refinery plant occurred in April 2014 and the total loss is KRW 18 billion. This accident has prompted many companies to develop their own mitigation system to minimize the loss of the leakage accident. The aim of this study is to design the temporary storage facility system for dealing with leakage accidents. The basic concept of this system is that the leakage fluid of a hazardous material flows into a temporary storage tank and this is transferred to a spare tank by a pump as avoiding the overflow of a temporary storage tank. In order to design this system, the leakage velocity and quantity according to time series should be evaluated. In addition, a proper pump capacity should be determined to avoid repeating the pump switching on and off frequently. In this study, the benzene tank is selected to verify the efficacy of this system. This study can play a critical role to provide a guideline for designing a new system.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.212-214
• /
• 2007

Regenerative energy which is generated during brake periods of DC traction might cause malfunction or destruction of rectifier or any other power conversion devices caused the increment of DC line voltage. Regenerative energy storage system using super-capacitor is one of the method to control the DC line voltage safely. And super-capacitor is very important device as energy storage device. Therefore, In this paper, we designed the regenerative energy storage system using super-capacitor and propose the method about predicting the lifetime of super-capacitor established in storage system. According to the this research, we can estimate the proper replacement moment for the existed super-capacitor due to the safety of the system. And improve the reliability of regenerative energy storage system using super-capacitor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.336-341
• /
• 2010

The burning interruption between the initiator and the delay column in a Zr-Ni K1 delay system used for a K510 fuze occurs with long-time storage. About 10 % failure probability of 15-years stored delay systems shows the failure mode in open literature. This paper shows storage lifetime improvement results for the delay system through changing the single-base delay column into double-base ones and controlling the manufacturing processes especially the initial inclusion of humidity. The double-base delay columns was implemented by inserting one delay column of fast burning rates between the initiator and the previous delay column of slow burning rates. Accelerated aging tests of the delay systems with double-base columns, and then the firing tests were performed to evaluate the improved lifetime. The double-base delay columns shows improved storage lifetime of the delay system through preventing the failure mode.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.4
• /
• pp.351-355
• /
• 2015

This paper explained the application of a lithium-ion battery energy storage system to electric propulsion ships. The power distribution in electric propulsion ships has low power quality because of the variation in the power consumption of the propulsion motor. For proper operation of the ship, the power quality needs to be improved, and the battery energy storage system is used to solve power-quality problems. The simulation models of electric propulsion ship and battery energy storage systems are constructed on MATLAB/Simulink to verify the improvement in power quality. The proposed system is applied in various scenarios of the propulsion motor state. The power quality achieved by using the battery energy storage system in both voltage and frequency satisfies the standards set by IEC-60092/101.