• 한국환경복원기술학회지
• /
• 제9권3호
• /
• pp.1-16
• /
• 2006

The purpose of this study is to develop design model of ecological park as stormwater storage facilities. The results are as follows : First, the design model of ecological park as stormwater storage facilities consider ecological and landscape characteristics such as high efficiency of land use, function as disaster prevention, ecological water purification, formation of habitat for flora and fauna. Second, this study demonstrates two types of plane structure and eight types of designed section. They can be combined and designed depending on conditions of each site. The facilities of stormwater storage conduct disaster prevention system and ecological park. Retention pond in stormwater storage facilities for ecological park also should be made for ecological restoration in the site. Third, the ecological park provide the basis for ecological network from in-site to out-site. Therefore its conservation and restoration plan consider the ecosystems of the site. Fourth, the most important factor for maintenance and management for retention pond is keeping water quality. Sustainable Structured wetland Biotop system is suggested for ecological water purification system in the retention pond which is one of the constructed wetland system using multi-celled aquatic plant and pond. This system can also provide habitat for animals and plants, water friendly park for men, and beautiful landscape.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.717-725
• /
• 2011

In the power system with an electric storage system that can increase utilization rate of the source of such new renewable energy, this paper introduces the approach on the daily unit commitment scheduling that determines simultaneously optimum operational condition and output of thermal generators and electric storage device. The unit commitment is one of the most important issues in economic operation and security of short-term operational plan of the power system. It is to determine on/off status of generator to minimize operational cost during the given period. The committed generator should satisfy various operational limitation such as estimated demand by system, spinning reserve condition within minimum operational cost. In order to determine on/off or charge/discharge/idle condition and output level of units and electric storage system, the MILP(Mixed Integer Linear Programming) is suggested. The proposed approach is the mixed method between LP(Linear Programming) and IP(integer programming) which seeks the value of real number and integer that maximize or minimize function objective within given condition. The daily unit commitment problem with the electric storage system is applied to MILP algorithm through linearization and formulation process. The proposed approach is applied to the test system.

• 한국주거학회논문집
• /
• 제5권2호
• /
• pp.99-108
• /
• 1994

The purpose of this study was to present basic data for better space plan of the apartment housing. It attempted to examine the possession and space usage of furniture and housing goods in three type floor plan. It also studied in relation to socidemographic variables and physical variables. The major findings were as follows :1) Housewife age, educational level, family income, number of family members were affected variables to the possession of housing goods and furniture except furniture possession to housewife age.2) It appeared similarity in the furnishing of housing goods and furniture in case of same floor plan.3) Generally, the space of living room was used often in furnishing of furniture and housing goods. 4) Linear arrangement of sofa set and corner arrangement of Anbang furniture are a tendency to get a effective space for activities in living room.5) The size of floor plan space was the most powerful variable to explain the possession and space usage of housing goods and furniture.6) The scarce of space result in pressing the household living space hard. The storage space should be planned and chosen after consideration of human factors according to the tastes, character of the users, and the space factors according to the composition of unit plan and the size of each living space. In case of the small size plan, particularly, it needed to the Built-in furniture as a effective method.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.361-368
• /
• 2009

In the Urban Regeneration Project, the scale becomes huge and the composition of participating organizations is complex. It is necessary to establish the master plan fast and effectively harmonize conflict options and interests in the early stage of the project. However, the master planner, who is tasked to establish the master plan, and the master planning team, are difficult to establish the master plan fast while effectively considering various and complex information related to regeneration. The Urban Regeneration Project is composed of various types of computer files like HWP, EXL, PDF, DWG and others. When the master plan is established, it is necessary to link the information items and physical files of urban generation in order to effectively save the files in storage for easy search and utilization. This study developed a prototype system to support participating subjects of the Urban Regeneration Projects. It will effectively utilize the information items in the physical computer files using information blocks and Metadata. The developed system provides the base to effectively manage large amount of documents in the early stage of the Urban Regeneration Project and make effective decision-making using the concept of data warehouse.

• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.295-303
• /
• 2015

지구 온난화 및 탄소배출권 저감을 위한 대안으로 에너지저장장치(ESS, Energy Storage System)의 중요성을 인식하고 ESS 산업육성을 위한 보급사업 및 인센티브 정책을 추진하고 있다. 우리나라는 2020년까지 ESS 누적 용량 2GW 보급을 추진하고 있다. 이러한 보급정책과 기업들의 기술개발에 따라 시장 확대로 인한 ESS의 배터리 가격이 점차 하락할 전망이다. 본 논문에서는 ESS 기술개발에 따른 ESS 가격 하락에 따른 ESS 보급량 추정을 하였으며, 이에 따라 발생하는 비용의 경제성 분석을 실시하였다. 또한 ESS 종류에 따라 발생할 수 있는 비용 및 ESS와 풍력전원의 연계에 따른 투자비용 분석을 하였으며, ESS보급에 따라 발생할 수 있는 전력판매수익 및 신재생에너지공급인증서 판매수익에 대한 경제성 분석을 실시하였다.

• 한국조경학회지
• /
• 제33권6호
• /
• pp.78-89
• /
• 2006

This study was conducted to analyze the planting structure and ecological characteristics of greon spaces on the grounds of e Dangjin steam power plant. To achieve these goals, we surveyed existing vegetation, plant community structure, Plant volume and growth rate. Based on e vegetation analysis, existing vegetation was classified into six types: herbaceous species $(70.54\%)$, evergreen coniferous trees $(21.17\%)$, deciduous broad-leaved trees $(5.10\%)$, deciduous coniferous trees $(1.47\%)$, shrubs $(0.12\%)$, and other types $(1.59\%)$. The coal storage, office, and playground areas were community is the natural forest area where a Pinus thunbergii / Pinus densiflora community is distributed in terms of vegetation structure, species diversity, plant volume, and growth rate. The artificial green spaces(near the coal storage, office, playground areas) had a single-layer structure. Species diversity indices of the artificial green areas were $0.1655\~0.4807$ compared to 0.8628 in the natural forest, which presented a good growth environment. Also, the plant volume in the artificial green space was lower than that of the natural green space. Therefore, it would be desirable to develope a multi-layer structure similar to that of the vegetation in the natural green space in order to improve the amount of plant volume. The plant-damage ratio of Pinus thunbergii was $52.48\%$ in the coal storage area, and $8.48\~ 11.52\%$, in the other survey areas. Also, the vitality of Pinus thunbergii was $15.45k{\Omega}$ in the coal storage areas, which indicates bad growing conditions. This suggests that soil characteristics and dust have a bad impact on growth. The investigation into deciduous tres' growth status showed that appropriate plants would be Albizzia julibrissin, Acer palmatum var. sanguineum, Acer palmatum, Malus spp., Prunus sargentii.

• 인터넷정보학회논문지
• /
• 제23권3호
• /
• pp.137-145
• /
• 2022

지하형 탄약고에 보관된 탄약의 물류는 저장공간의 특성상 지상에 보관된 탄약의 물류 보다 더 많은 어려움을 내포하고 있어, 이러한 문제점을 해결하여 지하형 탄약고의 물류를 향상 시키고자 본 연구를 실시하였다. 그래서 물류 개선을 위한 항목으로 경계, 안전, 환경, 물류체계, 장비설비, 수명관리 등 6개를 선정하였다. 그리고 AHP 기법으로 전문가들의 설문을 받아서 Expert Choice 프로그램으로 분석하였다. 분석 결과 안전, 경계, 수명관리, 장비설비, 물류체계, 환경 순으로 중요도가 높음을 확인하였다. 선정된 항목과 설문 결과를 토대로 지하형 탄약고에서 물류를 향상 시킬 수 있는 네트워크 기반 통합 플랫폼 구축 방안을 제시하였다. 본 연구는 향후 지하형 탄약고를 신축할 때 통합 플랫폼 구축을 위한 근거자료로 활용될 것이다. 본 연구는 군의 다른 물자를 저장하는 저장시설과 민간 기업의 대형 저장시설에서도 적용이 가능할 것으로 기대된다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.513-520
• /
• 2018

Since Paris Climate Change Conference in 2015, many policies to reduce the emission of greenhouse gas have been accelerating, which are mainly related to renewable energy resources and micro-grid. Presently, the technology development and demonstration projects are mostly focused on diversifying the power resources by adding wind turbine, photo-voltaic and battery storage system in the island-type small micro-grid. It is expected that the large-scaled micro-grid projects based on the regional district and town/complex city, e.g. the block type micro-grid project in Daegu national industrial complex will proceed in the near future. In this case, the economic cost or the carbon emission can be optimized by the efficient operation of energy mix and the appropriate construction of electric and heat supplying facilities such as cogeneration, renewable energy resources, BESS, thermal storage and the existing heat and electricity supplying networks. However, when planning a large residential town or city, the concrete plan of the energy infrastructure has not been established until the construction plan stage and provided by the individual energy suppliers of water, heat, electricity and gas. So, it is difficult to build the efficient energy portfolio considering the characteristics of town or city. This paper introduces an energy mix optimization(EMO) method to determine the optimal capacity of thermal and electric resources which can be applied in the design stage of the real large-scaled residential town or city, and examines the feasibility of the proposed method by applying the real heat and electricity demand data of large-scale residential towns with thousands of households and by comparing the result of HOMER simulation developed by National Renewable Energy Laboratory(NREL).

• 한국식품조리과학회지
• /
• 제24권5호
• /
• pp.652-664
• /
• 2008

In this study, a Hazard Analysis Critical Control Point (HACCP) plan was developed for the sanitary mass production of commercial Korean rice cake products (Gaepidduk, Injulmi, and Julpyon). The microbiological properties of manufacturing flow were evaluated in order to develop the HACCP Plan. The moisture contents of the rice cakes ranged between 36.2${\sim}$55.3%, whereas the water activity of all samples ranged between 0.954${\sim}$1.0. Microorganisms testing was conducted during various phases of the product flow of Korean rice cake preparation, and included assessments of food equipment, work environment, and cooking employees on a small scale. During the manufacture of Injulmi, Julpyon and Gaepidduk, CCPs were purchasing & storage, steaming and cooling, molding, and holding in the A and B manufactories. At the critical limit of CCPs, storage was conducted below at $5^{\circ}C$ in soybean powder, oil, and paste with redbeans. The steaming process was conducted above at $99^{\circ}C$ for 40 min. Cooling and holding processes were conducted for 2 hours below at $15^{\circ}C$. The molding process included sanitary education for foodhandlers and training for operators. Thus, certain prerequisite programs had to be implemented prior to the implementation of the HACCP system. High levels of bacterial contamination were detected in the aprons worn to work by some employees. Additionally, periodic sanitary education for foodhandlers and training for operators or managers was required. Cross contamination by materials was expected at the place where materials were processed or stored.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.770-774
• /
• 2006

The determination of feasible design flood is the most important to control flood damage in river management. Model parameters should be calibrated using observed discharge but due to deficiency of observed data the parameters have been adopted by engineer's empirical sense. Storage coefficient in the Clark unit hydrograph method mainly affects magnitude of peak flood. This study is to estimate the storage coefficients based on the observed rainfall-runoff events at the four stage stations in the Hantan river basin. Model calibration is the process of adjusting model parameter values until model results match historical data. An objective function which is the percent difference between the observed and computed peak flows is available for measuring the goodness-of-fit between computed and observed hydrographs. By sensitivity analysis for the storage coefficient, it has been shown that the storage coefficients affect the peak flows. The Clark parameters adopted in the River Rectification Basic Plan have been estimated through an iterative process designed to produce a hydrograph with the peak flow.