• 대한설비공학회지:설비저널
• /
• 제11권2호
• /
• pp.10-15
• /
• 1982

An experimental study on the storage tank which uses sensible heat of water is done. The influence of inlet flow rate (Re), the difference between initial temperature and inlet water temperature(Gr) and the location of inlet and outlet on the performance of storage tank is studied. Development of stratification is examined by measuring the transient temperatures of 36 points inside the tank. Measured values are transformed to the dimensionless parameters in order to calculate the temperature efficiency of storage tank. In the presence of combined natural and forced convection, the development of stratification becomes clearer and thus the efficiency becomes higher, as $Gr/Re^2$ increases.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.253-256
• /
• 2000

In general, Automated Storage/Retrieval Systems (AS/RS ) have racks of equal sized cells to utilize the concept of unit-load. Most of the techniques for the performance estimation of a unit-load AS/RS are a static model or computer simulation. Especially, their models were developed under assumption that the Storage/Retrieval (S/R) machine performs only single command (SC) or dual command (DC). In reality, defending on the operating policy and the status of the system at a particular time, the S/B machine performs a SC or a DC, or becomes .: idle. In order to resolve these weak points, we propose a stochastic model for the performance estimation of unit-load AS/RS by using a single-server queueing model. Expected numbers of waiting storage and retrieval commands are found

• 대한임베디드공학회논문지
• /
• 제7권3호
• /
• pp.129-134
• /
• 2012

The objective of cache is to reduce I/O access of physical storage device so that user accesses their data faster. Traditionally, the most important metric to measure the performance of cache is hitratio. Thus, when the cache maintains hitratio high, it is regarded as a good cache replacement policy. However, the cache miss latency is different when the storages are heterogeneous. Though the cache hitratio is high, if the cache often misses with low performance disk, then the user experiences low performance. To address this problem we proposed eviction cost estimation based cache management. In our result, the eviction cost estimation based cache management has 10~30% throughput improvement compared with LRU cache management.

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.167-176
• /
• 2022

Electrochemical impedance spectroscopy (EIS) is a unique non-destructive technique employed to analyze various devices in different energy storage applications. It characterizes materials and interfaces for their properties in heterogeneous systems employing equivalent circuits as models. So far, it has been used to analyze the performance of various photovoltaic cells, fuel cells, batteries, and other energy storage devices, through equivalent circuit designing. This review highlights the diverse applications of EIS in fuel cells and specific parameters affecting its performance. A particular emphasis has been laid on the challenges faced by this technique and their possible solutions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권1호
• /
• pp.340-367
• /
• 2018

Storage services integration can be done for achieving high availability, improving data access performance and scalability while preventing vendor lock-in. However, multiple services environment management and interoperability have become a critical issue as a result of service architectures and communication interfaces heterogeneity. Storage federation model provides the integration of multiple heterogeneous and self-sufficient storage systems with a single control point and automated decision making about data distribution. In order to integrate diverse heterogeneous storage services into a single storage pool, we are proposing a storage service federation framework named BoxBroker. Moreover, an automated decision model based on a policy-driven data distribution algorithm and a service evaluation method is proposed enabling BoxBroker to make optimal decisions. Finally, a demonstration of our proposal capabilities is presented and discussed.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.85-93
• /
• 1990

A numerical study on the cylindrical packed bed sensible heat storage unit was accomplished by finite difference method. Relation between the heat storage rate and the mechanical pumping energy and the characteristics of the heat storage were investigated for various in let velocities and porosities. In this study, the numerical results are as follows: 1) The temperature distributions of solid and fluid rapidly reached the steady state as the heat capacity ratio was increased. 2) The efficiency of the heat storage was increased as the heat capacity ratio was decreased. For constant heat capacity ratio, however, the efficiency of the heat storage was increased at lower porosity. 3) It is very profitable to design the heat storage system such that the porosity is larger for the large flow rate and samller for small flow rate.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.235-235
• /
• 1990

A numerical study on the cylindrical packed bed sensible heat storage unit was accomplished by finite difference method. Relation between the heat storage rate and the mechanical pumping energy and the characteristics of the heat storage were investigated for various in let velocities and porosities. In this study, the numerical results are as follows: 1) The temperature distributions of solid and fluid rapidly reached the steady state as the heat capacity ratio was increased. 2) The efficiency of the heat storage was increased as the heat capacity ratio was decreased. For constant heat capacity ratio, however, the efficiency of the heat storage was increased at lower porosity. 3) It is very profitable to design the heat storage system such that the porosity is larger for the large flow rate and samller for small flow rate.

• 디지털산업정보학회논문지
• /
• 제7권3호
• /
• pp.25-35
• /
• 2011

In the Semantic Web, storage models are required to efficiently store and retrieve metadata and ontology represented using OWL that can provide expressive power and reasoning support. In this paper, we propose an OWL storage model that can store and retrieve many restrictions and semantic relations defined on ontology with metadata. In addition, we propose some methods and rules to improve query processing efficiency of the proposed storage model. The proposed storage model can store and process large amounts of ontology and metadata because it consists of tables based on the relational database. And the proposed model can quickly provide more accurate results to users because of performing two different types of ontology reasoning and using the prime number labeling scheme to easily identify hierarchy relationships between classes or properties. The comparative evaluation results show that our storage model provides better performance than the existing storage model.

• 정보저장시스템학회논문집
• /
• 제6권2호
• /
• pp.41-46
• /
• 2010

Recently, Flash Memory Drives are one of the best media to support portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major database storage components for desktop and server computers. However, we need to improve traditional storage management schemes based on HDD(Hard Disk Drive) and RAID(Redundant Array of Independent Disks) due to the relatively slow or freezing characteristics of write operations of SSDs, as compared to fast read operations. In order to achieve this goal, we propose a new storage management scheme called Hetero-Mirroring based on traditional HDD mirroring scheme. Hetero-Mirroring-based storage management improves RAID-1 operation performance by balancing write-workloads and delaying write operations to avoid SSD freezing.

• 한국가금학회지
• /
• 제47권4호
• /
• pp.237-245
• /
• 2020

본 연구는 종계의 품종, 산란 연령 및 종란의 보관 기간이 부화 성적에 미치는 영향을 살펴보고 자 한 것으로 한국토종닭인 재래황갈종, 토착레그혼종 및 토착로드종이 산란한 종란을 대상으로 산란 초기인 27~29주령 때 수집한 종란과 산란 후기인 50~52주령에 산란한 종란을 각각 3일, 7일 및 14일 보관 후 부화를 진행하였다. 조사 항목으로는 수정률, 부화율 및 배자발육중지율을 조사하고, 각 요인별 부화 성적을 분석하였다. 분석 결과, 종계의 품종, 산란 연령 및 종란의 보관 기간이 독립적으로 혹은 복합적으로 부화 성적에 영향을 미치는 것으로 나타났다. 종계의 품종에 따른 비교에서 토착로드종의 부화 성적이 가장 저조하였는데, 특히 이들이 산란 초기에 생산한 종란에서 초기 배자 사망률이 현저히 높게 나타났다. 산란 연령에 따른 부화 성적은 산란 초기에 생산한 종란의 부화율이 산란 후기에 생산한 종란에 비해 높게 나타났는데, 초기 배자 사망률은 산란 초기의 종란에서, 후기 배자 사망률 및 사롱란의 비율은 산란 후기의 종란에서 상대적으로 높게 나타났다. 종란의 보관 기간에 따른 부화 성적은 거의 대부분의 조사 항목에서 종란의 보관 기간이 길어질수록 부화 성적은 저하되는 것으로 나타났다. 이상의 결과를 종합할 때, 우수한 부화 성적을 얻기 위해서는 품종에 따른 각기 다른 부화 관리가 필요하며, 산란 후기에 생산된 종란의 이용은 피하고 종란의 보관 기간은 7일 이내로 짧게 하는 것이 바람직할 것으로 사료된다.