• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.279-286
• /
• 1996

Cultivated tilapia (Oreochromis niloticus) in the fresh water were acclimated to the sea water to improve palatability of the fish meat. Physicochemical properties in the rigor mortis of those fish meats were investigated during storage at $0^{\circ}C,\;10^{\circ}C\;and\;20^{\circ}C$. The faster onset of rigor mortis was occurred in acclimated meat than fresh water cultivated meat. Both meats stored at $0^{\circ}C$ showed faster figro mortis than at $10^{\circ}C\;and\;20^{\circ}C$. Significant difference was not observed between the breaking strength and the rigor index. The breaking strength reached maximum over 12hrs after death and then gradually declined, and the rigor index was slowly increased and reached maximum over 18hrs after postmortem. Low temperature and acclimation to the sea water affected the degradation of adenosine triphosphate (ATP), accumulation of inosine monophosphate (IMP) or lactate. These results suggest that the palatability of tilapia muscle cultivated in the fresh water could be improved by acclimation to the sea water which induces the prerigor at the early state of postmortem and the physical changes of fish muscle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.2
• /
• pp.117-122
• /
• 1985

The effects of various factors on the color stability of plum nectar were studied. The data showed that pH and temperature were the most important factors affecting the rate of color loss. The concentration of ascorbic acid affected the rate of color loss in plum nectar. Although the color loss could be influenced by the presence of sugars and their degradation products such as 5-hydroxymethyl-2-furfural(HMF), HMF did not accumulate in sufficient amounts during the storage in the plum nectar to affect appreciably the degradation rate. The pigment was very unstable in the fermented juice and its. spectrophotometric spectrum was changed differently from that of natural plum color material. Materials present in plum nectar itself apparently have an appreciable effect on the rate of color loss.

• Korean journal of applied entomology
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2003

Field application of the entomopathogenic nematode, Steinernema carpncapsae, is limited by its susceptibility to UV irradiation and desiccation especially at leaf spray control. This study was conducted to develop the control technique using alginate biocapsulation of the nematodes against the beet armyworm, Spodoprera exigua and the tobacco cutworm, Sp. litura that are normally infesting hosts above ground level. The alginate capsules including infective juveniles gave significant feeding toxicities to the larvae of the two lepidopteran species. The lethality followed a typical sigmoid dose-mortality pattern with increase of the nematode densities embedded in the capsules. Moisture content in the capsule was critical to the survival of the infective juveniles. More than 80% nematodes could survive above 10% moisture content remained in the capsule. Remaining moisture content within the capsule was dependent on relative humidity, ambient temperature, and capsule size, but not on citric acid reaction time during capsule formation. More than 80% of infective juveniles in the alginate capsules could survive in distilled water at 15$^{\circ}C$ for 60 days. When these nematode capsules containing welsh onion extract as another phagostimulant were applied on the 3rd instar larvae of Sp. exigua infesting peanut plants, they resulted in about 90% control efficacy. These results indicate that the alginate capsulation can be used for leaf-spray agent of the entomopathogenic nematodes as well as for improved storage purpose.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.93-100
• /
• 2013

Many researches have been carried out to reduce and/or to capture the major global warming gases. Especially, the hydrate formation mechanisms were intensively investigated for carbon dioxide sequestration and storage process applications. In this study, the characteristics of film-type crystal growth mechanism of carbon dioxide hydrate were comprehensively examined. Carbon dioxide hydrate crystal was formed in semi-batch type stir reactor at various pressure conditions while the temperature was fixed to be constant to reduce and minimize the guest gas solubility effects. A supply gas composition was 99.999 % of Carbon dioxide, the observation data was collected by optical microscope adopted CCD camera (Nikon DS-5M/Fi1/2M-U2). This study revealed that the guest gas pressure changes significantly altered the crystal growth mechanism and film growth rate of carbon dioxide hydrate crystal. The critical pressure of the carbon dioxide hydrate of crystal growth mechanism change was found to be 2.0 MPa. The capillary force and gas concentration gradient also significantly changed the film-type crystal growth mechanism of carbon dioxide hydrate crystal.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.557-562
• /
• 2013

The thermal expansion and mechanical properties of diglycidyl ether of bisphenol A (DGEBA) with mercaptan hardeners were studied by a comparative method with an amine-adduct type hardener. Thermal expansion and dynamic mechanical properties were measured by thermo mechanical analysis (TMA) and dynamic mechanical ananlysis (DMA), respectively. The $T_g$ and the coefficient of thermal expansion (CTE) of epoxy/amine-adduct type hardener system were $82.6^{\circ}C$ and 71.2 $ppm/^{\circ}C$, respectively. As the number of -SH functional group of mercaptan hardener increased, the $T_g$ rapidly decreased and gradually increased up to ca. $80^{\circ}C$ and the CTE under the $T_g$ rapidly increased to ca. 200 $ppm/^{\circ}C$ from 80 $ppm/^{\circ}C$ and decreased to ca. 100 $ppm/^{\circ}C$. The crosslinking density of epoxy with amine-adduct type hardener was ca.1.5 $mol/cm^3$, while that of epoxy with mercaptan hardeners increased from 1.0 to 1.7 $mol/cm^3$, as the number of -SH functional group increased. The storage modulus can increase up to 2700MPa at $30^{\circ}C$.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.2
• /
• pp.50-56
• /
• 2016

Spherical lithium manganese oxide spinel, $Li_{1.10}Mn_{1.86}Al_{0.02}Mg_{0.02}O_4$ was prepared by wet-milling, spray-drying, and sintering process. In the spray-drying process, solid content in slurry was varied from 20 to 30 wt%. In the sintering process, the precursors have been sintered under air or $O_2$ atmosphere. While the as-prepared samples exhibit excellent electrochemical properties at room temperature, the discharge voltage profiles at 5.0C are very different one from another. The origin for the difference especially at initial state of discharge is oxygen defect. The sample prepared in air has larger capacity related to the plateau at 3.3 V (vs. $Li/Li^+$) which is caused by the oxygen defects than the one prepared in $O_2$. The difference of discharge voltage profiles especially at the final state of discharge comes from different diffusion rate of $Li^+$ ions. The sample prepared from 30 wt% solid content of slurry shows twice higher diffusion rate than the samples prepared from 20 wt% solid content, which is attributed to better compactness between primary particles for the sample prepared from 30wt % solid content than the one prepared by 20 wt%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1881-1888
• /
• 2014

Pre-thermal treatment is important to minimize quality changes during main cooking or storage. In this study, to optimize pre-thermal treatment of carrots, three types of pre-thermal treatments were applied to carrots and quality changes such as physicochemical, nutritional, or sensory properties were observed. Washed and sliced carrots were thermally treated by hot-water immersion ($100^{\circ}C$, 1~10 min), steaming ($100^{\circ}C$, 1~10 min), and stir-frying with oil (10~80 sec). Carrot tissue was maintained until 2 min hot-water immersion or steaming, and they were damaged by just 30 sec of stir-frying. Color and hardness were significantly affected by treatment time and temperature. Color was completely changed after 5 min and 7 min by hot-water and steam treatments, respectively. Hardness decreased to 44% compared with fresh carrot (4,500 g) after 1 min, 3 min, and 20 sec of hot-water, steam, and stir-frying, respectively. For nutritional changes, ascorbic acid, organic acid, and peroxide activity were reduced by all treatments compared with fresh carrot. Especially, succinic acid was dramatically reduced by hot-water treatment. Otherwise, free sugar contents were increased with greater treatment time in all samples. In this study, pre-thermal treatment of carrot was optimal at 2 min steaming treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.4
• /
• pp.465-472
• /
• 2017

In this study, tuna sawdust was added to extruded meat analog in order to develop a meat analog with high quality. Addition of tuna sawdust has merit for utilizing a byproduct from poultry processing. Physicochemical characteristics were examined through the extrusion cooking process. The basic mixture of sample mixed with 65% deffated soy flour 25% isolated soy protein, and 10% corn starch was setup as the raw material. Three kinds of samples were made in total by addition of 15% and 30% tuna sawdust to this mixture. The extrusion process had a screw speed of 250 rpm, die temperature of $140^{\circ}C$, and moisture content of 50%. As addition of tuna sawdust increased, breaking strength and density decreased, specific length increased, and integrity and water holding capacity decreased. Likewise, nitrogen solubility index and protein digestibility decreased as addition of tuna sawdust increased. DPPH radical scavenging activity increased as addition of tuna sawdust addition, whereas it decreased as storage period increased to 30 or 60 days. The value of rancidity decreased as addition of tuna sawdust increased. However, 60 days later, radical scavenging activity increased more or less, and a significant difference was detected 150 days later. In conclusion, addition of tuna sawdust increased soft texture, and nutrition of the basic mixture sample. The process promoting functionality such as improvement of antioxidant function was confirmed through this study.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1067-1074
• /
• 2001

Four different composition of autoxidation drying type waterborne coatings (WBC-1, WBC-2, WBC-3, WBC-4) were prepared by the compounding of bentonite (BEN) as a water swellable clay and organometallic soaps as a drier with acrylic binder and coating additives. The solution viscosity, solid content, rheological properties and drying rate of WBCs were investigated. Also the thermal stability, the transmittance and the water-resistance of the films casted by WBCs were measured, and the surface topology of WBC films were investigated by the scanning probe microscopy. As WBC-2, WBC-3 and WBC-4 containing BEN showed the thixotropy with the shear rate, the storage stability of WBC was a excellent. When the driers was mixed in the ratio of Mn/Zn/Ba=1/2/3, the dry ability of WBCs showed maximum as 5.0 sec at 60$\^{C}$. The initial decomposition temperature and the transmittance of WBC films containing BEN increased in range of 32.2∼54.7$\^{C}$ and 5.1∼8.6% than the commercial WBC (MC-21W), respectively. The water resistance of WBC films increased in order of MC-21W

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.2
• /
• pp.158-164
• /
• 1986

Polyphenol oxidase in apple (Golden Delicious) was extracted, partially purified and its properties were found as follows; Polyphenol oxidase showed optimum pH for activity at 6.5 and optimum temperature at $30^{\circ}C$ and high affinity to o-diphenol compounds. Cysteine, ascorbic acid and sodium metabisulfite appeared to be most effective inhibitors. EDTA showed a slight inhibition. During the enzyme was kept in test tube at $4^{\circ}C\;and\;20^{\circ}C$ for a week, polyphenol oxidase activity decreased sharply during the first four days at $20^{\circ}C$, then decreased slowly as the storage was prolonged. At $4^{\circ}C$, the polyphenol oxidase activity appeared to be relatively stable during the first two days before activity began to decline sharply. Polyacrylamide disc gel electrophoresis indicated four bands with polyphenol oxidase activity. Three bands and one band of the active bands were observed after heating for 1hr at $60^{\circ}C\;and\;70^{\circ}C$ respectively. The enzyme activity was observed 40% after treatment at $60^{\circ}C$ and 5% after treatment at $70^{\circ}C$. Therefore, no difference in the thermal stability was observed between active bands and the enzyme activity.