• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.281-289
• /
• 1992

In an attempt to simulate the flows in the computer hard disk storage system, flow visualization and quantification by image processing technique were applied. Model geometry was constructed while the dynamic similitude was maintained. Circumferential velocities were mapped out in the transient spin-up phase. During the spin-up phase, fluid close to the rotating inner hub approached the solid body rotation, while the fluid in the outer region showed the velocity deficit compared to the rotating speed of the disks. Effects of presence of read/write head arm assembly between the gap were studied by changing the location of the head. The experimental results could serve as a benchmark for the alidation of numerical codes.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.242-245
• /
• 2005

The rotating flow in the space between co-rotating disks is of considerable importance in information storage systems. Hard disk drivers(HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speed requires an improved understanding of fluid motion in the space between disks. In this study, we have tried LES model for inner-disk flowfield to investigate the flow disturbance and the flow structure driven by co-rotating disks. The boundary pattern between inner region and outer region obtained lobe-shape structure clearly and its number has been validated on experimental data by our previous study. We obtain the spectra of velocity and pressure components with several frequencies. We revealed there are two kinds of disturbances, one is global wave propagation and another is local wave propagation on Ekman boundary layer.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.907-908
• /
• 2006

The energy storage systems are being widely researched for the electric power. The operations running in a vacuum chamber mainly consists of a composite flywheel rotor, superconductor bearings, a motor/generator and its controller. Among composed the apparatus, the floating magnet bearing consists of the ring-type permanent magnets with epoxy resin impregnation for reinforcement and surface protection. In order to storage as much energy as possible, the flywheel is supposed to be rotated with very high speed. The magnetic field is analyzed by using the Maxwell 2D/3D for the simulations.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.238-243
• /
• 2013

In this paper, a novel approach for optimized installation and operations of battery energy storage system (BESS) and electric double layer capacitor (EDLC) modules for the renewable energy based intermittent generation is presented for them to be connected with an electric power grid. In order to make use of not merely the high energy density of battery but also the high power density of EDLC modules, it is very useful to devise the hybrid system which combines BESS and EDLC modules. The proposed method adopts the linear programming to calculate the optimized capacity as well as the quadratic programming to transmit the optimal operational signals to BESS and EDLC modules. The efficiency of this methodology will be demonstrated in the experimental study with the real data of wind speed in Texas.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.521-524
• /
• 2008

The existing mobile learning service is the method that provides data packets in real time. It has some problems of much data packet cost and transmission speed to provide the mobile learning service for messy capacity by the existing one. To solve the problems, a secondary storage device like USB is added to a mobile phone. In this paper, we suggest to implementation of the mobile learning system of the new method using secondary storage device.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.311-312
• /
• 2012

Blade pitch control system monitors and adjusts angle of the blades and controls rotation speed of blades. This paper shows 2MW pitch system hardware and electric part. Blade pitch system consists of pitch drive, gear box, motor and energy storage. Fieldbus is base on CANopen protocol. Fail-Safe system moves the blades to a safety position in case of any fault condition. The super capacitor energy storage provides emergency back up to the Pitch servo driver during feathering the blades. This paper studied Blade pitch servo driver and a bi-directional DC-DC converter for fail-safe system.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.37-47
• /
• 1996

The main objectives of this studies are to present the most desirable rice processing complex model system in a given our situations by comparision and analyzing the major factors and, also recommend the future prospect of the rice processing complex in Korea. There are 3 different rice processing complex models in Korea. Those are concrete bin, flat type steel bin and square bin. These systems have a lot of differences and have their own characteristics such as capital requirement, efficiency, storage capacity and quality controls. The major problems of the existing rice processing centers in Korea are high fixed cost and the unbalnced systems. Following is summary to solve this problems: 1. Development of the large scale harvester and high speed continuous dryer. 2. Quality inspective system of bulk grain and large scale temporary storage facilities. 3. Large size readjustment of arable land. 4. Select the convenient location of rice processing center and formulation of well equipment facilities.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.327-328
• /
• 2013

최근 클라우드 컴퓨팅 환경 내에서 많은 IT 기업들이 그동안에 쌓아두었던 소프트웨어, 하드웨어 기술력을 바탕으로 클라우드 컴퓨팅을 제공하는 데 필요한 IT 인프라 구축에 힘쓰고 있는 시점에서 경쟁력이 심화되고 있다. 그렇기 때문에 대용량의 데이터를 사용자에게 고속으로 제공할 수 있는 방안을 연구하는 것이 클라우드 컴퓨팅 환경에서 대두되고 있는 이슈 중에 하나이다. 본 논문에서는 HSS(Hybrid Storage System) 내부 소프트웨어 시스템 설계 기법에 고속 캐싱을 접목시켜 사용자에게 고속으로 데이터를 제공하는 방안을 제시하였다.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1355-1362
• /
• 2022

Nuclear fuel, including its fresh state, must be handled safely due to its critical and hazardous nature. Under normal transport conditions, several interactions take place among different components, such as transport cask used for loading the nuclear fuel and tie-down structure to attach with the vehicle. To ensure structural integrity of the nuclear fuel, vibrations and impacts transmitted from the vehicle must be sufficiently reduced. Therefore, in this study, we conducted two transportation tests from Daejeon to Kijang in Korea to verify the vehicle-induced vibrational characteristics of the KJRR-F fresh nuclear fuel when transported under normal transport conditions. The speed and location of the vehicle were obtained via GPS, and the accelerations between the vehicle and the KJRR-F fresh nuclear fuel were measured. Additionally, using the acceleration results, a structural analysis was conducted to confirm the structural integrity of the nuclear fuel under the most severe conditions during normal transport.

• Journal of Intelligence and Information Systems
• /
• v.12 no.3
• /
• pp.33-46
• /
• 2006

In order to decrease the number of handles, speed up retrieval operations, and manage products efficiently, the investment of facilities such as the installation of the storage equipment and the enlargement of the storage area may be attempted. However, the same objectives can be accomplished by utilizing the existing storage area efficiently. In many types of storage facilities, because of the limitation of storage areas, products are usually piled up, which may cause rehandles of inventories. Rehandles influence significantly the handling efficiency of warehouses. This study develops methods for minimizing rehandles of inventories to improve the operational efficiency of warehouses. A mixed storage problem is addressed for minimizing the expected number of rehandles. Optimization models are proposed and the genetic algorithm is applied to solve the problem.