• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.52-67
• /
• 2011

The research investigates the identification of necessary geographic information needed by forest fire suppression helicopter pilots, and the ways to acquire the required information from public institutions. Firefighting helicopter pilots demand 7 physical geographic and 13 human geographic data. Applying the geographical information acquired from Korean public institutions, the following 15 characteristics (3 physical geographic, 12 human geographic) can be found: altitude and highlands, river, high population and urban areas, roads, national park and state boundaries, fuel re-supply facilities, freshwater areas, cultural assets, (LPG)gas charging stations, gas stations, ammunition storage areas, ground power cables, and steel towers. Within the database of physical geography, there is a need for improvement on bird habitat details. Also, the availability of visibility, wind directions, and wind velocity data is limited and therefore requires refining. The location of refueling areas can be obtained by applying information received from institutions to the GIS spatial analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1489-1493
• /
• 2009

The disaster with many casualties every year by floods, and the economic loss will occur in Korea. The establishment and the recovery measures are necessary. In this research, we analyzed the effect for reducing flood by making washland in flood season, where is used as the wetland in non-flood season in Hwapocheon basin of Nakdong River, Korea. We prepared draingage of inner basin for flood in the past because the water elevation of Hwapocheon is lower than the water elevation of the Nakdong River. On the other hand, now a days, drainage capacity of the expansion and change of the height of the embankment have limitations, because of the increase in torrential rains. In this study, HEC-RAS is used for the unsteady flow routing for the effectiveness analysis of flood level mitigation in flood season. This analysis was performed according to the scenarios of washland construction location and its scale.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.155-163
• /
• 2014

At gas stations, liquid fuels expand and contract in volume owing to temperature variations. In Korea, the ambient temperature varies between $-15^{\circ}C$ in winter and $35^{\circ}C$ in summer. The volume expansion coefficients of liquid fuels are about $0.1%/^{\circ}C$. To investigate this issue, we measured daily changes in fuel temperature and the delivered fuel temperature at gas stations. In addition, we scrutinized the daily, monthly, and annual changes in temperature over past 50 years in Korea. The results show that the temperature of the fuel in the storage tank was maintained at a stable value(summer or winter). Many factors, such as the surrounding conditions, fuel filling frequency, and gas station location, influence the delivered fuel temperature. The results of this study can be applied for establishing a national regulation and will contribute to fair transactions.

• Journal of Biosystems Engineering
• /
• v.33 no.3
• /
• pp.186-195
• /
• 2008

In this paper, a prototype tele-operative system with a mobile base was developed in order to automate cultivation of house melon. A man-machine interactive hybrid decision-making system via tele-operative task interface was proposed to overcome limitations of computer image recognition. Identifying house melon including position data from the field image was critical to automate cultivation. And it was not simple especially when melon is covered partly by leaves and stems. The developed system was composed of 5 major modules: (a) main remote monitoring and task control module, (b) wireless remote image acquisition and data transmission module, (c) three-wheel mobile base mounted with a 4 dof articulated type robot manipulator (d) exchangeable modular type end tools, and (e) melon storage module. The system was operated through the graphic user interface using touch screen monitor and wireless data communication among operator, computer, and machine. Once task was selected from the task control and monitoring module, the analog signal of the color image of the field was captured and transmitted to the host computer using R.F. module by wireless. A sequence of algorithms to identify location and size of a melon was performed based on the local image processing. Laboratory experiment showed the developed prototype system showed the practical feasibility of automating various cultivating tasks of house melon.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.123-133
• /
• 2010

Due to climate change and difficulty in construction of large dam, it is on the increase to use small hydraulic facilities such as washland for the flood control purpose. Since there can be many potential locations for washland in a basin, it is important for determination of optimal location to calculate flood reduction effect of washlands substantially and exactly. In this study, a new scheme to increase flood reduction effect of washlands is suggested. Suggested scheme uses sensitivity analysis of flood reduction effect depending on washland characteristics such as storage volume, spillway elevation and spillway width. The characteristics of the washland is determined by results of sensitivity analysis to maximize flood reduction effect at basin outlet and downstream of a washland. The methodology is applied to Anseong river basin to show its applicability and applied result is compared with those of another studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.396-404
• /
• 2011

Recently, the wide spread popularity of smart phones causes the advent of various mobile applications base on the location information. Since previous pedestrian navigations are applied by extending car navigations, these are not only difficult to provide the appropriate route information, but also raise limitations in the efficient query processing by data structures of car road networks. In addition, these increase the power consumption caused by the growth of I/O frequency. In this paper, we propose a pedestrian road network model for the accurate route information and a storage structure for the pedestrian road network based on POI to reduce the I/O frequency. The proposed method enables efficient route searches over POI reflecting the characteristics and requirements of pedestrian roads. Also, a reduction of query processing costs for the route searching by a data structure considered with POI can save the power consumption more than previous approaches.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1284-1288
• /
• 2008

Recently, there is increasing the development requirement of middleware and interface for GPS(Global Positioning System), RFID(Radio Frequency IDentification), sensor networks. GPS supports a useful location based service. RFID supports products logistic and distribution services through the identification. A sensor network collects a context information, such as humidity, temperature and atmospheric pressure. This paper implements and verifies a integrated service middleware for supporting efficiently process of sensing data collected from RFID, GPS and sensor network. This middleware have the temporary store function, the redundancy exclusion function, certification function, the classification function and the database storage function. Additionary, this middleware connects with low-level adaptor using socket interface and supports the high-level application services using database connection. Therefore, user can develop easily various many ubiquitous application system using proposed middleware instead of each RFID middleware, GPS middleware and, middleware based on sensor network.

• Journal of KIISE:Databases
• /
• v.37 no.6
• /
• pp.292-299
• /
• 2010

Recently, as flash memory is used as digital storage devices, necessity for digital forensics is growing in a flash memory area for digital evidence analysis. For this purpose, it is important to recover crashed files stored on flash memory efficiently. However, it is inefficient to apply the hard disk based file recovery techniques to flash memory, since hard disk and flash memory have different characteristics, especially flash memory being unable to in-place update. In this paper, we propose a flash-aware file recovery technique for digital forensics. First, we propose an efficient search technique to find all crashed files. This uses meta-data maintained by FTL(Flash Translation Layer) which is responsible for write operation in flash memory. Second, we advise an efficient recovery technique to recover a crashed file which uses data location information of the mapping table in FTL. Through diverse experiments, we show that our file recovery technique outperforms the hard disk based technique.

• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.107-128
• /
• 2017

Energy is a major component of almost all economic, production, and service activities, and rapid population growth, urbanization and industrialization have led to ever growing demand for energy. Limited energy resources and increasingly evident environmental effects of fossil fuel consumption has led to a growing awareness about the importance of further use of renewable energy sources in the countries energy portfolio. Renewable hydrogen production is a convenient method for storage of unstable renewable energy sources such as wind and solar energy for use in other place or time. In this study, suitability of 25 cities located in Iran's western region for renewable hydrogen production are evaluated by multi-criteria decision making techniques including TOPSIS, VIKOR, ELECTRE, SAW, Fuzzy TOPSIS, and also hybrid ranking techniques. The choice of suitable location for the centralized renewable hydrogen production is associated with various technical, economic, social, geographic, and political criteria. This paper describes the criteria affecting the hydrogen production potential in the study region. Determined criteria are weighted with Shannon entropy method, and Angstrom model and wind power model are used to estimate respectively the solar and wind energy production potential in each city and each month. Assuming the use of proton exchange membrane electrolyzer for hydrogen production, the renewable hydrogen production potential of each city is then estimated based on the obtained wind and solar energy generation potentials. The rankings obtained with MCDMs show that Kermanshah is the best option for renewable hydrogen production, and evaluation of renewable hydrogen production capacities show that Gilangharb has the highest capacity among the studied cities.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.412-418
• /
• 2011

In the airport, digital signage is used to provide the flight-related information for the passengers. Because the current digital signage is based on wired networking or storage medium, its use is limited in terms of the location and the usage of the digital signage. In order to overcome these limitation, we present a WiBro-based digital signage for the wireless broadband networking and the mobility of the digital signage. We perform comparative experiments with the WiBro-based digital signage and WLAN-based digital signage under various locations, datarate, advertisement contents. The experimental results showed that the WiBro-based digital signage is preferred when the mobility is required, while the WLAN-based digital signage has advantage in datarate.