• The Journal of Information Technology
• /
• v.2 no.1
• /
• pp.103-113
• /
• 1999

In this paper, we propose th soft decision-directed sto-and-go algorithm combining a concept of the stop-and-go algorithm with soft decision-directed algorithm. The proposed algorithm has an enhanced equalization performance according to using the more confidential error signal than two algorithms. By computer simulation, it is confirmed that the proposed algorithm has the performance superiority in terms of residual ISI and convergence speed compared with the adaptive blind equalization algorithm of CMA, Modified CMA(MCMA), Stop-and Go algorithm and simplified 50ft decision-directed algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.3
• /
• pp.223-230
• /
• 2017

A low-cost BLDC motor with hall sensor is used to drive the position control of a facility security monitoring system in this paper. Low measurable frequency of the hall sensor signal in low-speed regions results in difficulty in obtaining accurate speed detection and position control. To improve system control performance, we propose a variable gain of position controller and stop mode control scheme according to the motor speed and error position with pre-set deceleration time. The proposed stop mode control scheme is activated around the stop position to forcibly move the BLDC motor to the stop position in low speed. In the proposed stop mode, the motor current is controlled by the actual speed with the reference rotating angle. The control performance of the proposed position control is verified through experiments at the actual rail guided facility security monitoring system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.893-898
• /
• 2017

A TDC(Time-to-Digital Converter) of counter-type is designed by $0.18{\mu}mCMOS$process and the supply voltage is 1.5 volts. The converted error of maximum $T_{CK}$ is occurred by the time difference between the start signal and the clock when the period of clock is $T_{CK}$ in the conventional TDC. And the converted error of -$T_{CK}$ is occurred by the time difference between the stop signal and the clock. However in order to compensate the disadvantage of the conventional TDC the clock is generated within the TDC circuit and the clock is synchronized with the start and stop signals. In the designed TDC circuit the conversion error is not occurred by the difference between the start signal and the click and the magnitude of conversion error is reduced (1/2)$T_{CK}$ by the time difference between the stop signal and the clock.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.178-181
• /
• 2003

In this paper, it proposes the efficient iterative decoding stop criterion using the variance value of LLR. It is verifying that the proposal iterative decoding stop criterion can be reduced the average iterative decoding number compared to conventional schemes with a negligible degradation of the error performance.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.899-902
• /
• 1999

In this paper, we designed a equalizer that moved the multipath of channel in 8-VSB transmission receiver. After doing the initial equalization with "LMS(Least Mean Square)"aigorithm. this equalizer used "Stop-and-Go" algorithm. Because of estimating SER(Symbol to Error Ratio) every a training sequence, this can positively cope with transformation of channel and because of using fast clock than symbol-clock(10.76 MHz), we are able to reduce a multiplier.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.562-572
• /
• 1992

In this paper, we propose software algorithms which provide acceleration/deceleration characteristics essential to high dynamic performance at the transient states where industrial robots or CNC machine tools start and stop. Software acceleration/deceleration methods are derived from the mathematical analyses of typical hardware systems controlling acceleration/deceleration. These methods make servo motors, which drive axes of motion, start and stop smoothly without vibration in the repeated tools. The path error, which is one of the most significant factors in the performance evaluation of industrial robots or CNC machine tools, is analyzed for linear, exponential, and parabolic acceleration/deceleration algorithms in case of circular interpolation. The analyses show that path error consists of the distance between the required path and generated one through acceleration/deceleration, and that between the generated one through acceleration/deceleration algorithm and the actual one of the end effector of the industrial robot or tool of the CNC equipment.

• Phonetics and Speech Sciences
• /
• v.7 no.2
• /
• pp.19-28
• /
• 2015

This study investigated final consonant error characteristics at word-medial position in children with functional articulation disorder. Data was collected from 11 children with functional articulation and 11 normal children, ages 4 to 5. The speech samples were collected from a naming test. Seventy-five words with every possible bi-consonants matrix at the word-medial position were used. The results of this study were as follows : First, percentage of correct word-medial final consonants of functional articulation disorder was lower than normal children. Second, there were significant differences between two groups in omission, substitution and assimilation error. Children with functional articulation disorder showed a high frequency of omission and regressive assimilation error, especially alveolarization in regressive assimilation error most. However, normal children showed a high frequency of regressive assimilation error, especially bilabialization in regressive assimilation error most. Finally, the results of error analysis according to articulation manner, articulation place and phonation type of consonants of initial consonant at word-medial, both functional articulation disorder and normal children showed a high error rate in stop sound-stop sound condition. The error rate of final consonant at word-medial position was high when initial consonant at word-medial position was alveolar sound and alveopalatal sound. Futhermore, when initial sounds were fortis and aspirated sounds, more errors occurred than linis sound was initial sound. The results of this study provided practical error characteristics of final consonant at word-medial position in children with speech sound disorder.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.53-58
• /
• 2020

This paper is concerned with the performance analysis of MSAGF-MMA with variable step size whose step size varies according to input power signal and decision-directed error signal. The proposed algorithm is made to change according to the input power signal which can reliably increase the convergence speed to the steady state by making the step size less affected by the fluctuation of the input signal in the MMA having the binary flag obtained from the modified Stop-and-Go algorithm. At the same time, the step size can be varied according to the decision-directed error signal so that the residual error can be reduced in the steady state. As a result of computer simulations, it is confirmed that the proposed algorithm has a very good performance in the evaluation of residual ISI and averaged-MSE in steady state as well as in terms of convergence speed to steady state compared to MMA and MSAGF-MMA.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.292-297
• /
• 1990

An anti-swing controller for an overhead crane in the stop position is designed. The developed anti-swing controller improves on the poor damping characteristics of overhead crane by feeding back the crane acceleration as a function of swing angular speed. The experimental results show that this crane using the proposed controller yields small stop position error and rapid damping response characteristics.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.643-651
• /
• 1999

A brief description of the current technology (contact-start-stop) employed in most of today's hard disk drive is presented. The dynamics and head/disk interactions during a start/stop process are very complicated and no one has been able to accurately model the interactions. Thus, the head/disk interface that meets the start/stop durability and stiction requirements are always developed statistically. In arriving at a solution. many sets of statistical tests are run by varying several parameters. such as, the carbon overcoat thickness. lubricant thickness. disk surface roughness, etc. Consequently, the cost associated III developing an interface could be significant since the outcome is difficult to predict. An alternative method known as Load/Unload technology alters the problem set. such that. the start/stop performance can be designed in a predictable manner. Although this techno¬logy offers superior performance and significantly reduces statistical testing time, it also has some potential problems. However. contrary to the CSS technology. most of the problems can be solved by design and not by trial and error. One critical problem is that of head/disk contacts during the loading and unloading processes. These contact can cause disk and slider damage because the contacts are likely to occur at high disk speeds resulting in large friction forces. Use of glass substrate disks also may present problems if not managed correctly. Due to the low thermal conductivity of glass substrates. any head/disk contacts may result in erasure due to frictional heating of the head/disk interface. In spite of these and other potential problems. the advantage with L/UL system is that these events can be understood. analyzed. and solved in a deterministic manner.