• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.511-518
• /
• 2020

There have been reports that the "jeongcho (定礎)" letters of the foundation stone at the historical site No. 280 of the "Main Building of the Bank of Korea in Seoul" were written by Prince Ito Hirobumi (伊藤博文), the first Resident-General of Japan in Korea. An on-site investigation by an advisory group consisting of three experts in calligraphy; revealed that the two characters of '定礎' inscribed on the foundation stone are the characteristics of Ito Hirobumi's handwriting, judging from the writing style and habits observed in the collections of the Central Library of Hamamatsu City, Japan. It was reported that his writing was confirmed by the experts, but no basis was provided. To provide more objective and quantitative supporting data, rather than qualitative judgment based on feeling, it is necessary to present the basis for judgment through quantitative image comparison results through image analysis. In this paper, using image analysis software, Ito Hirobumi's calligraphy writing and the inscribed characters of the foundation stone were compared and analyzed to confirm the contents of the press release. The character comparison process and character area measurement results are a good example showing that if objective judgment basis data are needed in a similar situation, an objective judgment basis can be prepared through quantification using image analysis.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.23-27
• /
• 2015

In this paper, eco-friendly paper strain gauge was fabricated in the way of printing strain gauge on paper substrate, using PEDOT:PSS ink and inkjet printer technology. As a p-type conductive high polymer, PEDOT:PSS is known to be piezoresistive effect. I formed a strain gauge by connecting in parallel 5 lines of $60{\mu}m$ width printed with PEDOT:PSS. To minimize surrounding influence such as temperature, I formed wheat-stone bridge by combining 4 strain gauges (quarter-bridge strain gauge) which were made up of PEDOT:PSS 5 lines and measured. In quarter-bridge strain gauge, only two strain gauges, facing each other, arranged in strain and horizontal direction were deformed while the other two strain gauge of vertical direction were not. Therefore, quarter-bridge strain gauge showed the output of half bridge. The fabricated quarter-bridge strain gauge had output sensitivity of $105.6{\mu}V/V{\cdot}mm$ and its output linearity was relatively good.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.471-477
• /
• 1999

A new stress, load and displacement controlled direct shear apparatus has recently been developed at the Hyundai Institute of Construction Technology This direct shear apparatus is capable of testing of rock joint under constant normal stiffness, constant normal stress or constant normal load boundary conditions. This paper describes this direct shear apparatus and illustrates results of shear tests at constant normal stress condition, constant normal load condition and constant normal stiffness condition with dental stones which have a same joint roughness and unconfined compressive strength.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.215-218
• /
• 2004

This paper is about a study of development on multi crusher system. This system use the principle of the Yeon-Ja-Bang-A. This system consists of the power part and the power transmit part, the Yeon-Ja Stone part, the crusher part, an input part, an output part. The advantage of this system decrease about working hours and installation aera.

• Journal of the Korean Statistical Society
• /
• v.25 no.1
• /
• pp.1-24
• /
• 1996

In selecting a final tree, Breiman, Friedman, Olshen, and Stone(1984) compare the prediction risks of a pair of tree, where one contains the other, using the standard error of the prediction risk of the larger one. This paper proposes an approach to selection of a final tree by using the standard error of the difference of the prediction risks between a pair of trees rather than the standard error of the larger one. This approach is compared with CART's for simulated data from a simple regression model. Asymptotic results of the approaches are also derived and compared to each other. Both the asymptotic and the simulation results indicate that final trees by CART tend to be smaller than desired.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.319-326
• /
• 2000

It is investigated character of the dynamic behavior at over excavation zone of roadbed using crushed stone instead of lean concrete. It is considered that behavior of roadbed using PENTAGON-3D and Baber's equation. Typical load of sine wave type using impact factor is compared to moving load system to examine relationship in using PENTAGON-3D case. Variations of this paper are material properties of roadbed, train velocity, subgrade bearing capacity. Using variations, safety of roadbed is estimated by dynamic behavior character.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.643-644
• /
• 2008

Various researches on 3D silhouette extraction have been performed in the area of computer graphic. This paper presents a new method for internal pattern extraction by using an arbitrary region silhouette control technique. The proposed method was tested by using 3D data of stone pagodas. The results show that the proposed method particularly improves the performance of internal pattern extraction.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.138-141
• /
• 2009

This paper introduces AmericaView, a consortium for promoting remote sensing education, research and applications. As a case study, GeorgiaView is described in more detail. The AmericaView Consortium and StateView Consortia are good examples of collaboration for broadening the horizon of remote sensing applications in South Korea. Furthermore, the AmericaView example represents an opportunity for building a stepping stone to international collaboration.

• Journal of the Korean Mathematical Society
• /
• v.49 no.2
• /
• pp.265-291
• /
• 2012

In this paper, we consider the regularity theory and the existence of smooth solution of a degenerate fully nonlinear equation describing the evolution of the rolling stones with nonconvex sides: $\{M(h)=h_t-F(t,z,z^{\alpha}h_{zz})\;in\;\{0<z{\leq}1\}{\times}[0,T] \\ h_t(z,t)=H(h_z(z,t),h)\;{on}\;\{z=0\}$. We establish the Schauder theory for $C^{2,{\alpha}}$-regularity of h.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.344-347
• /
• 2005

The cylinder liners of low speed engine are one of a important equipment in merchant ship. But, the precision machining method of cylinder liner is not developed sufficiently. This paper shows a new honing method using by CBN honing stones.