• Conservation Science in Museum
• /
• v.23
• /
• pp.31-48
• /
• 2020

Conservation treatment of stone cultural properties in the open air is mainly conducted by companies specialized in conservation treatment. This study presents cases of conservation treatment of stone cultural properties housed outdoors in Seoul, including the Three-story Stone Pagoda at Nakseongdae in Gwanak-gu. The present condition of and damage to stone cultural properties are investigated and the materials and techniques used for conservation treatment are presented. The contamination on the surface of stone cultural properties located in downtown areas shows features specific to the related areas, meaning each case requires tailored conservation techniques. This study is expected to serve as reference for future conservation treatment of stone cultural properties in Seoul as well as others in museum collections exhibited outdoors. It is hoped that the cases presented in this study can become widely known to people in charge of conservation treatment in the private and public sectors to improve the quality of conservation treatment applied to stone cultural properties.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.227-235
• /
• 2012

Purpose: This study compared the surface hardness (Vickers) and microstructural characteristics between a type IV stone with and without die hardening treatment, a polyurethane die material. Methods: Materials used were a type IV stone(MG Crystal Rock), two die hardeners (Hardening bath, Epox-it), and a polyurethane resin material(Polyluck). Six specimens per group were prepared according to manufacturer's directions. The prepared specimens were tested by means of hardness test, one-way ANOVA analysis, scanning electron microscopic(SEM) observations and energy dispersive spectroscopic(EDS) analysis. Results: In the hardness test and its statistical analysis, there was no significant difference in the surface hardness between a type IV stone and type IV stone with die hardener coating, type IV stone mixed with an epoxy like material instead of water. In contrast, polyurethane resin material exhibited significantly greater surface hardness than other specimen groups (p<0.05). Conclusion: By considering the results of the hardness test, SEM observations and EDS analysis, although the die hardeners on type IV stone did not show remarkable improvement in surface hardness, the die hardener coating on the surface of type IV stone material did show decrease of microporous and improvement of surface defects.

• Restorative Dentistry and Endodontics
• /
• v.49 no.2
• /
• pp.17.1-17.8
• /
• 2024

Objectives: This study evaluated the effect of serum calcium, parathyroid hormone (PTH), vitamin D, and uric acid levels on pulp stone formation. Materials and Methods: Patients who were admitted to the Muğla Sıtkı Koçman University, Faculty of Dentistry, Department of Oral and Maxillofacial Radiology for dental complaints were registered. Among these patients, individuals who had routine biochemical tests at the same period in the Outpatient Clinics of Muğla Sıtkı Koçman University Training and Research Hospital were included in the study. The patients with at least 1 pulp stone on panoramic radiographs recorded as the "pulp stone group" while patients without any pulp stones were the "control group". Demographic data and serum levels of calcium, PTH, vitamin D, and uric acid were retrospectively evaluated in both groups. Student t-test or Mann-Whitney U test was used to evaluate the differences between the groups. Results: Among 151 patients, dental pulp stone was detected in 53.6% of patients, and 82.7% of these patients were female. Female sex and pulp stone formation were significantly associated (p = 0.001). The mean age of the pulp stone group was 43.9, while it was 39.9 in the control group, without any significant correlation between age and pulp stone (p > 0.05). Similarly, there were no significant differences in serum levels of PTH, vitamin D, uric acid and calcium between groups (p > 0.05). Conclusions: According to the present study, the effect of dental factors rather than systemic factors should be considered primarily in pulp stone formation.

• Korean Journal of Radiology
• /
• v.2 no.1
• /
• pp.14-20
• /
• 2001

Objective: To compare the usefulness of unenhanced spiral CT (UCT) with that of excretory urography (EU) in patients with acute flank pain. Materials and Methods: Thirty patients presenting with acute flank pain underwent both UCT and EU. Both techniques were used to determine the presence, size, and location of urinary stone, and the presence or absence of secondary signs was also evaluated. The existence of ureteral stone was confirmed by its removal or spontaneous passage during follow-up. The absence of a stone was determined on the basis of the clinical and radiological evidence. Results: Twenty-one of the 30 patients had one or more ureteral stones and nine had no stone. CT depicted 22 of 23 calculi in the 21 patients with a stone, and no calculus in all nine without a stone. The sensitivity and specificity of UCT were 96% and 100%, respectively. EU disclosed 14 calculi in the 21 patients with a stone and no calculus in eight of the nine without a stone. UCT and EU demonstrated secondary signs of ureterolithiasis in 15 and 17 patients, respectively. Conclusion: For the evaluation of patients with acute flank pain, UCT is an excellent modality with high sensitivity and specificity. In near future it may replace EU.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.250-259
• /
• 2018

We investigated the petrological features of the stone materials used in the Jeolla Usuyeong rampart and estimated their provenance through the geological survey. The Jeolla Usuyeong was designated as a historic site (No. 535) on 2016. Since the remaining rampart is less than 15%, it is necessary to make conservation on it. In this study, we discriminated the stone materials used for the rampart according to their petrographic characteristics and estimated the volume proportion of each stone by the rock type. Also, we measured the whole-rock magnetic susceptibility. The petrographic features of the stones in the rampart were compared with those in the vicinity by their mineral composition and texture. The stone materials of the rampart mainly consist of the tuff, lapilli tuff, and lapilli stone. Among these three kinds of rocks, lapilli tuff is quantitatively the most abundant (60.3%), the next is tuff (34.7%), and lapilli stone (2.5%) shows the least amount. The whole-rock magnetic susceptibility of the tuffaceous rocks can be divided by the value of $1.0{\times}10^{-3}$ SI unit. Also, the compressive strength of tuff exhibits about 156 MPa, which is adequate to reuse for the repairing work. Petrological comparisons between stone materials and outcrop rocks distributed around the Hwawon peninsula leads to a conclusion that the stone materials of the rampart are likely to have been delivered from the Dongoeri and Sindeok-ri. Judging from the results of the comparison on the frequency of use and physical properties among the tuffaceous rocks, tuff is considered to suitable for restoring the rampart.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.211-222
• /
• 2011

The Mireuksaji stone pagoda was built foundation in the reign of King Moo (AD 639) in the Baekje Kingdom of ancient Korea. The stone properties of the pagoda were quarried from Mountain Mireuk, which are medium to coarse-grained light gray biotite granite formed during the Jurassic, and are composed of quartz, feldspar, biotite, muscovite, apatite and allanite. It was strong relatively but became weak from prolonged weathering, and as a result its durability fell to $883kgf/cm^3$ (moderate weathering degree). In the process, cut-off (31%), deletion (57%) and crack (44%) occurred in foundation materials by the influence of bending, shear and compressive force. Hereat, the original materials were treated through a preservation process. As a result, approximately 74% of original materials have been able to be reused, inclusive of 55 materials that were to be partially replaced by new stones. On the other hand, it is inevitable that the other 26% including exterior stones and support-based stones have to be partially replaced by new stones. It implies that there is a need to find stones that are identical or similar to those of the pagoda. Consequently, a lithological study was conducted on stones in quarries located in Iksan and an investigation was made into their properties. The results showed that stones in the Hwangdeung area were most similar to those of the pagoda mineralogically and their properties were most stable.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.617-623
• /
• 2012

This study was performed to measure the accuracy of different gypsum materials by a white light dental scanner. A master model with the prepared lower full arch tooth was used. The type IV and scannable stone were used for 20 stone casts (10 casts each) duplicated a master model of mandible. The distance between the reference points were measured and analyzed by the Delcam $Copycad^{(R)}$ (Delcam Plc, UK) 3D graphic software. The t-student test for paired samples were used for statistical analysis. The mean differences to master model for type IV stone and scannable stone model were 0.29~0.56 mm, and 0.17~0.35 mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between the master model and type IV/scannable stone (p<0.05). Two different gypsum materials showed clinically acceptable accuracies of full arch digital impression produced by them. Besides, in both gypsum materials, the differences to the master model detected appear to provide enough accuracy for clinical application.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.5
• /
• pp.492-501
• /
• 2001

The use of alginate impression materials today is prevalent because of its efficiency and simplicity in clinical settings. Unfortunately, the simplicity of the procedure tends to lull the dentist into a sense of well-being, and lead him into using careless or sloppy technique. Alginate impression materials are used to fabricate diagnostic and preliminary casts, and the final cast. Incorrect use of this material is known to affect the accuracy of the final prosthesis. The purpose of this study was to compare the effect of different mixing methods of alginate impression material and tray adhesive on the accuracy of the stone cast produced by each method. A total of 30 stone casts were produced by using 3 different types of mixing methods (10 stone cast for each mixing method, respectively). The first method utilized an automatic-mixing machine to mix alginate while the second method was carried out manually, strictly following manufacturer's instructions. The third method also involved manual mixing, but did not follow the manufacturer's instructions and was done in a random fashion. Also, 20 additional stone casts were produced by using alginate with or without tray adhesives were included in the study to evaluate effects of tray adhesives on the accuracy of alginate impression. 10 stone casts were produced by adding tray adhesives to the interior surface of the impression tray prior to taking the impression. The other 10 excluded this step. A total of 50 stone casts were analyzed by the three-dimensional measuring machine to measure and compare the dimensional changes of the impression material of each group. The results are as follows. 1. No significant difference was found between the automatic mixing group and the manually-mixing group(p>0.05). 2. For the group that followed manufacturer's instructions, less dimensional changes were record ed than the group that didn't in measuring distanced 4(p<0.05). 3. The group that used tray adhesives showed less dimensional changes(p<0.05). The findings revealed that mechanical methods of mixing alginate impression materials had little influence on dimensional changes. However, it is proven that following manufacturers instructions in alginate impression taking is an important step in acquiring accurate impressions and tray adhesives may play an important role in enhancing the results.

• Journal of the Korean earth science society
• /
• v.35 no.7
• /
• pp.554-561
• /
• 2014

The rock materials from the two stone heritages in the Seonbonsa temple, Gwanbong Seokjoyeoraejwasang (stone Buddha) and three-storied Stone Pagoda, show almost identical petrographic characteristics. They are greyish white porphyritic granites which mainly consist of plagioclase, alkali feldspar, quartz, biotite, hornblende, and chlorite. The rocks from the both heritages are petrographically similar to those from the outcrops of the Palgongsan granite near the temple. Modal compositions exhibit that the rocks from the stone Buddha belong to monzogranite, whereas those from the pagoda and the outcrop near the temple correspond to syeno- to monzo granite. Whole rock magnetic susceptibility data indicate that the rocks from the stone Buddha, the pagoda, and the outcrop have nearly the same susceptibility values ranging 9-16(${\times}10^{-3}\;SI$). Gamma spectrometer data obtained from these rocks also demonstrate the same value range. In conclusion the two stone heritages in the Seonbonsa temple were made of the Palgongsan granite surrounding the temple.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.207-218
• /
• 1993

The purpose of this study was to evaluate the reproducing accuracy of stone casts made from complete arch impressions using different impression materials. The impression materials studied were 1) polyether, 2) polysulfide, 3) polyvinyl siloxane, and 4) irreversible hydrocolloid. Impressions were made from a partially edentulous acrylic resin model with metal inserts in canine, first molar region bilaterally and mid palatal vault region. Each distance between 2 out of 5 meauring points was measured by using 3dimensional measuring machine. Impressions were poured at once with a type IV dental stone. Data were analyzed using t-test with a sample size of six. The results were as follow : 1. Polysulfide and polyether were significantly superior to polyvinyl siloxane and irreversible hydrocolloid in reproducing full arch model(p<0.05), but there were no statistical differences in amount of dimensional reproducing accuracy for full arch impression between polysulfide and polyether(p>0.05). 2. There were statistical differences in amount of dimensional reproducing accuracy between edentulous area and tooth bound area for polysulfide and polyether(p<0.05). but no statistical differences were observed for polyvinyl siloxane and irreversible hydrocolloid(p>0.05).