• 제목/요약/키워드: Stone Materials

검색결과 606건 처리시간 0.034초

CNT/Epoxy 접착제를 이용한 돌침대용 석재/목재 복합재의 열적특성 및 접착특성 개선 연구 (A Study on Improvement of Thermal and Adhesion Properties of Stone/Wood Composites for Stone Bed using CNT-epoxy Adhesive)

  • 김종현;신평수;권동준;문선옥;박종만
    • Composites Research
    • /
    • 제29권5호
    • /
    • pp.276-281
    • /
    • 2016
  • 본 연구에서는 돌침대용 석재/목재 복합재의 열적특성 및 접착특성 개선에 대한 연구를 진행하였다. 기초 물성을 체크하기 위해 인장실험을 진행하였고 석재 및 목재의 실시간 온도측정을 진행하였다. 석재/목재 복합재의 가열부위에 따른 열적 특성을 알아보기 위해 석재를 위로 두었을 때와 목재를 위로 두었을 때 두 가지 방법으로 가열을 실시하였다. 에폭시 접착제에 CNT를 넣음으로써, 열적 및 접착특성의 변화를 알아보기 위하여 실시간 온도측정과 랩 전단 실험을 실시하였다. 실험결과 목재를 위로 두었을 때 열적 특성이 좋은 것을 확인하였고 에폭시 접착제에 CNT를 넣음으로써 접착특성 및 열적특성이 개선됨을 볼 수 있었다.

석재가공시 발생하는 소음의 특성에 관한 연구 (A Study on the Characteristics of Noise occurred when processing Stone Material)

  • 주덕훈;국정훈;김재수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.231-235
    • /
    • 2007
  • Stone Industry in our country is classified mainly in view of supply of raw materials ingredients, as follows: Stone-Quarrying Industry who develops the natural resources, Stone Processing Industry who processes the quarried raw ore into construction materials and stone-products, Stony Mountain-Aggregate Industry who supplies the elementary raw materials ingredients to construction section, respectively. Among them, while Stone Processing Industry sells its turnover around billion-Won level per annum per a company, most of other job sites are paltry, adopting less than 10 employees, and it is real state that their working environments are also very coarse. The Noise originated from processing-instrument which generates at such Stone Processing Industry is as so repeatedly reiterating Loud Noise that most of the spot workers are forcedly imposing such dangers as the severe unpleasant feeling and hearing impairments. On this viewpoint, this Research is now analyzing on the frequency characteristics with regard to the Noise that generated from various processing-instruments, and then based on this, in order to grasp the influence of the Loud Noise generating when process the stone materials, this study has ever evaluated it with PSIL and NR. It is considered that such data could be used as the valuable material for establishment of a comfortable working environment hereafter.

  • PDF

워터젯 수압분사와 화염버너에 의한 석판재 표면처리의 품질특성 비교연구 (Comparison Study on Quality Characteristics of Surface Treatment of Stone Board Materials by Water-jet System and Flame-burner)

  • 강지호;장명환
    • 대한안전경영과학회지
    • /
    • 제5권1호
    • /
    • pp.115-128
    • /
    • 2003
  • To comparison the surface treatment methods of stone board materials, the results of Dorry's abrasive test were 23.4 for water-jet system and 18.9 for flame-burner system. Therefore abrasive hardness, the stone board materials by the water-jet system was greater than one by flame-jet system. As a result of Shore's hardness test, the stone board materials by water-jet system was twice greater than one by flame-jet system. Authors carried out microscopic observation to survey a defection of the composition minerals for two methods, but all of the both methods have not founded a defection. Therefore, the stone board materials by water-jet system was greater durability than one by flame-jet for the surface treatment methods.

경주 불국사 삼층석탑(석가탑) 파손원인에 관한 연구 (A Study on the Damage of the Three Storied Stone Pagoda of Bulguksa Temple in GyeongJu)

  • 지성진
    • 건축역사연구
    • /
    • 제22권6호
    • /
    • pp.47-58
    • /
    • 2013
  • The purpose of this study is to analyze the cause of damage to the three storied stone pagoda of Bulguksa temple in GyeongJu. This report is attempted to making reinforcement and conservation plan through investigating and analyzing the cause of damage to that. The damage is caused by occurring of stress, degrading of stone strength, changing of underground soil structure, natural disasters and so on. Compressive stress, shear stress, bending stress and lateral pressure affected to the pagoda since built up. Ultrasonic examination data tells the strength of the stone. According to this result, strength of the stereobate stone materials is enough to support the weight of the upper ones. But we could found many other factors of the damage could consider, for example the problems occurred on building the pagoda construction and the weakness of the stone material(soft rock). And many environmental factors being changed in soil structure(subsidence of soil and degradation of bearing power of soil and freezing and melting of soil) can be seen as the cause of the damage. Natural disasters like earthquake, lightning and heavy rain were also thought to give direct impact to the damage. At last Concentration of compressive stress caused the crack and exfoliation on the stone materials and shear stress, bending stress and lateral pressure were main causes of the stereobate stone materials shearing.

수종 치과용 석고의 접촉각 및 젖음성에 관한 비교 연구 (A STUDY ON THE CONTACT ANGLE AND WETTABILITY OF THE DENTAL STONES)

  • 조리라;정경호;김경남
    • 대한치과보철학회지
    • /
    • 제41권1호
    • /
    • pp.61-70
    • /
    • 2003
  • The purpose of this study was to investigate the contact angles and wettability of conventional dental stones and improved dental stones and newly developed dental stones on several impression materials. Materials included in this study were several dental stones and newly developed dental stone ; 2 type III stones (Snow Rock, New Diastone), 6 type IV stones(Crystal Rock, Vel Mix, Fuji Rock, Tuff Rock, Resin Rock and newly developed dental stone) and 1 type V stone (Die Keen). Contact angles on the impression materials were measured with contact angle measuring device. Ten specimens for each material, total 180 specimens were made on void entrapment model. The two impression materials (Handae, GC) were used to produce 9 groups of die stone casts form void entrapment model. Voids in the stone casts were counted under a stereoscopic microscope. The grad for the reproduction ability of each materials on the void entrapment model was calculated from the casts by one examiner. From the experiment, the following results were obtained : 1. The newly developed stones showed smallest contact angle. Type III dental stone had larger contact angles than type IV and V stones. Contact angle was much affected by the impression materials. 2. Resin containing die materials such as Tuff Rock and Resin Rock had smallest void number than any other groups. 3. In comparing reproduction parameters, Tuff Rock and Resin Rock presented superior results, while Vel Mix showed lowest reproduction ability.

석재 가공시 발생한 석분슬러지의 콘크리트 혼화재료로의 활용 (Utilization of Stone Sludge Produced by Stone Block Manufacturing Process as Concrete Admixtures)

  • 정진섭;이종천;양극영;소광호
    • 한국건축시공학회지
    • /
    • 제8권6호
    • /
    • pp.83-89
    • /
    • 2008
  • The stone sludge produced during the manufacturing process of stone blocks is considered as one of industrial waste materials. This stone sludge are managed to either burying under the ground or stacking in the yard, but this disposal process is required an extra costs. The stone sludge disposal like burying or stacking also cause environmental pollutions such as ground pollution and subterranean water pollution. Thus, this study was conducted to explore the possibility of recycling of stone dust sludge as a concrete mixing material in order to extend recycling methods and to solve the shortage of aggregate caused by recently increased demand in construction. Based on the experiment results on various ratios of cement to stone sludge content, the compressive strengths of concrete were recorded in the range of $20{\sim}30N/mm2$. The results did not show any decrease in compressive strength due to the stone dust content. It can be concluded that the stone sludge produced by stone block manufacturing can be sufficiently recycled as one of concrete mixing materials in the aspect of compressive strength.

공동주택 외부 석재마감에 따른 창호주위 누수방지에 관한 연구 (A Study in the Water Leakage Prevention around the Windows with the Stone Materials in the Apartment House)

  • 윤홍중;조태제
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
    • /
    • pp.117-121
    • /
    • 2006
  • This study intends to suggest the effective methods for water leakage prevention around the windows in stone works to up-grade the outdoor public space that has been taken much portion of apartment housing trends. The subjects of the study was selected among the domestic subcontractors of stone works. There are four methods for water leakage prevention around the windows; Firstly, the painting water-proof method after the masonry. Secondly, the urethane water-proof method after galvanizing panels on the gap. Thirdly, the separation method between stone and substructure and the last one is water-proof method that they put some water-proof screen between stone and substructure with the EPDM sheets. According to the analysis of the water-proof effects, constructability and planning, we could approach to conclusion that the most influent items to the water-leakage are the filling material's deformation, the state of oxygenation and deterioration of work skill. Among the water-proof methods in construction the EPDM sheet is most excellent water-proof method to meet the technical conditions. However, we have to apply it to stone works as a water-proof method for the decrease of the leakage defects after standardizing the materials, test and construction skill because there are many work skills according the subcontractors.

  • PDF

수평배수재용 순환골재와 쇄석의 현장시험 (Field Test of Recycled Aggregates and Crushed Stone as Horizontal Drains)

  • 김시중;이달원
    • 한국농공학회논문집
    • /
    • 제54권1호
    • /
    • pp.39-45
    • /
    • 2012
  • In this study, field test on utilization of recycled aggregates and crushed stone as horizontal drains to use an alternative material of sand in soft ground is practiced. The settlement with time showed similarly ranged from 28.4-30.3 cm in the all horizontal materials. The excess pore water pressure of the recycled aggregates and crushed stone showed smaller than sand. The small the excess pore water pressure becomes faster the consolidation period and it can reduces the amount of residual settlement. Therefore, it was verified as having enough to an alternative materials that the field applicability is excellent. The distribution of earth pressure with time showed similarly in the all horizontal materials. The recycled aggregates and crushed stone was very applicable to practice because there is no mat resistance in the horizontal drains layer. The penetration rate in the SCP and PVD improvement sections did not show large differences as the grain size and the horizontal drainage height increases.

Utilization of Kota stone slurry powder and accelerators in concrete

  • Devi, Kiran;Saini, Babita;Aggarwal, Paratibha
    • Computers and Concrete
    • /
    • 제23권3호
    • /
    • pp.189-201
    • /
    • 2019
  • Recent advances in the concrete technology are aiding in minimizing the use of conventional materials by substituting by-products of various industries and energy sources. A large amount of stone waste i.e., dust and slurry form both are being originated during natural stone processing and causing deadily effects on the environment. The disposal problem of stone waste can be resolved effectively by using waste in construction industries. In present work, Kota stone slurry powder, as a substitution of cement was used along with accelerators namely calcium nitrate and triethanolamine as additives, to study their impact on various properties of the concrete mixtures. Kota stone slurry powder (7.5%), calcium nitrate (1%) and triethanolamine (0.05%) were used separately as well in combination in different concrete mixtures. Mechanical Strength, modulus of elasticity and electrical resistivity of concrete specimens of different mix proportions under water curing were studied experimentally. The durability properties in terms of strength and electrical resistivity against sulphate and chloride solution attack at various curing ages were also studied experimentally. Results showed that accelerators and Kota stone slurry powder separately enhanced the mechanical strength and electrical resistivity; but, their combination decreased strength at all curing ages. The durability of concrete specimens was also affected under the exposure to chemical attack too. Kota stone slurry powder found to be the most effective material among all materials. Material characterization was also done to study the microstructural properties.

용제기반 친환경 stone paper의 제조 (Preparation of solvent-based eco-friendly stone paper)

  • 정석주;감도윤;최은옥;조현;이병우
    • 한국결정성장학회지
    • /
    • 제33권4호
    • /
    • pp.139-144
    • /
    • 2023
  • 무기충진제와 가소성 폴리머로 이루어진 스톤페이퍼는 기존 종이의 원료인 펄프를 사용하지 않아 자연보존에 기여하고 생분해성을 가지게 되면 보다 친환경적인 소재로 사용이 가능하다. 현재 대부분의 스톤페이퍼는 가열압출성형법으로 제조하고 있어 작업성을 증진시키기 위해 세라믹 충진제의 양이 제한되어 다양한 물성을 가질 수 없다. 본 연구에서는 이러한 스톤페이퍼 조성을 용제를 사용한 액상으로 제조하게 됨으로써 세라믹 충진제 첨가량에 제한이 적고 생분해성 조절을 위한 첨가제 투입도 용이하였다. 폐패각인 굴껍질을 열처리하여 무기충진제로 사용하였고, 재활용 소재로도 쉽게 구할 수 있는 폴리비닐클로라이드를 유기결합제로 사용하였다. 일반적인 폴리비닐클로라이드용 유기용제를 사용하여 폴리비닐클로라이드를 용해시킨 후 무기충진제와 생분해성을 부여하기 위한 셀룰로스를 혼합하여 시트 형태로 가공하여 용제기반 스톤페이퍼를 제조하여 그 물성에 대해 분석하였다.