• Journal of Advanced Marine Engineering and Technology
• /
• 제2권1호
• /
• pp.15-22
• /
• 1978

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.202-209
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, 6 kinds of steel wires, 4 kinds of combined steel wires, 8 kinds of combined steel wires with screen meshes were used. The results are summarized as follows; Among 6 kinds of steel wires $({\phi}0.7\;mm,\;{\phi}0.9\;mm,\;{\phi}1.2\;mm,\;{\phi}\;1.6\;mm,\;{\phi}2.0\;mm,\;{\phi}2.7\;mm),$ the two steel wires $({\phi}0.7\;mm,\;{\phi}0.9\;mm)$ showed the highest in effectiveness. Among 4 kinds of combined steel wires $({\phi}l.6-{\phi}l.2\;mm,\;{\phi}1.2-{\phi}l.6\;mm,\;{\phi}0.9-{\phi}l.2\;mm,\;{\phi}l.2-{\phi}0.9\;mm),\;the\;{\phi}1.2-{\phi}0.9\;mm$ showed the highest in effectiveness. Among 8 kinds of combined steel wires with screen meshes $(150-{\phi}0.9\;mm,\;150-{\phi}l.2\;mm,\;{\phi}0.9\;mm-150,\;{\phi}1.2\;mm-150,\;150-{\phi}0.9\;mm-150,\;150-{\phi}1.2\;mm-150,\;150-{\phi}l.6\;mm-150,\;150-{\phi}2.0\;mm-150),\;the\;{\phi}l.2\;mm-150$ showed the highest in effectiveness.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.62-67
• /
• 2009

This paper describes the characteristics of scroll type stirling engine receiver. Scroll type stirling engine operated scroll compressor and expander instead of piston. Pass dimension of the receiver was $14(W){\times}14(H)$ mm and total pass length was 5,049 mm. External dimension of the receiver was $300{\times}300mm$. The experimental facility consisted of parabolic dish concentrator, compressor to supply air, triplex air filter, and flowmeter. In this study, basic experimental conditions were set at a inlet pressure of 5 bar and volume flow rate of $25m^3/hr$. As a result, air temperature in receiver at each measuring position of point 1, 2, 3 were $241^{\circ}C$, $465^{\circ}C$, and $542^{\circ}C$ respectively at inlet pressure of 5.5 bar and volume flow rate of $24.6m^3/hr$. As DNI increasing, heat transfer coefficient of the receiver changed from $695W/m^2K$ to $827W/m^2K$. Average heat transfer coefficient of receiver in the experiment was $798W/m^2K$. In addition, receiver efficiency became about 83%.

• 설비공학논문집
• /
• 제24권5호
• /
• pp.415-421
• /
• 2012

Stirling engine is an external combustion engine, whose efficiency approaches that of Carnot engine with the help of a regenerator. The regenerator is a heat exchanger composed of porous medium, whose performance is dependent on the pore structure. Three types of pore structures are considered in the present study. They are wire screen, random wire and composite structure, i.e. a combination of wire screens with different hydraulic diameters. The porosity more highly affects the performance of a regenerator compared to the hydraulic diameter. The random wire can yield high effectiveness even at a high porosity. The composite mesh gives better performance when the hydraulic diameter decreases in the direction from hot side to cold side.

• 에너지공학
• /
• 제25권1호
• /
• pp.9-14
• /
• 2016

본 연구는 주위의 온도보다 약 $20{\sim}30^{\circ}C$ 밖에 높지 않은 저온폐열을 활용하기 위한 TM(Thermal to Mechanical) 발전변환기의 개발을 위하여 저온도차 스털링엔진의 하나인 MM-7에 대한 성능실측 연구를 수행하였다. 스털링엔진의 흡열부와 방열부의 온도차에 대한 토크 및 분당회전수를 측정하고 이를 바탕으로 MM-7 엔진의 출력을 산출하였으며, 이를 통하여 효율적인 TM발전변환기의 개발 방안을 모색하였다.

• 한국전산유체공학회지
• /
• 제16권3호
• /
• pp.88-94
• /
• 2011

The availability of the thermal energy has been deeply recognized recently to encourage the cascade usage of thermal energy from combustion. Within the framework, a 1 kW class Stirling engine based cogeneration system has been proposed for a unit of a distributed energy system. The capacity has been designed to be adequate for the domestic usage, which requires high compactness as well as low emission and noise. To develop a highly efficient system with satisfying these requirements, a premixed slot type short flame burner has been proposed and a series of numerical simulation has been performed to establish a design tool for the combustion chamber. The thermal radiation model has been found to highly affect the computational results and a proper resolution to analyze the heat transfer characteristics of the high temperature heat exchanger. Finally, the combustion characteristics of the premixed flame with the metal fiber type burner has been studied.

• 대한기계학회논문집B
• /
• 제41권8호
• /
• pp.545-552
• /
• 2017

본 연구에서는 1 kW급 가정용 열병합 시스템의 원동기로 설계된 스털링 엔진의 고온 열교환기에 대하여 Fin 길이, 간격, 각도 등을 조정한 새로운 형상 및 기존 형상에 대하여 수치해석을 수행하여 형상 개선에 따른 성능 향상을 확인하였다. 형상을 개선하는 과정에서 고려하지 않았던 공기예열기를 포함하여 수치해석을 수행한 결과 실린더 헤드 부분에서 음의 열유속이 발생하는 현상이 관찰되었다. 배가스 온도 및 연소실 벽면 온도를 분석하여 이 현상을 규명하였다. 다음으로 이상적인 사이클을 가정하여 형상 개선에 의한 열전달량 증가가 열역학적 사이클 및 시스템 성능에 미치는 영향을 예측하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.160-160
• /
• 2003

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1197-1205
• /
• 1988

본 연구에서는 피스톤운동을 톱날파로 근사하였을 때 단열된 실린더를 갖는 스터링기관에 대한 해석적인 해를 구하고자 한다. 실제기관에서 피스톤운동은 기구 학적 구동기구에 따라 상이하지만 대략적으로 정현파가 되며, 이 경우에는 해석적인 해가 존재하지 않으므로 수학적으로 구간선형적인 톱날파로 근사하였다. 비록 이러 한 근사를 도입한 단열해석이라 하더라도 해석적인 해가 존재한다면 등온해석보다는 기관성능의 예측에 더욱 적합함은 당연하다.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.529-536
• /
• 2002

The performance of stilting engine, in particular, its energy conversion efficiencies are critically influenced by the regenerator characteristics. The regenerator characteristics are influenced by effectiveness, void fraction. heat transfer loss and fluid friction loss in the regenerator matrix. These factors were influenced by the surface geometry and material properties of the regenerator matrix. The regenerator design goals arc good heat transfer and low pressure drop of working Bas across the regenerator. Various data for designing a wire screen matrix have been given by Kays and London(1984). The mesh number of their experiment. however, was confined below the No. 60. which seems rather small for the Stirling engine applications. In this paper. in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed mettled of matrix in oscillating flow as the same condition of operation in a Stirling engine. Seven kinds of sing1e wire screen meshes were used as the regenerator matrices. The results are summarized as follows; 1. While the working fluid flew slowly in the regenerator. the temperature difference was great at the both hot-blow(the working fluid flows from healer to cooler) and cold-blow(the working fluid flows from cooler to healer). On the other hand. while the working fluid flew fast. the temperature difference was not distinguished. 2. The No.150 wire screen used as the regenerator matrix showed excellent performance than tile others. 3. Phase angle variation and filling rate affected heat transfer or regenerator matrices. 4. Temperature difference between the inlet and outlet of the regenerator is very hish in degree of 120 phase angle.