• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1347-1352
• /
• 2003

In periodic cyclic structures, small property irregularity of their substructured often causes significant difference in their dynamic responses, which results in unpredicted premature failures. The small irregularity and the resulting phenomenon are called the mistuning and the vibration localization, respectively. In this paper a simple coupled multi-pendulum system is employed to investigate the effects of the stiffness mistuning and the phase difference in excitation force on the vibration localization of periodic cyclic structures.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1355-1360
• /
• 2005

Periodic structures can be applied as a MEMS(micro-electro-mechanical system) sensor or actuator due to low energy loss and wideband frequency response. The dynamic behavior of a mistuned periodic structure Is dramatically changed from that of a perfectly tuned periodic structure. The effects of mistuning, coupling stiffness, and driving point on the forced vibration responses of a simple periodic structure ate investigate4 through numerical simulations. On the basis of that, one can design effective and reliable MEMS components using periodic structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.538-541
• /
• 2004

In turbomachinery rotor, there are small differences in the structural and/or geometrical properties of individual blades, which are referred to as blade mistuning. Mistuning effects of the forced response of bladed disks can be extremely large as often reported in many studies. In this paper, the pattern optimization of intentional mistuning for bladed disks considering with damping and coupling effect is the focus of the present investigation. More specifically, the class of intentionally mistuned disks considered here is limited, for cost reasons, to arrangements of two types of blades (A and B, say) and Genetic Algorithm is used to optimize the arrangement of these blades around the disk to reduce the forced response of blade with different damping and coupling stiffness.

• 한국소음진동공학회논문집
• /
• 제15권4호
• /
• pp.429-436
• /
• 2005

터보기계에서 mistuning은 구조적, 기하학적인 측면에서의 blade와 blade 사이의 미소한 특성차이를 의미하며, blade의 제작과정이나 운전 중 발생하는 마모의 차이에 의해 발생한다고 알려져 있다. Blade사이에서 발생하는 이러한 미소한 차이가 강제 진동 시 아주 큰 국부진동을 야기 시킬 수 있다는 사실이 여러 논문들에 의해 확인되었다. 최근에는 조화패턴의 intentional mistuning 배열을 사용하여 제작 및 사용 중에 발생하는 unintentional mistuning에 의한 blade의 강제진동 응답을 줄일 수 있다는 연구가 발표되었다. 따라서 본 논문에서는 두 가지 형태의 blade(A와 B)를 사용하고, blade감쇠와 coupling 효과를 고려하여 bladed disk의 강제진동응답을 줄일 수 있는 intentional mistuning의 최적배열패턴을 인공지능 알고리즘의 하나인 유전알고리즘과 steepest descent법을 이용하여 구하고자 한다. 그리고 단순 bladed disk와 17-bladed로 된 산업체 로터의 수치예제를 통하여 intentional mistuning 된 bladed disk의 이점을 증명하려고 한다.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1405-1413
• /
• 2005

Malfunctions or critical fatigue problems often occur in mistuned periodic structural systems since their vibration responses may become much larger than those of perfectly tuned periodic systems. These are called vibration localization phenomena and it is of great importance to accurately predict the localization phenomena for safe and reliable designs of the periodic structural systems. In this study, a simple discrete system which represents periodic structural systems is employed to analyze the vibration localization phenomena. The statistical effects of mistuning, stiffness coupling, and damping on the vibration localization phenomena are investigated through Monte Carlo simulation. It is found that the probability of vibration localization was significantly influenced by the statistical properties except the standard deviation of coupling stiffness.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.994-1000
• /
• 2002

In periodically repeated cyclic structures, small property irregularity of their substructures often causes significant difference in their dynamic responses. which results in unpredicted premature failures. The small irregularity and the resulting phenomenon are called the mistuning and the vibration localization. respectively. In this paper, the vibration localization phenomena due to mistuned coupling effects are investigated. To effectively achieve the objective, a simple coupled multi-pendulum system Is employed. The results show that if there exists some coupling stiffness irregularity, vibration localization may occur and becomes more predominant as the number of substructures increases.

• Structural Engineering and Mechanics
• /
• 제72권6호
• /
• pp.747-762
• /
• 2019

Based on the ball-screw mechanism, a tuned viscous mass damper (TVMD) has been proposed, which has functions of amplifying physical mass of the system and frequency tuning. Considering the sensitivity of a single TVMD's effectiveness to frequency mistuning like that of the conventional tuned mass damper (TMD) and according to the concept of the conventional multiple tuned mass damper (MTMD), in the present paper, multiple tuned mass viscous dampers (MTVMD) consisting of many tuned mass dampers (TVMD) with a uniform distribution of natural frequencies are considered for attenuating undesirable vibration of a structure. The MTVMD is manufactured by keeping the stiffness and damping constant and varying the mass associated with the lead of the ball-screw type inerter element in the damper. The structure is represented by its mode-generalized system in a specific vibration mode controlled using the mode reduced-order method. Modal properties and fundamental characteristics of the MTVMD-structure system are investigated analytically with the parameters, i.e., the frequency band, the average damping ratio, the tuning frequency ratio, the total number of TVMD and the total mass ratio. It is found that there exists an optimum set of the parameters that makes the frequency response curve of the structure flattened with smaller amplitudes in a wider input frequency range. The effectiveness and robustness of the MTVMD are also discussed in comparison with those of the usual single TVMD (STVMD) and the results shows that the MTVMD is more effective and robust with the same level of total mass.