• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.121-129
• /
• 2007

There has been much effort to find suitable methods for structural analysis in the mid-frequency region where traditional low frequency methods have increasing uncertainties whilst statistical energy analysis is not strictly applicable. Systems consisting of relatively stiff beams coupled to flexible plates have a particularly broad mid-frequency region where the beams support only a few modes whilst the plate has a high modal density and modal overlap. A system of two parallel beams coupled to a plate is investigated based on the wave method, which is an approximate method. Muller's method is utilised for obtaining complex roots of a dispersion wave equation, which does not converge in the conventional wave method based on a simple iteration. The wave model is extended from a single-beam-plate system, to a plate with two identical beams which is modelled using a symmetric-antisymmetric technique. The important hypothesis that the coupled beam wavenumber is sufficiently smaller than the plate free wavenumber is experimentally verified. Finally, experimental results such as powers and energy ratios show the validity of the analytical wave models.

• Geomechanics and Engineering
• /
• 제7권1호
• /
• pp.87-103
• /
• 2014

This study investigated the effect of soil-structure interaction (SSI) on the response of base-isolated buildings. Seismic isolation can significantly reduce the induced seismic loads on a relatively stiff building by introducing flexibility at its base and avoiding resonance with the predominant frequencies of common earthquakes. To provide a better understanding of the movement behavior of multi-story structures during earthquakes, this study analyzed the dynamic behavior of multi-story structures with high damping rubber bearing (HDRB) behavior base isolation systems that were built on soft soil. Various models were developed, both with and without consideration of SSI. Both the superstructure and soil were modeled linearly, but HDRB was modeled non-linearly. The behavior of the specified models under dynamic loads was analyzed using SAP2000 computer software. Erzincan, Marmara and Duzce Earthquakes were chosen as the ground motions. Following the analysis, the displacements, base shear forces, top story accelerations, base level accelerations, periods and maximum internal forces were compared in isolated and fixed-base structures with and without SSI. The results indicate that soil-structure interaction is an important factor (in terms of earthquakes) to consider in the selection of an appropriate isolator for base-isolated structures on soft soils.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.183-200
• /
• 2020

Connection of adjacent buildings with stiff links is an efficient approach for seismic pounding mitigation. However, use of highly rigid links might alter the torsional response in asymmetric plans and although this was mentioned in the literature, no quantitative study has been done before to investigate the condition numerically. In this paper, the effect of rigid coupling on the elastic lateral-torsional response of two adjacent one-story column-type buildings has been studied by comparison to uncoupled structures. Three cases are considered, including two similar asymmetric structures, two adjacent asymmetric structures with different dynamic properties and a symmetric system adjacent to an adjacent asymmetric one. After an acceptable validation against the actual earthquake, the traditional random vibration method has been utilized for dynamic analysis under Ideal white noise input. Results demonstrate that rigid coupling may increase or decrease the rotational response, depending on eccentricities, torsional-to-lateral stiffness ratios and relative uncoupled lateral stiffness of adjacent buildings. Results are also discussed for the case of using identical cross section for all columns supporting eachplan. In contrast to symmetric systems, base shear increase in the stiffer building may be avoided when the buildings lateral stiffness ratio is less than 2. However, the eccentricity increases the rotation of the plans for high rotational stiffness of the buildings.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.635-642
• /
• 2018

Braced excavation systems are commonly required to ensure stability in construction of basements for shopping malls, underground transportation and other habitation facilities. For excavations in deposits of soft clays or residual soils, stiff retaining wall systems such as diaphragm walls are commonly adopted to restrain the ground movements and wall deflections in order to prevent damage to surrounding buildings and utilities. The ground surface settlement behind the excavation is closely associated with the magnitude of basal heave and the wall deflections and is also greatly influenced by the possible groundwater drawdown caused by potential wall leakage, flow from beneath the wall, flow from perched water and along the wall interface or poor panel connections due to the less satisfactory quality. This paper numerically investigates the influences of excavation geometries, the system stiffness, the soil properties and the groundwater drawdown on ground surface settlement and develops a simplified maximum surface settlement Logarithm Regression model for the maximum ground surface settlement estimation. The settlements estimated by this model compare favorably with a number of published and instrumented records.

• Steel and Composite Structures
• /
• 제46권5호
• /
• pp.621-635
• /
• 2023

The combination of replaceable and repairable properties in structures has introduced new approach called "Low Damage Design Structures". These structural systems are designed in such a way that through self-centering, primary members and specific connections neither suffer damage nor experience permanent deformations after being exposed to severe earthquakes. The purpose of this study is the seismic assessment of steel moment resisting frames with the aid of rigid rocking cores. To this end, three steel moment resisting frames of 4-, 8-, and 12-story buildings with and without rocking cores were developed. The nonlinear static analysis and incremental dynamic analysis were performed by considering the effects of the vertical and horizontal components of 16 strong ground motions, including far-fault and near-fault arrays. The results reveal that rocking systems benefit from better seismic performance and energy dissipation compared to moment resisting frames and thus structures experience a lower level of damage under higher intensity measures. The analyses show that the interstory drift in structures equipped with stiff rocking cores is more uniform in static and dynamic analyses. A uniform interstory drift distribution leads to a uniform distribution of the bending moment and a reduction in the structure's total weight and future maintenance costs.

• 한국지진공학회논문집
• /
• 제12권5호
• /
• pp.23-29
• /
• 2008

강도한계 이선형 단자유도 시스템의 지진 하중 하에서의 동적 불안정에 대해 연구하였다. 강도한계 이선형 이력 모델은 철골 모멘트 골조의 이력거동을 가장 잘 모사한다. 단자유도 시스템의 동적 불안정을 판단하기 위해 붕괴 강도비를 사용하였고, 이것은 붕괴가 일어날 때의 항복강도 저감계수이다. 단단한 지반에서 측정된 240개의 지진을 이용하고 고유주기, 강성 경화 기울기, 음강성 기울기, 연성 그리고 $2{\sim}20%$의 감쇠비를 변수로 하여 강도한계 이선형 단자유도 시스템의 붕괴 강도비의 평균과 편차 값들을 구할 수 있도록 통계 분석을 하였다. 비선형 회귀분석을 통해 강도한계 이선형 단자유도 시스템의 붕괴 강도비의 평균과 표준편차를 계산할 수 있는 식을 구하였다. 제안한 식을 이용하여 붕괴 강도비의 확률적 분포를 구하였고, 실제 값과 비교하여 제안한 식의 정확성을 입증하였다.

• 한국항행학회논문지
• /
• 제15권1호
• /
• pp.147-156
• /
• 2011

IATA(International Air Transport Association, 국제항공운송협회)를 중심으로 항공사 시스템과 연계하여 공항 탑승수속 및 보딩업무를 지원하는 공용시스템 국제 기술표준을 기존의 CUTE(Common Use Terminal Equipment)에서 개선된 CUPPS(Common Use Passenger Processing Systems)로의 전환을 추진 중이다. IATA는 향후 공항 공용시스템의 CUPPS 전환 시 탑승수속 및 보딩업무 관련 각종 장비에 대한 표준 인터페이스 구현 및 항공사 어플리케이션 인증을 통해 항공사의 공용시스템 관련 개발 및 유지보수 비용이 감소될 것으로 예상하고 있다. 인천국제공항은 동북아 주요 공항들과 항공사 유치를 위해 치열하게 경쟁하고 있는 상황에서 항공사의 비용절감 효과를 기대할 수 있는 공항 공용시스템의 CUPPS 전환은 필수적이다. 이에 본 연구에서는 CUPPS 국제 기술표준을 기반으로 사용자의 요구사항에 따라 다양한 기능을 지원할 수 있는 인천국제공항의 컴포넌트(Component) 기반 차세대 공용여객처리시스템의 설계와 구현방안을 제시한다.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.143-155
• /
• 2010

Fouling by inorganic scales needs to be prevented to effectively operate sea water reverse osmosis(SWRO) membrane systems. The extents of inorganic scaling with different array designs including one-pass, two-pass and several hybrid designs were evaluated using seawater from southern sea near the city of Chang-Won. The used methods for evaluation were Stiff and Davis Index(S&DSI) calculation and several laboratory experiments. The formation potential of inorganic scale fouling was quite great under the examined conditions, which was confirmed by the laboratory experimental results. The inorganic scale was not avoidable fouling if any anti-scaling measures were not applied. The RO showed decreased flux under the scale formation conditions. The increases in S&DSI from 1.43 to 5 made small decreases in flux, which indicated that formation of inorganic scales had more substantial effects on RO flux than amount of inorganic scales.

• 한국환경과학회지
• /
• 제16권8호
• /
• pp.907-912
• /
• 2007

Ion exchange resin was used to remove silica ion at ultralow concentration. The effects of temperature, type of ion exchange resin and single/mixed-resin systems on removal efficiency were estimated. As temperature increased, the slope of concentration profile became stiff, and the equilibrium concentration was higher. In the single resin system, the removal of silica was continued up to 400 min, but the silica concentration was recovered to initial concentration after 400 min due to the effect of dissolved $CO_2$. In the mixed-resin system it took about 600 min to reach equilibrium. Because of faster cation exchange reaction than anion exchange reaction, the effect of $CO_2$ could be removed. Based on the experimental results carried out in the mixed-resin system, the selectivity coefficients of silica ion for each ion exchange resin were calculated at some specific temperatures. The temperature dependency of the selectivity coefficient was expressed by the equation of Kraus-Raridon type.

• Smart Structures and Systems
• /
• 제11권3호
• /
• pp.241-259
• /
• 2013

This paper presents the optimum load-speed diagram evaluation for a linear micromotor, including multitude cantilever piezoelectric bimorphs, briefly. Each microbeam in the mechanism can be actuated in both axial and flexural modes simultaneously. For this design, we consider quasi-static and linear conditions, and a relatively new numerical method called the smoothed finite element method (S-FEM) is introduced here. For this purpose, after finding an optimum volume fraction for piezoelectric layers through a standard numerical method such as quadratic finite element method, the relevant load-speed curves of the optimized micromotor are examined and compared by deterministic topology optimization (DTO) design. In this regard, to avoid the overly stiff behavior in FEM modeling, a numerical method known as the cell-based smoothed finite element method (CS-FEM, as a branch of S-FEM) is applied for our DTO problem. The topology optimization procedure to find the optimal design is implemented using a solid isotropic material with a penalization (SIMP) approximation and a method of moving asymptotes (MMA) optimizer. Because of the higher efficiency and accuracy of S-FEMs with respect to standard FEMs, the main micromotor characteristics of our final DTO design using a softer CS-FEM are substantially improved.